On Wed, 09 Nov 2022 15:46:06 +0100, Geert Uytterhoeven wrote: > Add the missing trigger patterns for Bluetooth and WLAN activity, which > are already in active use. > > While at it, move the mmc pattern comment where it belongs, and restore > alphabetical sort order. > > Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx> > --- > arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2.dtb: leds: bt_active_led:linux,default-trigger: 'oneOf' conditional failed, one must be fixed: > 'hci0-power' is not one of ['backlight', 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer', 'pattern'] > 'hci0-power' does not match '^mmc[0-9]+$' > From schema: Documentation/devicetree/bindings/leds/leds-gpio.yaml > arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2.dtb: leds: wlan_active_led:linux,default-trigger: 'oneOf' conditional failed, one must be fixed: > 'phy0tx' is not one of ['backlight', 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer', 'pattern'] > 'phy0tx' does not match '^mmc[0-9]+$' > From schema: Documentation/devicetree/bindings/leds/leds-gpio.yaml > --- > Documentation/devicetree/bindings/leds/common.yaml | 8 ++++++-- > 1 file changed, 6 insertions(+), 2 deletions(-) > Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
