From: Arnd Bergmann <arnd@xxxxxxxx> Since ASIC3 MFD driver is removed, the LED support is also obsolete. Cc: Paul Parsons <lost.distance@xxxxxxxxx> Cc: Pavel Machek <pavel@xxxxxx> Cc: Lee Jones <lee@xxxxxxxxxx> Cc: linux-leds@xxxxxxxxxxxxxxx Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx> --- drivers/leds/Kconfig | 11 --- drivers/leds/Makefile | 1 - drivers/leds/leds-asic3.c | 177 -------------------------------------- 3 files changed, 189 deletions(-) delete mode 100644 drivers/leds/leds-asic3.c diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index be2eeb3d6fd3..9dbce09eabac 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -623,17 +623,6 @@ config LEDS_NETXBIG and 5Big Network v2 boards. The LEDs are wired to a CPLD and are controlled through a GPIO extension bus. -config LEDS_ASIC3 - bool "LED support for the HTC ASIC3" - depends on LEDS_CLASS=y - depends on MFD_ASIC3 - default y - help - This option enables support for the LEDs on the HTC ASIC3. The HTC - ASIC3 LED GPIOs are inputs, not outputs, thus the leds-gpio driver - cannot be used. This driver supports hardware blinking with an on+off - period from 62ms to 125s. Say Y to enable LEDs on the HP iPAQ hx4700. - config LEDS_TCA6507 tristate "LED Support for TCA6507 I2C chip" depends on LEDS_CLASS && I2C diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index a790c967fce9..d30395d11fd8 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -14,7 +14,6 @@ obj-$(CONFIG_LEDS_ADP5520) += leds-adp5520.o obj-$(CONFIG_LEDS_AN30259A) += leds-an30259a.o obj-$(CONFIG_LEDS_APU) += leds-apu.o obj-$(CONFIG_LEDS_ARIEL) += leds-ariel.o -obj-$(CONFIG_LEDS_ASIC3) += leds-asic3.o obj-$(CONFIG_LEDS_AW2013) += leds-aw2013.o obj-$(CONFIG_LEDS_BCM6328) += leds-bcm6328.o obj-$(CONFIG_LEDS_BCM6358) += leds-bcm6358.o diff --git a/drivers/leds/leds-asic3.c b/drivers/leds/leds-asic3.c deleted file mode 100644 index 8cbc1b8bafa5..000000000000 -- 2.39.0
