On 02/12/2022 04:42, Chuanhong Guo wrote: > This patch adds dt binding schema for WorldSemi WS2812B driven using SPI > bus. Do not use "This commit/patch". https://elixir.bootlin.com/linux/v5.17.1/source/Documentation/process/submitting-patches.rst#L95 > > Signed-off-by: Chuanhong Guo <gch981213@xxxxxxxxx> > --- > Changes since v1: > remove linux driver reference from description > remove some obvious descriptions > fix unit address regex in multi-led property > drop various minItems > add maxItems = 1 to reg > fix node names and property orders in binding example > drop -spi from compatible string > add default-brightness > > .../bindings/leds/worldsemi,ws2812b.yaml | 138 ++++++++++++++++++ > 1 file changed, 138 insertions(+) > create mode 100644 Documentation/devicetree/bindings/leds/worldsemi,ws2812b.yaml > > diff --git a/Documentation/devicetree/bindings/leds/worldsemi,ws2812b.yaml b/Documentation/devicetree/bindings/leds/worldsemi,ws2812b.yaml > new file mode 100644 > index 000000000000..f91908d0acef > --- /dev/null > +++ b/Documentation/devicetree/bindings/leds/worldsemi,ws2812b.yaml > @@ -0,0 +1,138 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/leds/worldsemi,ws2812b.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: WS2812B LEDs driven using SPI > + > +maintainers: > + - Chuanhong Guo <gch981213@xxxxxxxxx> > + > +description: | > + WorldSemi WS2812B is a individually addressable LED chip that can be chained > + together and controlled individually using a single wire. > + This binding describes a chain of WS2812B LEDs connected to the SPI MOSI pin. > + Typical setups includes connecting the data pin of the LED chain to MOSI as > + the only device or using CS and MOSI with a tri-state voltage-level shifter > + for the data pin. > + The SPI frequency needs to be 2.105MHz~2.85MHz for the timing to be correct > + and the controller needs to send all the bytes continuously. > + > +allOf: > + - $ref: /schemas/spi/spi-peripheral-props.yaml# > + > +properties: > + compatible: > + const: worldsemi,ws2812b > + > + reg: > + maxItems: 1 > + > + spi-max-frequency: > + minimum: 2105000 > + maximum: 2850000 > + > + "#address-cells": > + const: 1 > + > + "#size-cells": > + const: 0 > + > +patternProperties: > + "^multi-led@[0-9a-f]+$": > + type: object > + $ref: leds-class-multicolor.yaml# > + unevaluatedProperties: false > + > + properties: > + color-index: > + description: | > + A 3-item array specifying color of each components in this LED. It > + should be one of the LED_COLOR_ID_* prefixed definitions from the > + header include/dt-bindings/leds/common.h. Defaults to > + <LED_COLOR_ID_GREEN LED_COLOR_ID_RED LED_COLOR_ID_BLUE> > + if unspecified. > + $ref: /schemas/types.yaml#/definitions/uint32-array > + maxItems: 3 > + > + default-brightness: > + description: > + The default brightness that should be applied to the LED by the operating > + system on start-up. The brightness should not exceed the brightness the > + LED can provide. > + $ref: /schemas/types.yaml#/definitions/uint32 > + minimum: 0 > + maximum: 255 > + default: 0 > + > + default-intensity: > + description: | > + An array of 3 integer specifying the default intensity of each color > + components in this LED. <255 255 255> if unspecified. > + $ref: /schemas/types.yaml#/definitions/uint32-array I am still not convinced these two properties are correct. Why this LED is special and defines default brightness and intensity and other LEDs do not? You explained you are doing it for user-space which is usually not a valid reason for changes specific to one binding. Either all bindings should support it or none. > + maxItems: 3 > + items: > + minimum: 0 > + maximum: 255 > + > + reg: > + description: | > + Which LED this node represents. The reg of the first LED on the chain > + is 0. > + maxItems: 1 > + > + required: > + - reg > + - color > + - function > + > +required: > + - compatible > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/leds/common.h> > + spi { > + #address-cells = <1>; > + #size-cells = <0>; > + > + leds@0 { git grep leds@ -- Documentation/devicetree/ | wc -l 1 git grep led@ -- Documentation/devicetree/ | wc -l 165 so rather not the first one ("leds"). There is also: git grep led-controller@ -- Documentation/devicetree/ | wc -l 30 > + compatible = "worldsemi,ws2812b"; > + reg = <0>; > + #address-cells = <1>; > + #size-cells = <0>; > + spi-max-frequency = <2850000>; > + multi-led@0 { > + reg = <0>; Best regards, Krzysztof
