Convert the SPI IR LED bindings to DT schema. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> --- .../bindings/leds/irled/ir-spi-led.yaml | 61 +++++++++++++++++++ .../bindings/leds/irled/spi-ir-led.txt | 29 --------- 2 files changed, 61 insertions(+), 29 deletions(-) create mode 100644 Documentation/devicetree/bindings/leds/irled/ir-spi-led.yaml delete mode 100644 Documentation/devicetree/bindings/leds/irled/spi-ir-led.txt diff --git a/Documentation/devicetree/bindings/leds/irled/ir-spi-led.yaml b/Documentation/devicetree/bindings/leds/irled/ir-spi-led.yaml new file mode 100644 index 000000000000..72cadebf6e3e --- /dev/null +++ b/Documentation/devicetree/bindings/leds/irled/ir-spi-led.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/irled/ir-spi-led.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: IR LED connected through SPI bus + +maintainers: + - Sean Young <sean@xxxxxxxx> + +description: + IR LED switch is connected to the MOSI line of the SPI device and the data + is delivered through that. + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + const: ir-spi-led + + reg: + maxItems: 1 + + duty-cycle: + $ref: /schemas/types.yaml#/definitions/uint8 + enum: [50, 60, 70, 75, 80, 90] + description: + Percentage of one period in which the signal is active. + + led-active-low: + type: boolean + description: + Output is negated with a NOT gate. + + power-supply: true + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + irled@0 { + compatible = "ir-spi-led"; + reg = <0x0>; + + duty-cycle = /bits/ 8 <60>; + led-active-low; + power-supply = <&irda_regulator>; + spi-max-frequency = <5000000>; + }; + }; + diff --git a/Documentation/devicetree/bindings/leds/irled/spi-ir-led.txt b/Documentation/devicetree/bindings/leds/irled/spi-ir-led.txt deleted file mode 100644 index 83ff1b4d70a6..000000000000 --- a/Documentation/devicetree/bindings/leds/irled/spi-ir-led.txt +++ /dev/null @@ -1,29 +0,0 @@ -Device tree bindings for IR LED connected through SPI bus which is used as -remote controller. - -The IR LED switch is connected to the MOSI line of the SPI device and the data -are delivered thourgh that. - -Required properties: - - compatible: should be "ir-spi-led". - -Optional properties: - - duty-cycle: 8 bit value that represents the percentage of one period - in which the signal is active. It can be 50, 60, 70, 75, 80 or 90. - - led-active-low: boolean value that specifies whether the output is - negated with a NOT gate. - - power-supply: specifies the power source. It can either be a regulator - or a gpio which enables a regulator, i.e. a regulator-fixed as - described in - Documentation/devicetree/bindings/regulator/fixed-regulator.yaml - -Example: - - irled@0 { - compatible = "ir-spi-led"; - reg = <0x0>; - spi-max-frequency = <5000000>; - power-supply = <&vdd_led>; - led-active-low; - duty-cycle = /bits/ 8 <60>; - }; -- 2.34.1
