On Tue, Aug 24, 2021 at 02:44:37PM +0200, Luka Kovacic wrote: > Add the iei-wt61p803-puzzle driver hwmon driver interface documentation. > > Signed-off-by: Luka Kovacic <luka.kovacic@xxxxxxxxxx> > Signed-off-by: Pavo Banicevic <pavo.banicevic@xxxxxxxxxx> > Cc: Luka Perkov <luka.perkov@xxxxxxxxxx> > Cc: Robert Marko <robert.marko@xxxxxxxxxx> Acked-by: Guenter Roeck <linux@xxxxxxxxxxxx> > --- > .../hwmon/iei-wt61p803-puzzle-hwmon.rst | 43 +++++++++++++++++++ > Documentation/hwmon/index.rst | 1 + > 2 files changed, 44 insertions(+) > create mode 100644 Documentation/hwmon/iei-wt61p803-puzzle-hwmon.rst > > diff --git a/Documentation/hwmon/iei-wt61p803-puzzle-hwmon.rst b/Documentation/hwmon/iei-wt61p803-puzzle-hwmon.rst > new file mode 100644 > index 000000000000..bbbe97645965 > --- /dev/null > +++ b/Documentation/hwmon/iei-wt61p803-puzzle-hwmon.rst > @@ -0,0 +1,43 @@ > +.. SPDX-License-Identifier: GPL-2.0-only > + > +Kernel driver iei-wt61p803-puzzle-hwmon > +======================================= > + > +Supported chips: > + * IEI WT61P803 PUZZLE for IEI Puzzle M801 > + > + Prefix: 'iei-wt61p803-puzzle-hwmon' > + > +Author: Luka Kovacic <luka.kovacic@xxxxxxxxxx> > + > + > +Description > +----------- > + > +This driver adds fan and temperature sensor reading for some IEI Puzzle > +series boards. > + > +Sysfs attributes > +---------------- > + > +The following attributes are supported: > + > +- IEI WT61P803 PUZZLE for IEI Puzzle M801 > + > +/sys files in hwmon subsystem > +----------------------------- > + > +================= == ===================================================== > +fan[1-5]_input RO files for fan speed (in RPM) > +pwm[1-2] RW files for fan[1-2] target duty cycle (0..255) > +temp[1-2]_input RO files for temperature sensors, in millidegree Celsius > +================= == ===================================================== > + > +/sys files in thermal subsystem > +------------------------------- > + > +================= == ===================================================== > +cur_state RW file for current cooling state of the cooling device > + (0..max_state) > +max_state RO file for maximum cooling state of the cooling device > +================= == ===================================================== > diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst > index bc01601ea81a..4a050a5bc1f8 100644 > --- a/Documentation/hwmon/index.rst > +++ b/Documentation/hwmon/index.rst > @@ -73,6 +73,7 @@ Hardware Monitoring Kernel Drivers > ibmaem > ibm-cffps > ibmpowernv > + iei-wt61p803-puzzle-hwmon > ina209 > ina2xx > ina3221 > -- > 2.31.1 >
