Re: [PATCH v3 0/3] leds: add driver for SPI driven WorldSemi WS2812B RGB LEDs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi!

> > > This patch adds support for driving a chain of WS2812B LED chips
> > > using SPI bus.
> > >
> > > WorldSemi WS2812B is a individually addressable LED chip that
> > > can be chained together and controlled individually using a
> > > single wire. The chip recognize a long pulse as a bit of 1 and
> > > a short pulse as a bit of 0. Host sends a continuous stream
> > > of 24-bits color values, each LED chip takes the first 3 byte
> > > it receives as its color value and passes the leftover bytes to
> > > the next LED on the chain.
> > >
> > > This driver simulates this protocol using SPI bus by sending
> > > a long pulse as 3'b110 and a short pulse as 3'b100. The SPI
> > > frequency needs to be 2.105MHz~2.85MHz for the timing to be
> > > correct and the controller needs to transfer all the bytes
> > > continuously.
> >
> > Is this the same thing as NeoPixel? If so, that may be better-known
> > name.
> 
> NeoPixel is the name used by Adafruit for WS2812B based LED
> strips. Even though that name may be better-known, this driver
> is for the WS2812B LED chips, not for the specific Adafruit
> products made using those chips. So I think it's more appropriate
> to go with worldsemi,ws2812b instead of NeoPixel for the driver
> name.

Still, it would be suitable to mention the "NeoPixel" name in the
comment at begining of driver, and in Kconfig text.

Best regards,
							Pavel
-- 
People of Russia, stop Putin before his war on Ukraine escalates.

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux