Am Fri, 5 Mar 2021 17:42:42 +0200
schrieb Andy Shevchenko <andy.shevchenko@xxxxxxxxx>:
> On Thu, Mar 4, 2021 at 3:47 PM Hans de Goede <hdegoede@xxxxxxxxxx>
> wrote:
> > On 3/4/21 11:11 AM, Andy Shevchenko wrote:
> > > On Thu, Mar 4, 2021 at 8:36 AM Henning Schild
> > > <henning.schild@xxxxxxxxxxx> wrote:
>
> ...
>
> > >> +u32 simatic_ipc_get_membase0(unsigned int p2sb)
> > >> +{
> > >> + u32 bar0 = 0;
> > >
> > >> +#ifdef CONFIG_PCI
> > >
> > > It's ugly besides the fact that you have a dependency.
> > >
> > >> + struct pci_bus *bus;
> > >
> > > Missed blank line.
> > >
> > >> + /*
> > >> + * The GPIO memory is bar0 of the hidden P2SB device.
> > >> Unhide the device
> > >> + * to have a quick look at it, before we hide it again.
> > >> + * Also grab the pci rescan lock so that device does not
> > >> get discovered
> > >> + * and remapped while it is visible.
> > >> + * This code is inspired by drivers/mfd/lpc_ich.c
> > >> + */
> > >> + bus = pci_find_bus(0, 0);
> > >> + pci_lock_rescan_remove();
> > >> + pci_bus_write_config_byte(bus, p2sb, 0xE1, 0x0);
> > >> + pci_bus_read_config_dword(bus, p2sb, PCI_BASE_ADDRESS_0,
> > >> &bar0); +
> > >> + bar0 &= ~0xf;
> > >> + pci_bus_write_config_byte(bus, p2sb, 0xE1, 0x1);
> > >> + pci_unlock_rescan_remove();
> > >> +#endif /* CONFIG_PCI */
> > >> + return bar0;
> > >> +}
> > >> +EXPORT_SYMBOL(simatic_ipc_get_membase0);
> > >
> > > Oy vey! I know what this is and let's do it differently. I have
> > > some (relatively old) patch series I can send you privately for
> > > testing.
> >
> > This bit stood out the most to me too, it would be good if we can
> > this fixed in some cleaner work. So I'm curious how things will
> > look with Andy's work integrated.
> >
> > Also I don't think this should be exported. Instead this (or its
> > replacement) should be used to get the address for an IOMEM
> > resource to add the platform devices when they are instantiated.
> > Then the platform-dev drivers can just use the regular functions to
> > get their resources instead of relying on this module.
>
> I have published a WIP branch [1]. I have no means to test (I don't
> know what hardware at hand I can use right now), but I made it compile
> after 4 years of gathering dust...
> Feel free to give any kind of comments or share your ideas on how it
> can be improved (the above idea on IOMEM resource is interesting, but
> devices are PCI, not sure how this can be done).
>
> [1]: https://gitlab.com/andy-shev/next/-/tree/p2sb
That is a little weird, might be a good idea to RFC reply to the cover
letter of this one. To allow review and discussion in a central place.
Henning
