Re: [PATCH v3 2/4] leds: simatic-ipc-leds: add new driver for Siemens Industial PCs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Am Tue, 30 Mar 2021 14:04:35 +0300
schrieb Andy Shevchenko <andy.shevchenko@xxxxxxxxx>:

> On Mon, Mar 29, 2021 at 8:59 PM Henning Schild
> <henning.schild@xxxxxxxxxxx> wrote:
> >
> > This driver adds initial support for several devices from Siemens.
> > It is based on a platform driver introduced in an earlier commit.  
> 
> ...
> 
> > +#define SIMATIC_IPC_LED_PORT_BASE      0x404E  
> 
> > +static struct simatic_ipc_led simatic_ipc_leds_io[] = {
> > +       {1 << 15, "green:" LED_FUNCTION_STATUS "-1" },
> > +       {1 << 7,  "yellow:" LED_FUNCTION_STATUS "-1" },
> > +       {1 << 14, "red:" LED_FUNCTION_STATUS "-2" },
> > +       {1 << 6,  "yellow:" LED_FUNCTION_STATUS "-2" },
> > +       {1 << 13, "red:" LED_FUNCTION_STATUS "-3" },
> > +       {1 << 5,  "yellow:" LED_FUNCTION_STATUS "-3" },
> > +       { }
> > +};  
> 
> > +static struct simatic_ipc_led simatic_ipc_leds_mem[] = {
> > +       {0x500 + 0x1A0, "red:" LED_FUNCTION_STATUS "-1"},
> > +       {0x500 + 0x1A8, "green:" LED_FUNCTION_STATUS "-1"},
> > +       {0x500 + 0x1C8, "red:" LED_FUNCTION_STATUS "-2"},
> > +       {0x500 + 0x1D0, "green:" LED_FUNCTION_STATUS "-2"},
> > +       {0x500 + 0x1E0, "red:" LED_FUNCTION_STATUS "-3"},
> > +       {0x500 + 0x198, "green:" LED_FUNCTION_STATUS "-3"},
> > +       { }
> > +};  
> 
> It seems to me like poking GPIO controller registers directly. This
> is not good. The question still remains: Can we simply register a
> GPIO (pin control) driver and use an LED GPIO driver with an
> additional board file that instantiates it?

The short answer for v4 will be "No we can not!". The pinctrl drivers
do not currently probe on any of the devices and attempts to fix that
have failed or gut stuck. I tried to help out where i could and waited
for a long time.

Now my take is to turn the order around. We go in like that and will
happily switch to pinctrl if that ever comes up on the machines.
Meaning P2SB series on top of this, no more delays please.
We do use request_region so have a mutex in place. Meaning we really
only touch GPIO while pinctrl does not!
I see no issue here, waited for a long time and now expect to be
allowed to get merged first.

Henning



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux