On Sat, 07 Jan 2023, Jacek Anaszewski wrote:
> Hi all,
>
> On 1/4/23 17:20, Lee Jones wrote:
> > On Fri, 09 Dec 2022, Uwe Kleine-König wrote:
> >
> > > On Fri, Dec 09, 2022 at 10:10:38AM +1000, Qingtao Cao wrote:
> > > > The Marvell GPIO controller's driver will setup its struct gpio_chip's can_sleep
> > > > false, making create_gpio_led() setting up the brightness_set function pointer
> > > > instead of the brightness_set_blocking function pointer. In this case the
> > > > nonblocking version led_set_brightness() should be fallen back on by ledtrig_tty_work()
> > > >
> > > > Signed-off-by: Qingtao Cao <qingtao.cao@xxxxxxxx>
> > > > ---
> > > > drivers/leds/trigger/ledtrig-tty.c | 10 ++++++++--
> > > > 1 file changed, 8 insertions(+), 2 deletions(-)
> > > >
> > > > diff --git a/drivers/leds/trigger/ledtrig-tty.c b/drivers/leds/trigger/ledtrig-tty.c
> > > > index f62db7e520b5..e43d285b5d06 100644
> > > > --- a/drivers/leds/trigger/ledtrig-tty.c
> > > > +++ b/drivers/leds/trigger/ledtrig-tty.c
> > > > @@ -122,12 +122,18 @@ static void ledtrig_tty_work(struct work_struct *work)
> > > > if (icount.rx != trigger_data->rx ||
> > > > icount.tx != trigger_data->tx) {
> > > > - led_set_brightness_sync(trigger_data->led_cdev, LED_ON);
> > > > + if (trigger_data->led_cdev->brightness_set_blocking)
> > > > + led_set_brightness_sync(trigger_data->led_cdev, LED_ON);
> > > > + else if (trigger_data->led_cdev->brightness_set)
> > > > + led_set_brightness(trigger_data->led_cdev, LED_ON);
> > >
> > > I had similar issues in the past where a function call worked for
> > > sleeping LEDs but not atomic ones (or the other way around? Don't
> > > remember the details.)
> > >
> > > I wonder if there isn't a function that does the right thing no matter
> > > what type the LED is. The other triggers should have the same issue, and
> > > doing the above check in all of them just looks wrong.
> >
> > Anyone fancy taking a deeper dive into this?
> >
> > I'd usually have a go myself, but I'm presently swamped.
> >
> > Pavel already has an idea?
> >
>
> There is led_set_brightness_nosleep() and it should be used here
> from the beginning. Generally it should be used always in triggers.
Thanks for helping to keep an eye on things Jacek.
Much appreciated.
--
Lee Jones [李琼斯]
