Remove unnecessary Kconfig symbol LEDS_BLINK
Improve Kconfig help text to make it more useful.
Signed-off-by: Rahul Tanwar <rtanwar@xxxxxxxxxxxxx>
---
drivers/leds/Kconfig | 5 ++---
drivers/leds/Makefile | 2 +-
drivers/leds/blink/Kconfig | 28 +++++++++++++---------------
drivers/leds/blink/Makefile | 2 +-
drivers/leds/blink/leds-lgm-sso.c | 4 ++--
5 files changed, 19 insertions(+), 22 deletions(-)
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index b6742b4231bf..4ca8cd594518 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -928,13 +928,12 @@ config LEDS_ACER_A500
This option enables support for the Power Button LED of
Acer Iconia Tab A500.
+source "drivers/leds/blink/Kconfig"
+
comment "Flash and Torch LED drivers"
source "drivers/leds/flash/Kconfig"
comment "LED Triggers"
source "drivers/leds/trigger/Kconfig"
-comment "LED Blink"
-source "drivers/leds/blink/Kconfig"
-
endif # NEW_LEDS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 2a698df9da57..7e604d3028c8 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -110,4 +110,4 @@ obj-$(CONFIG_LEDS_CLASS_FLASH) += flash/
obj-$(CONFIG_LEDS_TRIGGERS) += trigger/
# LED Blink
-obj-$(CONFIG_LEDS_BLINK) += blink/
+obj-y += blink/
diff --git a/drivers/leds/blink/Kconfig b/drivers/leds/blink/Kconfig
index 6dedc58c47b3..2de2973fbc6b 100644
--- a/drivers/leds/blink/Kconfig
+++ b/drivers/leds/blink/Kconfig
@@ -1,21 +1,19 @@
-menuconfig LEDS_BLINK
- bool "LED Blink support"
- depends on LEDS_CLASS
- help
- This option enables blink support for the leds class.
- If unsure, say Y.
-
-if LEDS_BLINK
-
-config LEDS_BLINK_LGM
- tristate "LED support for Intel LGM SoC series"
+config LEDS_LGM
+ tristate "LED support for LGM SoC series"
depends on GPIOLIB
depends on LEDS_CLASS
depends on MFD_SYSCON
depends on OF
help
- Parallel to serial conversion, which is also called SSO
controller,
- can drive external shift register for LED outputs.
- This enables LED support for Serial Shift Output controller(SSO).
+ This option enables support for LEDs connected to GPIO lines on
+ Lightning Mountain(LGM) SoC. These LEDs are driven by a Serial
+ Shift Output(SSO) controller. The driver supports hardware
+ blinking with a configurable LED update/blink frequency in two
+ modes, 2/4/8/10 Hz in low speed mode and 50/100/200/250 KHz in
+ high speed mode. The LEDs can be configured to be triggered by
+ SW/CPU or by hardware. Say 'Y' here if you are working on LGM
+ SoC based platform.
+
+ To compile this driver as a module, choose M here: the
+ module will be called leds-lgm-sso.
-endif # LEDS_BLINK
diff --git a/drivers/leds/blink/Makefile b/drivers/leds/blink/Makefile
index 2fa6c7b7b67e..fa5d04dccf13 100644
--- a/drivers/leds/blink/Makefile
+++ b/drivers/leds/blink/Makefile
@@ -1,2 +1,2 @@
# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_LEDS_BLINK_LGM) += leds-lgm-sso.o
+obj-$(CONFIG_LEDS_LGM) += leds-lgm-sso.o
diff --git a/drivers/leds/blink/leds-lgm-sso.c
b/drivers/leds/blink/leds-lgm-sso.c
index 7d5c9ca007d6..e41143a87e20 100644
--- a/drivers/leds/blink/leds-lgm-sso.c
+++ b/drivers/leds/blink/leds-lgm-sso.c
@@ -1,8 +1,8 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Intel Lightning Mountain SoC LED Serial Shift Output Controller driver
+ * Lightning Mountain SoC LED Serial Shift Output Controller driver
*
- * Copyright (c) 2020 Intel Corporation.
+ * Copyright (c) 2021 MaxLinear, Inc.
*/
#include <linux/bitfield.h>
--
2.17.1
