Re: [PATCH v6 2/7] gpio-f7188x: add a prefix to macros to keep gpio namespace clean

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Aug 25, 2022 at 12:44:17PM +0200, Henning Schild wrote:
> Subsequent patches will touch that file, apply some nice to have style
> changes before actually adding functional changes.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>

> Signed-off-by: Henning Schild <henning.schild@xxxxxxxxxxx>
> ---
>  drivers/gpio/gpio-f7188x.c | 36 ++++++++++++++++++------------------
>  1 file changed, 18 insertions(+), 18 deletions(-)
> 
> diff --git a/drivers/gpio/gpio-f7188x.c b/drivers/gpio/gpio-f7188x.c
> index fef539bbc03a..878458249833 100644
> --- a/drivers/gpio/gpio-f7188x.c
> +++ b/drivers/gpio/gpio-f7188x.c
> @@ -165,11 +165,11 @@ static int f7188x_gpio_set_config(struct gpio_chip *chip, unsigned offset,
>  		.regbase = _regbase,					\
>  	}
>  
> -#define gpio_dir(base) (base + 0)
> -#define gpio_data_out(base) (base + 1)
> -#define gpio_data_in(base) (base + 2)
> +#define f7188x_gpio_dir(base) ((base) + 0)
> +#define f7188x_gpio_data_out(base) ((base) + 1)
> +#define f7188x_gpio_data_in(base) ((base) + 2)
>  /* Output mode register (0:open drain 1:push-pull). */
> -#define gpio_out_mode(base) (base + 3)
> +#define f7188x_gpio_out_mode(base) ((base) + 3)
>  
>  static struct f7188x_gpio_bank f71869_gpio_bank[] = {
>  	F7188X_GPIO_BANK(0, 6, 0xF0),
> @@ -267,7 +267,7 @@ static int f7188x_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
>  		return err;
>  	superio_select(sio->addr, SIO_LD_GPIO);
>  
> -	dir = superio_inb(sio->addr, gpio_dir(bank->regbase));
> +	dir = superio_inb(sio->addr, f7188x_gpio_dir(bank->regbase));
>  
>  	superio_exit(sio->addr);
>  
> @@ -289,9 +289,9 @@ static int f7188x_gpio_direction_in(struct gpio_chip *chip, unsigned offset)
>  		return err;
>  	superio_select(sio->addr, SIO_LD_GPIO);
>  
> -	dir = superio_inb(sio->addr, gpio_dir(bank->regbase));
> +	dir = superio_inb(sio->addr, f7188x_gpio_dir(bank->regbase));
>  	dir &= ~BIT(offset);
> -	superio_outb(sio->addr, gpio_dir(bank->regbase), dir);
> +	superio_outb(sio->addr, f7188x_gpio_dir(bank->regbase), dir);
>  
>  	superio_exit(sio->addr);
>  
> @@ -310,12 +310,12 @@ static int f7188x_gpio_get(struct gpio_chip *chip, unsigned offset)
>  		return err;
>  	superio_select(sio->addr, SIO_LD_GPIO);
>  
> -	dir = superio_inb(sio->addr, gpio_dir(bank->regbase));
> +	dir = superio_inb(sio->addr, f7188x_gpio_dir(bank->regbase));
>  	dir = !!(dir & BIT(offset));
>  	if (dir)
> -		data = superio_inb(sio->addr, gpio_data_out(bank->regbase));
> +		data = superio_inb(sio->addr, f7188x_gpio_data_out(bank->regbase));
>  	else
> -		data = superio_inb(sio->addr, gpio_data_in(bank->regbase));
> +		data = superio_inb(sio->addr, f7188x_gpio_data_in(bank->regbase));
>  
>  	superio_exit(sio->addr);
>  
> @@ -335,16 +335,16 @@ static int f7188x_gpio_direction_out(struct gpio_chip *chip,
>  		return err;
>  	superio_select(sio->addr, SIO_LD_GPIO);
>  
> -	data_out = superio_inb(sio->addr, gpio_data_out(bank->regbase));
> +	data_out = superio_inb(sio->addr, f7188x_gpio_data_out(bank->regbase));
>  	if (value)
>  		data_out |= BIT(offset);
>  	else
>  		data_out &= ~BIT(offset);
> -	superio_outb(sio->addr, gpio_data_out(bank->regbase), data_out);
> +	superio_outb(sio->addr, f7188x_gpio_data_out(bank->regbase), data_out);
>  
> -	dir = superio_inb(sio->addr, gpio_dir(bank->regbase));
> +	dir = superio_inb(sio->addr, f7188x_gpio_dir(bank->regbase));
>  	dir |= BIT(offset);
> -	superio_outb(sio->addr, gpio_dir(bank->regbase), dir);
> +	superio_outb(sio->addr, f7188x_gpio_dir(bank->regbase), dir);
>  
>  	superio_exit(sio->addr);
>  
> @@ -363,12 +363,12 @@ static void f7188x_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
>  		return;
>  	superio_select(sio->addr, SIO_LD_GPIO);
>  
> -	data_out = superio_inb(sio->addr, gpio_data_out(bank->regbase));
> +	data_out = superio_inb(sio->addr, f7188x_gpio_data_out(bank->regbase));
>  	if (value)
>  		data_out |= BIT(offset);
>  	else
>  		data_out &= ~BIT(offset);
> -	superio_outb(sio->addr, gpio_data_out(bank->regbase), data_out);
> +	superio_outb(sio->addr, f7188x_gpio_data_out(bank->regbase), data_out);
>  
>  	superio_exit(sio->addr);
>  }
> @@ -391,12 +391,12 @@ static int f7188x_gpio_set_config(struct gpio_chip *chip, unsigned offset,
>  		return err;
>  	superio_select(sio->addr, SIO_LD_GPIO);
>  
> -	data = superio_inb(sio->addr, gpio_out_mode(bank->regbase));
> +	data = superio_inb(sio->addr, f7188x_gpio_out_mode(bank->regbase));
>  	if (param == PIN_CONFIG_DRIVE_OPEN_DRAIN)
>  		data &= ~BIT(offset);
>  	else
>  		data |= BIT(offset);
> -	superio_outb(sio->addr, gpio_out_mode(bank->regbase), data);
> +	superio_outb(sio->addr, f7188x_gpio_out_mode(bank->regbase), data);
>  
>  	superio_exit(sio->addr);
>  	return 0;
> -- 
> 2.35.1
> 

-- 
With Best Regards,
Andy Shevchenko





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux