Hi Marek, you are right. Reviewed-by: Andreas Kemnade <andreas@xxxxxxxxxxxx> On Tue, 4 Jul 2023 22:29:29 +0200 Marek Vasut <marex@xxxxxxx> wrote: > Since the chip can drive up to 6 lines, the maximum > register number should be only 5, not 6. > > Signed-off-by: Marek Vasut <marex@xxxxxxx> > --- > Cc: Andreas Kemnade <andreas@xxxxxxxxxxxx> > Cc: Conor Dooley <conor+dt@xxxxxxxxxx> > Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@xxxxxxxxxx> > Cc: Lee Jones <lee@xxxxxxxxxx> > Cc: Pavel Machek <pavel@xxxxxx> > Cc: Rob Herring <robh+dt@xxxxxxxxxx> > Cc: devicetree@xxxxxxxxxxxxxxx > Cc: linux-leds@xxxxxxxxxxxxxxx > --- > Documentation/devicetree/bindings/leds/rohm,bd2606mvv.yaml | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/leds/rohm,bd2606mvv.yaml b/Documentation/devicetree/bindings/leds/rohm,bd2606mvv.yaml > index 14700a2e5feaa..44dd91aa239de 100644 > --- a/Documentation/devicetree/bindings/leds/rohm,bd2606mvv.yaml > +++ b/Documentation/devicetree/bindings/leds/rohm,bd2606mvv.yaml > @@ -35,7 +35,7 @@ properties: > description: GPIO pin to enable/disable the device. > > patternProperties: > - "^led@[0-6]$": > + "^led@[0-5]$": > type: object > $ref: common.yaml# > unevaluatedProperties: false > @@ -43,7 +43,7 @@ patternProperties: > properties: > reg: > minimum: 0 > - maximum: 6 > + maximum: 5 > > required: > - reg
