[PATCH V4 1/2] backlight: qcom-wled: Fix FSC update issue for WLED5

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Currently, for WLED5, the FSC (Full scale current) setting is not
updated properly due to driver toggling the wrong register after
an FSC update.

On WLED5 we should only toggle the MOD_SYNC bit after a brightness
update. For an FSC update we need to toggle the SYNC bits instead.

Fix it by adopting the common wled3_sync_toggle() for WLED5 and
introducing new code to the brightness update path to compensate.

Signed-off-by: Kiran Gunda <kgunda@xxxxxxxxxxxxxx>
Reviewed-by: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
---
 drivers/video/backlight/qcom-wled.c | 25 +++++++++++++++++++------
 1 file changed, 19 insertions(+), 6 deletions(-)

diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c
index 3bc7800..aef52b9 100644
--- a/drivers/video/backlight/qcom-wled.c
+++ b/drivers/video/backlight/qcom-wled.c
@@ -348,7 +348,7 @@ static int wled3_sync_toggle(struct wled *wled)
 	return rc;
 }
 
-static int wled5_sync_toggle(struct wled *wled)
+static int wled5_mod_sync_toggle(struct wled *wled)
 {
 	int rc;
 	u8 val;
@@ -445,10 +445,23 @@ static int wled_update_status(struct backlight_device *bl)
 			goto unlock_mutex;
 		}
 
-		rc = wled->wled_sync_toggle(wled);
-		if (rc < 0) {
-			dev_err(wled->dev, "wled sync failed rc:%d\n", rc);
-			goto unlock_mutex;
+		if (wled->version < 5) {
+			rc = wled->wled_sync_toggle(wled);
+			if (rc < 0) {
+				dev_err(wled->dev, "wled sync failed rc:%d\n", rc);
+				goto unlock_mutex;
+			}
+		} else {
+			/*
+			 * For WLED5 toggling the MOD_SYNC_BIT updates the
+			 * brightness
+			 */
+			rc = wled5_mod_sync_toggle(wled);
+			if (rc < 0) {
+				dev_err(wled->dev, "wled mod sync failed rc:%d\n",
+					rc);
+				goto unlock_mutex;
+			}
 		}
 	}
 
@@ -1459,7 +1472,7 @@ static int wled_configure(struct wled *wled)
 		size = ARRAY_SIZE(wled5_opts);
 		*cfg = wled5_config_defaults;
 		wled->wled_set_brightness = wled5_set_brightness;
-		wled->wled_sync_toggle = wled5_sync_toggle;
+		wled->wled_sync_toggle = wled3_sync_toggle;
 		wled->wled_cabc_config = wled5_cabc_config;
 		wled->wled_ovp_delay = wled5_ovp_delay;
 		wled->wled_auto_detection_required =
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
 a Linux Foundation Collaborative Project




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux