[PATCH v3 3/4] arm64: dts: qcom: pm660l: Add LPG node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The Light Pulse Generator describes a hardware block responsible for
displaying colors and patterns on an RGB LED (usually used for [battery]
status and notifications), and drive PWM signals for general-purpose
(ie. backlight) LEDs.  The availability and usage of the individual
channels differ per board and is hence left for individual platform DTs
to configure.

Signed-off-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/pm660l.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/pm660l.dtsi b/arch/arm64/boot/dts/qcom/pm660l.dtsi
index cfef42353611..636b8d398d96 100644
--- a/arch/arm64/boot/dts/qcom/pm660l.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm660l.dtsi
@@ -65,6 +65,15 @@ pmic@3 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pm660l_lpg: lpg@b100 {
+			compatible = "qcom,pm660l-lpg";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
 		pm660l_wled: leds@d800 {
 			compatible = "qcom,pm660l-wled";
 			reg = <0xd800 0xd900>;
-- 
2.36.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux