Hi Thorsten,
all mentioned kernels are vanilla kernels. The "-bpi-r2" is only a
suffix from CONFIG_LOCALVERSION="-bpi-r2"
I will bisect on weekend and come back to you.
regards
Tobias
Am 21.03.23 um 15:40 schrieb Linux regression tracking (Thorsten Leemhuis):
On 20.03.23 20:44, Tobias Dahms wrote:
Hello,
since some kernel versions I get a kernel errror while setting led
trigger to phy0tpt.
command to reproduce:
echo phy0tpt > /sys/class/leds/bpi-r2\:isink\:blue/trigger
same trigger, other led location => no error:
echo phy0tpt > /sys/class/leds/bpi-r2\:pio\:blue/trigger
other trigger, same led location => no error:
echo phy0tx > /sys/class/leds/bpi-r2\:isink\:blue/trigger
last good kernel:
bpi-r2 5.19.17-bpi-r2
error at kernel versions:
bpi-r2 6.0.19-bpi-r2
up to
bpi-r2 6.3.0-rc1-bpi-r2+
Thx for the report.
"5.19.17-bpi-r2" sounds like a vendor kernel. Is that one that is
vanilla or at least close to vanilla? If not, you'll have to report this
to your kernel vendor. If not: could you try to bisect this?
wireless lan card:
01:00.0 Network controller: MEDIATEK Corp. MT7612E 802.11acbgn PCI
Express Wireless Network Adapter
distribution:
Arch-Linux-ARM (with vanilla kernel instead of original distribution
kernel)
board:
BananaPi-R2
Ciao, Thorsten (wearing his 'the Linux kernel's regression tracker' hat)
--
Everything you wanna know about Linux kernel regression tracking:
https://linux-regtracking.leemhuis.info/about/#tldr
If I did something stupid, please tell me, as explained on that page.
