[PATCH 2/3] dt-bindings: leds: Add `excludes` property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Some RJ-45 connectors have LEDs wired in the following way:

         LED1
      +--|>|--+
      |       |
  A---+--|<|--+---B
         LED2

With + on A and - on B, LED1 is ON and LED2 is OFF. Inverting the
polarity turns LED1 OFF and LED2 ON.

So these LEDs exclude each other.

Add new `excludes` property to the LED binding. The property is a
phandle-array to all the other LEDs that are excluded by this LED.

Signed-off-by: Marek Behún <kabel@xxxxxxxxxx>
---
 Documentation/devicetree/bindings/leds/common.yaml | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml
index a19acc781e89..03759d2e125a 100644
--- a/Documentation/devicetree/bindings/leds/common.yaml
+++ b/Documentation/devicetree/bindings/leds/common.yaml
@@ -59,6 +59,14 @@ properties:
       deprecated - use 'function' and 'color' properties instead.
       function-enumerator has no effect when this property is present.
 
+  excludes:
+    description:
+      List of LEDs that are excluded by this LED: if this LED is ON, the others
+      must be OFF. This is mostly the case when there are two LEDs connected in
+      parallel, but inversely: inverting the polarity of the source turns one
+      LED ON while the other OFF. There are RJ-45 connectors with such wiring.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+
   default-state:
     description:
       The initial state of the LED. If the LED is already on or off and the
-- 
2.32.0




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux