Hi Heiner,
On 8/14/21 8:33 PM, Heiner Kallweit wrote:
On 14.08.2021 20:11, David Bauer wrote:
Add binding documentation for the Realtek RTL8152 / RTL8153 USB ethernet
adapters.
Signed-off-by: David Bauer <mail@xxxxxxxxxxxxxxx>
---
.../bindings/net/realtek,rtl8152.yaml | 43 +++++++++++++++++++
1 file changed, 43 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/realtek,rtl8152.yaml
diff --git a/Documentation/devicetree/bindings/net/realtek,rtl8152.yaml b/Documentation/devicetree/bindings/net/realtek,rtl8152.yaml
new file mode 100644
index 000000000000..ab760000b3a6
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/realtek,rtl8152.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/realtek,rtl8152.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek RTL8152/RTL8153 series USB ethernet
+
+maintainers:
+ - David Bauer <mail@xxxxxxxxxxxxxxx>
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - realtek,rtl8152
+ - realtek,rtl8153
+
+ reg:
+ description: The device number on the USB bus
+
+ realtek,led-data:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Value to be written to the LED configuration register.
+
+Pavel as LED subsystem maintainer
There's an ongoing discussion (with certain decisions taken already) about
how to configure network device LEDs.
Thanks, I didn't knew about this.
Is there any place where i can read up specifics about
this topic?
Best
David
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ usb@100 {
+ reg = <0x100 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb-eth@2 {
+ compatible = "realtek,rtl8153";
+ reg = <0x2>;
+ realtek,led-data = <0x87>;
+ };
+ };
