The current setting lives in bits 4:2 (as also defined by the mask) but
the current limit defines in the driver use bits 2:0 which should be
shifted over so they don't get masked out completely (except for 17.5mA
which became 10mA).
Now checking /sys/kernel/debug/regmap/1-0068/registers shows that the
current limit is applied correctly and doesn't take the default b000 =
42mA.
Fixes: fa877cf1abb9 ("leds: is31fl319x: Add support for is31fl319{0,1,3} chips")
Signed-off-by: Luca Weiss <luca@xxxxxxxxx>
---
Cross-checked with SN3193 datasheet I found online and downstream
driver, but please double check also against any info you have.
The SN3193 is used on msm8974pro-oneplus-bacon and I will send a patch
in the future to add it to the dts.
drivers/leds/leds-is31fl319x.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/leds/leds-is31fl319x.c b/drivers/leds/leds-is31fl319x.c
index 52b59b62f437..b2f4c4ec7c56 100644
--- a/drivers/leds/leds-is31fl319x.c
+++ b/drivers/leds/leds-is31fl319x.c
@@ -38,6 +38,7 @@
#define IS31FL3190_CURRENT_uA_MIN 5000
#define IS31FL3190_CURRENT_uA_DEFAULT 42000
#define IS31FL3190_CURRENT_uA_MAX 42000
+#define IS31FL3190_CURRENT_SHIFT 2
#define IS31FL3190_CURRENT_MASK GENMASK(4, 2)
#define IS31FL3190_CURRENT_5_mA 0x02
#define IS31FL3190_CURRENT_10_mA 0x01
@@ -553,7 +554,7 @@ static int is31fl319x_probe(struct i2c_client *client)
is31fl3196_db_to_gain(is31->audio_gain_db));
else
regmap_update_bits(is31->regmap, IS31FL3190_CURRENT, IS31FL3190_CURRENT_MASK,
- is31fl3190_microamp_to_cs(dev, aggregated_led_microamp));
+ is31fl3190_microamp_to_cs(dev, aggregated_led_microamp) << IS31FL3190_CURRENT_SHIFT);
for (i = 0; i < is31->cdef->num_leds; i++) {
struct is31fl319x_led *led = &is31->leds[i];
--
2.38.1
