.get_state() can return an error indication. Make use of it to propagate
failing hardware accesses.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
---
drivers/leds/rgb/leds-qcom-lpg.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/leds/rgb/leds-qcom-lpg.c b/drivers/leds/rgb/leds-qcom-lpg.c
index 741cc2fd817d..0dcc046a9a19 100644
--- a/drivers/leds/rgb/leds-qcom-lpg.c
+++ b/drivers/leds/rgb/leds-qcom-lpg.c
@@ -982,20 +982,20 @@ static int lpg_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
ret = regmap_read(lpg->map, chan->base + LPG_SIZE_CLK_REG, &val);
if (ret)
- return 0;
+ return ret;
refclk = lpg_clk_rates[val & PWM_CLK_SELECT_MASK];
if (refclk) {
ret = regmap_read(lpg->map, chan->base + LPG_PREDIV_CLK_REG, &val);
if (ret)
- return 0;
+ return ret;
pre_div = lpg_pre_divs[FIELD_GET(PWM_FREQ_PRE_DIV_MASK, val)];
m = FIELD_GET(PWM_FREQ_EXP_MASK, val);
ret = regmap_bulk_read(lpg->map, chan->base + PWM_VALUE_REG, &pwm_value, sizeof(pwm_value));
if (ret)
- return 0;
+ return ret;
state->period = DIV_ROUND_UP_ULL((u64)NSEC_PER_SEC * LPG_RESOLUTION * pre_div * (1 << m), refclk);
state->duty_cycle = DIV_ROUND_UP_ULL((u64)NSEC_PER_SEC * pwm_value * pre_div * (1 << m), refclk);
@@ -1006,7 +1006,7 @@ static int lpg_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
ret = regmap_read(lpg->map, chan->base + PWM_ENABLE_CONTROL_REG, &val);
if (ret)
- return 0;
+ return ret;
state->enabled = FIELD_GET(LPG_ENABLE_CONTROL_OUTPUT, val);
state->polarity = PWM_POLARITY_NORMAL;
--
2.38.1
