Hi Kate - sorry just noticed one more thing...
On 10/03/2023 09:56, Kate Hsuan wrote:
There are two LED controllers, LEDA indicator LED and LEDB flash LED for
tps68470. LEDA can be enabled by setting TPS68470_ILEDCTL_ENA. Moreover,
tps68470 provides four levels of power status for LEDB. If the
properties called "ti,ledb-current" can be found, the current will be
set according to the property values. These two LEDs can be controlled
through the LED class of sysfs (tps68470-leda and tps68470-ledb).
Signed-off-by: Kate Hsuan <hpa@xxxxxxxxxx>
---
drivers/leds/Kconfig | 12 +++
drivers/leds/Makefile | 1 +
drivers/leds/leds-tps68470.c | 182 +++++++++++++++++++++++++++++++++++
3 files changed, 195 insertions(+)
create mode 100644 drivers/leds/leds-tps68470.c
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 9dbce09eabac..fd26036b3c61 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -827,6 +827,18 @@ config LEDS_TPS6105X
It is a single boost converter primarily for white LEDs and
audio amplifiers.
+config LEDS_TPS68470
+ tristate "LED support for TI TPS68470"
+ depends on LEDS_CLASS
+ depends on INTEL_SKL_INT3472
+ help
+ This driver supports TPS68470 PMIC with LED chip.
+ It provide two LED controllers, including an indicator LED
+ and a flash LED.
+
+ To compile this driver as a module, choose M and it will be
+ called leds-tps68470
+
config LEDS_IP30
tristate "LED support for SGI Octane machines"
depends on LEDS_CLASS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index d30395d11fd8..b284bc0daa98 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -84,6 +84,7 @@ obj-$(CONFIG_LEDS_TURRIS_OMNIA) += leds-turris-omnia.o
obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o
obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o
obj-$(CONFIG_LEDS_WRAP) += leds-wrap.o
+obj-$(CONFIG_LEDS_TPS68470) += leds-tps68470.o
Alphabetical order here too please :)
