[PATCH v2 1/4] leds: simatic-ipc-leds: convert to use P2SB accessor

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Since we have a common P2SB accessor in tree we may use it instead of
open coded variants.

Replace custom code by p2sb_bar() call.

Signed-off-by: Henning Schild <henning.schild@xxxxxxxxxxx>
---
 drivers/leds/simple/Kconfig            |  1 +
 drivers/leds/simple/simatic-ipc-leds.c | 14 +++++++-------
 2 files changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/leds/simple/Kconfig b/drivers/leds/simple/Kconfig
index 9f6a68336659..9293e6b36c75 100644
--- a/drivers/leds/simple/Kconfig
+++ b/drivers/leds/simple/Kconfig
@@ -3,6 +3,7 @@ config LEDS_SIEMENS_SIMATIC_IPC
 	tristate "LED driver for Siemens Simatic IPCs"
 	depends on LEDS_CLASS
 	depends on SIEMENS_SIMATIC_IPC
+	select P2SB if X86
 	help
 	  This option enables support for the LEDs of several Industrial PCs
 	  from Siemens.
diff --git a/drivers/leds/simple/simatic-ipc-leds.c b/drivers/leds/simple/simatic-ipc-leds.c
index 078d43f5ba38..2e7597c143d8 100644
--- a/drivers/leds/simple/simatic-ipc-leds.c
+++ b/drivers/leds/simple/simatic-ipc-leds.c
@@ -15,6 +15,7 @@
 #include <linux/leds.h>
 #include <linux/module.h>
 #include <linux/pci.h>
+#include <linux/platform_data/x86/p2sb.h>
 #include <linux/platform_data/x86/simatic-ipc-base.h>
 #include <linux/platform_device.h>
 #include <linux/sizes.h>
@@ -38,8 +39,8 @@ static struct simatic_ipc_led simatic_ipc_leds_io[] = {
 	{ }
 };
 
-/* the actual start will be discovered with PCI, 0 is a placeholder */
-static struct resource simatic_ipc_led_mem_res = DEFINE_RES_MEM_NAMED(0, SZ_4K, KBUILD_MODNAME);
+/* the actual start will be discovered with p2sb, 0 is a placeholder */
+static struct resource simatic_ipc_led_mem_res = DEFINE_RES_MEM_NAMED(0, 0, KBUILD_MODNAME);
 
 static void __iomem *simatic_ipc_led_memory;
 
@@ -145,14 +146,13 @@ static int simatic_ipc_leds_probe(struct platform_device *pdev)
 		ipcled = simatic_ipc_leds_mem;
 		type = IORESOURCE_MEM;
 
-		/* get GPIO base from PCI */
-		res->start = simatic_ipc_get_membase0(PCI_DEVFN(13, 0));
-		if (res->start == 0)
-			return -ENODEV;
+		err = p2sb_bar(NULL, 0, res);
+		if (err)
+			return err;
 
 		/* do the final address calculation */
 		res->start = res->start + (0xC5 << 16);
-		res->end += res->start;
+		res->end = res->start + SZ_4K - 1;
 
 		simatic_ipc_led_memory = devm_ioremap_resource(dev, res);
 		if (IS_ERR(simatic_ipc_led_memory))
-- 
2.35.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux