On 22/12/15 08:31PM, Christophe JAILLET wrote:
> Le 14/12/2022 à 23:25, Joseph Strauss a écrit :
> > Added multicolor support to the BlinkM driver, making it easier to
> > control from userspace. The BlinkM LED is a programmable RGB LED. The
> > driver currently supports only the regular LED sysfs class, resulting in
> > the creation of three distinct classes, one for red, green, and blue.
> > The user then has to input three values into the three seperate
> > brightness files within those classes. The multicolor LED framework
> > makes the device easier to control with the multi_intensity file: the
> > user can input three values at once to form a color, while still
> > controlling the lightness with the brightness file.
> >
> > The main struct blinkm_led has changed slightly. A struct
> > led_classdev_mc has been added to represent the multicolor sysfs class,
> > and an additional struct led_classdev pointer has been added for
> > convenience, which points to the struct led_classdev within struct
> > led_classdev_mc. The struct led_classdev for the regular sysfs classes
> > remain. Additionally, a field representing the multicolor LED has been
> > added to the struct blinkm_data, seperate from the blinkm_leds[3] array.
> >
> > In the blinkm_probe function, the multicolor LED class is registered
> > after the regular LED classes. The blinkm_set_brightness_mc() function
> > had to be added to calculate the three color components and then set the
> > fields of the blinkm_data structure accordingly.
> >
> > Signed-off-by: Joseph Strauss <jstrauss16@xxxxxxxxx>
>
> Hi,
>
> a few nits below, should it help.
>
> CJ
>
> >
> > ---
> > Documentation/leds/leds-blinkm.rst | 24 ++++-
> > drivers/leds/Kconfig | 1 +
> > drivers/leds/leds-blinkm.c | 154 ++++++++++++++++++++++++-----
> > 3 files changed, 151 insertions(+), 28 deletions(-)
> >
> > diff --git a/Documentation/leds/leds-blinkm.rst b/Documentation/leds/leds-blinkm.rst
> > index c74b5bc877b1..3f5dbd5e97b0 100644
> > --- a/Documentation/leds/leds-blinkm.rst
> > +++ b/Documentation/leds/leds-blinkm.rst
> > @@ -13,9 +13,27 @@ The device accepts RGB and HSB color values through separate commands.
> > Also you can store blinking sequences as "scripts" in
> > the controller and run them. Also fading is an option.
> >
> > -The interface this driver provides is 2-fold:
> > +The interface this driver provides is 3-fold:
> >
> > -a) LED class interface for use with triggers
> > +a) LED multicolor class interface for use with triggers
> > +#######################################################
> > +
> > +The registration follows the scheme::
> > +
> > + blinkm-<i2c-bus-nr>-<i2c-device-nr>-multi
> > +
> > + $ ls -h /sys/class/leds/blinkm-1-9-multi
> > + brightness device max_brightness multi_index multi_intensity power subsystem trigger uevent
> > +
> > +The order in which to write the intensity values can be found in multi_index.
> > +Exactly three values between 0 and 255 must be written to multi_intensity to change the color::
> > +
> > + $ echo 255 100 50 > multi_intensity
> > +
> > +The overall brightness of the color that you choose can also be changed by
> > +writing a value between 0 and 255 to the brightness file.
> > +
> > +b) LED class interface for use with triggers
> > ############################################
> >
> > The registration follows the scheme::
> > @@ -50,7 +68,7 @@ E.g.::
> > $
> >
> >
> > -b) Sysfs group to control rgb, fade, hsb, scripts ...
> > +c) Sysfs group to control rgb, fade, hsb, scripts ...
> > #####################################################
> >
> > This extended interface is available as folder blinkm
> > diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> > index b6742b4231bf..6f73deb7d95c 100644
> > --- a/drivers/leds/Kconfig
> > +++ b/drivers/leds/Kconfig
> > @@ -787,6 +787,7 @@ comment "LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_T
> > config LEDS_BLINKM
> > tristate "LED support for the BlinkM I2C RGB LED"
> > depends on LEDS_CLASS
> > + depends on LEDS_CLASS_MULTICOLOR
> > depends on I2C
> > help
> > This option enables support for the BlinkM RGB LED connected
> > diff --git a/drivers/leds/leds-blinkm.c b/drivers/leds/leds-blinkm.c
> > index b4e1fdff4186..a78bcc2eaff3 100644
> > --- a/drivers/leds/leds-blinkm.c
> > +++ b/drivers/leds/leds-blinkm.c
> > @@ -15,6 +15,9 @@
> > #include <linux/pm_runtime.h>
> > #include <linux/leds.h>
> > #include <linux/delay.h>
> > +#include <linux/led-class-multicolor.h>
> > +
> > +#define NUM_LEDS 3
> >
> > /* Addresses to scan - BlinkM is on 0x09 by default*/
> > static const unsigned short normal_i2c[] = { 0x09, I2C_CLIENT_END };
> > @@ -22,19 +25,26 @@ static const unsigned short normal_i2c[] = { 0x09, I2C_CLIENT_END };
> > static int blinkm_transfer_hw(struct i2c_client *client, int cmd);
> > static int blinkm_test_run(struct i2c_client *client);
> >
> > +/* Contains data structures for both the color-seperated sysfs classes, and the new multicolor class */
> > struct blinkm_led {
> > struct i2c_client *i2c_client;
> > - struct led_classdev led_cdev;
> > + struct led_classdev monochrome_led_cdev;
> > + /* points to struct led_classdev inside of struct led_classdev_mc */
> > + struct led_classdev *led_cdev;
> > + struct led_classdev_mc mcled_cdev;
> > int id;
> > };
> >
> > -#define cdev_to_blmled(c) container_of(c, struct blinkm_led, led_cdev)
> > +#define monochrome_led_cdev_to_blmled(c) container_of(c, struct blinkm_led, monochrome_led_cdev)
> > +#define mcled_cdev_to_led(c) container_of(c, struct blinkm_led, mcled_cdev)
> >
> > struct blinkm_data {
> > struct i2c_client *i2c_client;
> > struct mutex update_lock;
> > /* used for led class interface */
> > + struct blinkm_led mc_blinkm_led;
> > struct blinkm_led blinkm_leds[3];
>
> s/3/NUM_LEDS/ ?
>
> > +
> > /* used for "blinkm" sysfs interface */
> > u8 red; /* color red */
> > u8 green; /* color green */
> > @@ -260,9 +270,9 @@ static ssize_t test_show(struct device *dev, struct device_attribute *attr,
> > static ssize_t test_store(struct device *dev, struct device_attribute *attr,
> > const char *buf, size_t count)
> > {
> > -
> > struct i2c_client *client;
> > int ret;
> > +
>
> Such things should be part of another patch, because it is unrelated.
>
> > client = to_i2c_client(dev);
> >
> > /*test */
> > @@ -317,6 +327,7 @@ static int blinkm_read(struct i2c_client *client, int cmd, u8 *arg)
> > int result;
> > int i;
> > int retlen = blinkm_cmds[cmd].nr_ret;
> > +
>
> Ditto
>
> > for (i = 0; i < retlen; i++) {
> > /* repeat for retlen */
> > result = i2c_smbus_read_byte(client);
> > @@ -419,11 +430,53 @@ static int blinkm_transfer_hw(struct i2c_client *client, int cmd)
> > return 0;
> > }
> >
> > +static int blinkm_set_mc_brightness(struct led_classdev *led_cdev,
> > + enum led_brightness value)
> > +{
> > + struct led_classdev_mc *mcled_cdev;
> > + struct blinkm_led *led;
> > + struct blinkm_data *data;
> > + int i;
> > +
> > + mcled_cdev = lcdev_to_mccdev(led_cdev);
> > + led = mcled_cdev_to_led(mcled_cdev);
> > + data = i2c_get_clientdata(led->i2c_client);
> > +
> > + led_mc_calc_color_components(mcled_cdev, value);
> > +
> > + for (i = 0; i < NUM_LEDS; i++) {
> > + switch (i) {
> > + case RED:
> > + if (data->next_red == (u8) mcled_cdev->subled_info[i].brightness)
> > + break;
> > + data->next_red = (u8) mcled_cdev->subled_info[i].brightness;
> > + break;
> > + case GREEN:
> > + if (data->next_green == (u8) mcled_cdev->subled_info[i].brightness)
> > + break;
> > + data->next_green = (u8) mcled_cdev->subled_info[i].brightness;
> > + break;
> > + case BLUE:
> > + if (data->next_blue == (u8) mcled_cdev->subled_info[i].brightness)
> > + break;
> > + data->next_blue = (u8) mcled_cdev->subled_info[i].brightness;
> > + break;
> > + }
> > + }
>
> Does it really worth all these LoC?
>
> Is this enough?
> data->next_red = (u8)mcled_cdev->subled_info[RED].brightness;
> data->next_green = (u8)mcled_cdev->subled_info[GREEN].brightness;
> data->next_blue = (u8)mcled_cdev->subled_info[BLUE].brightness;
>
> > + blinkm_transfer_hw(led->i2c_client, BLM_GO_RGB);
> > + dev_dbg(&led->i2c_client->dev,
> > + "# DONE # next_red = %d, next_green = %d,"
> > + " next_blue = %d\n",
>
> Keep the string on the same line.
>
> > + data->next_red, data->next_green,
> > + data->next_blue);
> > + return 0;
> > +}
> > +
> > static int blinkm_led_common_set(struct led_classdev *led_cdev,
> > enum led_brightness value, int color)
> > {
> > /* led_brightness is 0, 127 or 255 - we just use it here as-is */
> > - struct blinkm_led *led = cdev_to_blmled(led_cdev);
> > + struct blinkm_led *led = monochrome_led_cdev_to_blmled(led_cdev);
> > struct blinkm_data *data = i2c_get_clientdata(led->i2c_client);
> >
> > switch (color) {
> > @@ -570,7 +623,11 @@ static int blinkm_probe(struct i2c_client *client,
> > const struct i2c_device_id *id)
> > {
> > struct blinkm_data *data;
> > - struct blinkm_led *led[3];
> > + /* For multicolor support */
> > + struct blinkm_led *mc_led;
> > + struct mc_subled *mc_led_info;
> > + /* 3 seperate classes for red, green, and blue respectively */
> > + struct blinkm_led *leds[3];
>
> s/3/NUM_LEDS/ ?
>
> > int err, i;
> > char blinkm_led_name[28];
> >
> > @@ -581,6 +638,12 @@ static int blinkm_probe(struct i2c_client *client,
> > goto exit;
> > }
> >
> > + mc_led_info = devm_kmalloc_array(&client->dev, 3, sizeof(*mc_led_info),
>
> s/3/NUM_LEDS/ ?
> s/devm_kmalloc_array(...|__GFP_ZERO)/devm_kcalloc/ ?
>
> > + GFP_KERNEL | __GFP_ZERO);
> > + if (!mc_led_info) {
> > + err = -ENOMEM;
> > + goto exit;
> > + }
> > data->i2c_addr = 0x08;
> > /* i2c addr - use fake addr of 0x08 initially (real is 0x09) */
> > data->fw_ver = 0xfe;
> > @@ -599,28 +662,30 @@ static int blinkm_probe(struct i2c_client *client,
> > goto exit;
> > }
> >
> > +
> > + /* Register red, green, and blue sysfs classes */
> > for (i = 0; i < 3; i++) {
>
> s/3/NUM_LEDS/?
>
> > /* RED = 0, GREEN = 1, BLUE = 2 */
> > - led[i] = &data->blinkm_leds[i];
> > - led[i]->i2c_client = client;
> > - led[i]->id = i;
> > - led[i]->led_cdev.max_brightness = 255;
> > - led[i]->led_cdev.flags = LED_CORE_SUSPENDRESUME;
> > + leds[i] = &data->blinkm_leds[i];
> > + leds[i]->i2c_client = client;
> > + leds[i]->id = i;
> > + leds[i]->monochrome_led_cdev.max_brightness = 255;
> > + leds[i]->monochrome_led_cdev.flags = LED_CORE_SUSPENDRESUME;
> > switch (i) {
> > case RED:
> > snprintf(blinkm_led_name, sizeof(blinkm_led_name),
> > "blinkm-%d-%d-red",
> > client->adapter->nr,
> > client->addr);
> > - led[i]->led_cdev.name = blinkm_led_name;
> > - led[i]->led_cdev.brightness_set_blocking =
> > + leds[i]->monochrome_led_cdev.name = blinkm_led_name;
> > + leds[i]->monochrome_led_cdev.brightness_set_blocking =
> > blinkm_led_red_set;
> > err = led_classdev_register(&client->dev,
> > - &led[i]->led_cdev);
> > + &leds[i]->monochrome_led_cdev);
> > if (err < 0) {
> > dev_err(&client->dev,
> > "couldn't register LED %s\n",
> > - led[i]->led_cdev.name);
> > + leds[i]->monochrome_led_cdev.name);
> > goto failred;
> > }
> > break;
> > @@ -629,15 +694,15 @@ static int blinkm_probe(struct i2c_client *client,
> > "blinkm-%d-%d-green",
> > client->adapter->nr,
> > client->addr);
> > - led[i]->led_cdev.name = blinkm_led_name;
> > - led[i]->led_cdev.brightness_set_blocking =
> > + leds[i]->monochrome_led_cdev.name = blinkm_led_name;
> > + leds[i]->monochrome_led_cdev.brightness_set_blocking =
> > blinkm_led_green_set;
> > err = led_classdev_register(&client->dev,
> > - &led[i]->led_cdev);
> > + &leds[i]->monochrome_led_cdev);
>
> Keep the original indentation.
>
> > if (err < 0) {
> > dev_err(&client->dev,
> > "couldn't register LED %s\n",
> > - led[i]->led_cdev.name);
> > + leds[i]->monochrome_led_cdev.name);
> > goto failgreen;
> > }
> > break;
> > @@ -646,34 +711,72 @@ static int blinkm_probe(struct i2c_client *client,
> > "blinkm-%d-%d-blue",
> > client->adapter->nr,
> > client->addr);
> > - led[i]->led_cdev.name = blinkm_led_name;
> > - led[i]->led_cdev.brightness_set_blocking =
> > + leds[i]->monochrome_led_cdev.name = blinkm_led_name;
> > + leds[i]->monochrome_led_cdev.brightness_set_blocking =
> > blinkm_led_blue_set;
> > err = led_classdev_register(&client->dev,
> > - &led[i]->led_cdev);
> > + &leds[i]->monochrome_led_cdev);
>
> Keep the original indentation.
>
> > if (err < 0) {
> > dev_err(&client->dev,
> > "couldn't register LED %s\n",
> > - led[i]->led_cdev.name);
> > + leds[i]->monochrome_led_cdev.name);
> > goto failblue;
> > }
> > break;
> > } /* end switch */
> > } /* end for */
> >
> > +
> > +
>
> One NL is enough.
>
> > + /* Register multicolor sysfs class */
> > + mc_led = &data->mc_blinkm_led;
> > + mc_led->i2c_client = client;
> > + mc_led->id = 4;
>
> Why 4?
> NUM_LEDS+1?
>
> > +
> > + mc_led_info[0].color_index = LED_COLOR_ID_RED;
> > + mc_led_info[0].channel = 0;
> > + mc_led_info[1].color_index = LED_COLOR_ID_GREEN;
> > + mc_led_info[1].channel = 1;
> > + mc_led_info[2].color_index = LED_COLOR_ID_BLUE;
> > + mc_led_info[2].channel = 2;
> > + mc_led->mcled_cdev.subled_info = mc_led_info;
> > + mc_led->mcled_cdev.num_colors = NUM_LEDS;
> > +
> > + mc_led->led_cdev = &mc_led->mcled_cdev.led_cdev;
> > + mc_led->led_cdev->brightness = 255;
> > + mc_led->led_cdev->max_brightness = 255;
> > + mc_led->led_cdev->flags = LED_CORE_SUSPENDRESUME;
> > + snprintf(blinkm_led_name, sizeof(blinkm_led_name),
> > + "blinkm-%d-%d-multi",
> > + client->adapter->nr,
> > + client->addr);
> > + mc_led->led_cdev->name = blinkm_led_name;
> > + mc_led->led_cdev->brightness_set_blocking =
> > + blinkm_set_mc_brightness;
> > +
> > + err = led_classdev_multicolor_register(&client->dev, &mc_led->mcled_cdev);
> > + if (err < 0) {
> > + dev_err(&client->dev, "couldn't register LED %s\n",
> > + mc_led->led_cdev->name);
> > + goto failmulti;
> > + }
> > /* Initialize the blinkm */
> > blinkm_init_hw(client);
> >
> > return 0;
> >
> > +failmulti:
> > + led_classdev_unregister(&leds[BLUE]->monochrome_led_cdev);
> > +
> > failblue:
> > - led_classdev_unregister(&led[GREEN]->led_cdev);
> > + led_classdev_unregister(&leds[GREEN]->monochrome_led_cdev);
> >
> > failgreen:
> > - led_classdev_unregister(&led[RED]->led_cdev);
> > + led_classdev_unregister(&leds[RED]->monochrome_led_cdev);
> >
> > failred:
> > sysfs_remove_group(&client->dev.kobj, &blinkm_group);
> > +
> > exit:
> > return err;
> > }
> > @@ -685,8 +788,9 @@ static int blinkm_remove(struct i2c_client *client)
> > int i;
> >
> > /* make sure no workqueue entries are pending */
> > + led_classdev_unregister(&data->mc_blinkm_led.mcled_cdev.led_cdev);
> > for (i = 0; i < 3; i++)
>
> s/3/NUM_LEDS/?
>
> > - led_classdev_unregister(&data->blinkm_leds[i].led_cdev);
> > + led_classdev_unregister(&data->blinkm_leds[i].monochrome_led_cdev);
> >
> > /* reset rgb */
> > data->next_red = 0x00;
>
Hi!
Thank you very much for reviewing my patch. I will be sure to make those
changes, as they were mostly small oversights and silly mistakes.
Best Regards,
Joe
