On 19/08/2022 11:08, Pavel Machek wrote: > Hi! > >>> Although the question is - where is the user of it? >> >> I was planning to send updated powerpc DTS files with these >> register-bit-led definitions after accepting dt bindings. > > We need device tree people to ack them, first. But a note saying "this > is for Turris Omnia router" would be welcome. In general the process is one of: 1. Send DT bindings with driver and DTS changes, 2. Send DT bindings with driver in one patchset, DTS in second but you mention the dependency. You should not wait with DTS till bindings got accepted. Why? Because for example we do not want bindings for stuff which never is going to be upstreamed (with several exceptions, e.g. for other systems). Also because we want to be able to compare bindings with your DTS implementing them, so we are sure you described everything (especially that you said running one command to install dtchema and second command to make the check is not possible in your system). Without DTS here how can anyone be sure your DTS actually follows the bindings? Best regards, Krzysztof
