Am Wed, 4 May 2022 17:19:51 +0200 schrieb Henning Schild <henning.schild@xxxxxxxxxxx>: > Am Wed, 4 May 2022 15:51:01 +0300 > schrieb Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>: > > > On Tue, Mar 08, 2022 at 08:35:20PM +0100, Henning Schild wrote: > > > This switches the simatic-ipc modules to using the p2sb interface > > > introduced by Andy with "platform/x86: introduce p2sb_bar() > > > helper". > > > > > > It also switches to one apollo lake device to using gpio leds. > > > > > > I am kind of hoping Andy will take this on top and propose it in > > > his series. > > > > First of all, they are not applicable to my current version [1] of > > the series (it maybe something changed in the Simatic drivers > > upstream, because I have got conflicts there. For the record, I'm > > using Linux Next as a base. > > That is possible, some sparse findings have been fixed lately. > > > Second question is could it be possible to split first patch into > > three, or it has to be in one? > > I assume one for leds one for wdt and finally drop stuff from > platform, and i will go with that assumption for a next round based > on your tree directly. > Can you explain why that will be useful? While it is kind of a > separation of concerns and subsystems ... it also kind of all belongs > together and needs to be merged in a rather strict order. > > regards, > Henning > > > [1]: https://gitlab.com/andy-shev/next/-/tree/topic/p2sb-next > > It would be nice if you can perform another round of testing. Just got around to testing this with my patches on top. My stuff will need some more work before i can send again. Is this a rebasing branch? With efc7d77ea372 ("EDAC, pnd2: convert to use common P2SB accessor") I am seeing problems while booting ... things do work but still error messages which probably should not be there. [ 2.215715] gpio gpiochip0: (apollolake-pinctrl.0): not an immutable chip, please consider fixing it! [ 2.217506] broxton-pinctrl apollolake-pinctrl.1: Failed to attach ACPI GPIO chip [ 2.217542] gpio gpiochip1: (apollolake-pinctrl.1): not an immutable chip, please consider fixing it! [ 2.217771] i801_smbus 0000:00:1f.1: Failed to enable SMBus PCI device (-22) [ 2.217788] i801_smbus: probe of 0000:00:1f.1 failed with error -22 [ 2.221460] broxton-pinctrl apollolake-pinctrl.2: Failed to attach ACPI GPIO chip [ 2.221482] gpio gpiochip2: (apollolake-pinctrl.2): not an immutable chip, please consider fixing it! [ 2.222010] broxton-pinctrl apollolake-pinctrl.3: Failed to attach ACPI GPIO chip [ 2.222023] gpio gpiochip3: (apollolake-pinctrl.3): not an immutable chip, please consider fixing it! regards, Henning > > > Henning Schild (2): > > > simatic-ipc: convert to use common P2SB accessor > > > leds: simatic-ipc-leds-gpio: add GPIO version of Siemens driver > > > > > > drivers/leds/simple/Kconfig | 11 ++ > > > drivers/leds/simple/Makefile | 3 +- > > > drivers/leds/simple/simatic-ipc-leds-gpio.c | 108 > > > ++++++++++++++++++ drivers/leds/simple/simatic-ipc-leds.c | > > > 77 +------------ drivers/platform/x86/simatic-ipc.c | > > > 43 +------ drivers/watchdog/Kconfig | 1 + > > > drivers/watchdog/simatic-ipc-wdt.c | 15 +-- > > > .../platform_data/x86/simatic-ipc-base.h | 2 - > > > 8 files changed, 139 insertions(+), 121 deletions(-) > > > create mode 100644 drivers/leds/simple/simatic-ipc-leds-gpio.c > > > > > > -- > > > 2.34.1 > > > > > >
