On 9/9/21 6:36 AM, Maxime Ripard wrote: > Hi, > > On Sun, Sep 05, 2021 at 11:17:19PM -0500, Samuel Holland wrote: >> Hi, >> >> On 9/3/21 5:36 AM, Maxime Ripard wrote: >>> On Thu, Sep 02, 2021 at 06:42:28PM -0500, Samuel Holland wrote: >>>> Some Allwinner sunxi SoCs, starting with the R329, contain an LED >>>> controller designed to drive RGB LED pixels. Add a driver for it using >>>> the multicolor LED framework, and with LEDs defined in the device tree. >>>> >>>> Signed-off-by: Samuel Holland <samuel@xxxxxxxxxxxx> >>>> --- >>>> drivers/leds/Kconfig | 8 + >>>> drivers/leds/Makefile | 1 + >>>> drivers/leds/leds-sunxi.c | 562 ++++++++++++++++++++++++++++++++++++++ >>>> 3 files changed, 571 insertions(+) >>>> create mode 100644 drivers/leds/leds-sunxi.c >>>> >>>> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig >>>> index ed800f5da7d8..559d2ca0a7f4 100644 >>>> --- a/drivers/leds/Kconfig >>>> +++ b/drivers/leds/Kconfig >>>> @@ -297,6 +297,14 @@ config LEDS_SUNFIRE >>>> This option enables support for the Left, Middle, and Right >>>> LEDs on the I/O and CPU boards of SunFire UltraSPARC servers. >>>> >>>> +config LEDS_SUNXI >>>> + tristate "LED support for Allwinner sunxi LED controller" >>>> + depends on LEDS_CLASS >>>> + depends on ARCH_SUNXI || COMPILE_TEST >>>> + help >>>> + This option enables support for the LED controller provided in >>>> + some Allwinner sunxi SoCs. >>>> + >>> >>> Same comment for the name >> >> Are you concerned about the help text only, or do you also want me to rename the >> Kconfig symbol? > > The driver, the driver symbols and the Kconfig symbol would be nice > >> I am happy to change the help text to something like: "This option enables >> support for the LED controller provided in the Allwinner R329 and D1 SoCs." >> >> But I don't know of any satisfying way to rename the Kconfig symbol. There is no >> general category name for "R329 and D1." > > Yeah, this is not ideal, but the issue is that nothing is telling us > whether or not it will support *only* the R329 and D1. Chances are it's > going to be featured in a number of other SoCs in the future, so if we > were to have the entire list of supported SoCs in the Kconfig symbol and > driver name, we'd have to always change them everytime a new SoC support > is introduced. This is why I named it LEDS_SUNXI: until and unless a "v2" hardware block shows up, this is the LED controller in all sunxi SoCs [that have an LED controller at all]. And at that point, naming the new driver LEDS_SUNXI_V2 makes more sense to me than trying to guess the pattern for SoC support, where there likely is no pattern. > It would be a pain, and it's pretty much guaranteed that someone is > going to forget at some point. To mitigate this, we took the approach to > use the same semantic than the DT compatible: the driver name doesn't > really define the list of all the SoCs supported but matches every SoC > (more or less) compatible with that SoC. Ok, but this still doesn't tell me what you expect the driver to be named. Again, there is no general name for "every SoC (more or less) compatible with R329". We tried to guess the pattern around the time H6 came out, and named a bunch of things "sun50i" (like the IOMMU driver) that are now showing up on sun8i (A50) and sun20i (D1) SoCs. And it turns out most of the changes were not even new for H6 (sun50iw6), but already present in the A63 (sun50iw3). I'm in sort of the same situation here. I know the hardware exists on the R329 (sun50iw11); and from looking at the A100 (sun50iw10) pinctrl driver, I know some LED controller exists there as well. But I don't have a manual for the A100 to verify that LED controller is compatible. So I don't even know if R329 is the first supported SoC. To be clear: do you want me to name the driver "sun50i_r329_ledc"? Or maybe "sun50i_a100_ledc", since that came first and it is most likely compatible? Regards, Samuel > If you want to have the entire list in the Kconfig help though, I don't > see anything wrong with that. Even if it goes unmaintained, it wouldn't > really be a big deal. > > Maxime >