Hi Christian,
On Thu, 2022-12-15 at 00:54 +0100, Christian Marangi wrote:
> Add LEDs support for qca8k Switch Family. This will provide the LEDs
> hardware API to permit the PHY LED to support hardware mode.
> Each port have at least 3 LEDs and they can HW blink, set on/off or
> follow blink modes configured with the LED in hardware mode.
> Adds support for leds netdev trigger to support hardware triggers.
>
> Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
> ---
> drivers/net/dsa/qca/Kconfig | 9 +
> drivers/net/dsa/qca/Makefile | 1 +
> drivers/net/dsa/qca/qca8k-8xxx.c | 4 +
> drivers/net/dsa/qca/qca8k-leds.c | 406
> +++++++++++++++++++++++++++++++
> drivers/net/dsa/qca/qca8k.h | 62 +++++
> 5 files changed, 482 insertions(+)
> create mode 100644 drivers/net/dsa/qca/qca8k-leds.c
>
>
> diff --git a/drivers/net/dsa/qca/qca8k-leds.c
> b/drivers/net/dsa/qca/qca8k-leds.c
> new file mode 100644
> index 000000000000..b51cdcae31b2
> --- /dev/null
> +++ b/drivers/net/dsa/qca/qca8k-leds.c
> @@ -0,0 +1,406 @@
> +// SPDX-License-Identifier: GPL-2.0
> +#include <net/dsa.h>
> +#include <linux/regmap.h>
Alphabatical order
> +
> +#include "qca8k.h"
> +
> +static int
> +qca8k_get_enable_led_reg(int port_num, int led_num, struct
> qca8k_led_pattern_en *reg_info)
> +{
> + int shift;
> +
> + switch (port_num) {
> + case 0:
> + reg_info->reg = QCA8K_LED_CTRL_REG(led_num);
> + reg_info->shift = 14;
Any macros other than magic number for 14, 30
> + break;
> + case 1:
> + case 2:
> + case 3:
> + reg_info->reg = QCA8K_LED_CTRL_REG(3);
> + shift = 2 * led_num + (6 * (port_num - 1));
> +
> + reg_info->shift = 8 + shift;
> +
> + break;
> + case 4:
> + reg_info->reg = QCA8K_LED_CTRL_REG(led_num);
> + reg_info->shift = 30;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
>
> +
> +static void
> +qca8k_led_brightness_set(struct qca8k_led *led,
> + enum led_brightness b)
variable name other than b to have readability in code
> +{
> + struct qca8k_led_pattern_en reg_info;
> + struct qca8k_priv *priv = led->priv;
> + u32 val = QCA8K_LED_ALWAYS_OFF;
> +
> + qca8k_get_enable_led_reg(led->port_num, led->led_num,
> ®_info);
> +
> + if (b)
> + val = QCA8K_LED_ALWAYS_ON;
> +
> + regmap_update_bits(priv->regmap, reg_info.reg,
> + GENMASK(1, 0) << reg_info.shift,
GENMASK(1, 0) used in multiple place, replace with macro for
readability
> + val << reg_info.shift);
> +}
> +
>
> +
> +static int
> +qca8k_cled_trigger_offload(struct led_classdev *ldev, bool enable)
> +{
> + struct qca8k_led *led = container_of(ldev, struct qca8k_led,
> cdev);
> +
Blank line
> + struct qca8k_led_pattern_en reg_info;
> + struct qca8k_priv *priv = led->priv;
> + u32 val = QCA8K_LED_ALWAYS_OFF;
> +
> + qca8k_get_enable_led_reg(led->port_num, led->led_num,
> ®_info);
> +
> + if (enable)
> + val = QCA8K_LED_RULE_CONTROLLED;
> +
> + return regmap_update_bits(priv->regmap, reg_info.reg,
> + GENMASK(1, 0) << reg_info.shift,
> + val << reg_info.shift);
> +}
> +
>
> +static bool
> +qca8k_cled_hw_control_status(struct led_classdev *ldev)
> +{
> + struct qca8k_led *led = container_of(ldev, struct qca8k_led,
> cdev);
> +
Blank line
> + struct qca8k_led_pattern_en reg_info;
> + struct qca8k_priv *priv = led->priv;
> + u32 val;
> +
> + qca8k_get_enable_led_reg(led->port_num, led->led_num,
> ®_info);
> +
> + regmap_read(priv->regmap, reg_info.reg, &val);
> +
> + val >>= reg_info.shift;
> + val &= GENMASK(1, 0);
> +
> + return val == QCA8K_LED_RULE_CONTROLLED;
> +}
> +
>
