The mute and mic-mute LEDs should be automatically turned on/off based on the audio-cards mixer settings. Add the standardized default-trigger names for this, so that the alsa code can turn the LEDs on/off as appropriate (on supported audio cards). This brings the mute/mic-mute LED support inline with the thinkpad_acpi support for the same LEDs in keyboards directly connected to the laptop's embedded-controller. Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> --- drivers/hid/hid-lenovo.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/hid/hid-lenovo.c b/drivers/hid/hid-lenovo.c index 041bfa1937a8..18e9ffcf2ace 100644 --- a/drivers/hid/hid-lenovo.c +++ b/drivers/hid/hid-lenovo.c @@ -818,6 +818,7 @@ static int lenovo_register_leds(struct hid_device *hdev) snprintf(name_micm, name_sz, "%s:amber:micmute", dev_name(&hdev->dev)); data->led_mute.name = name_mute; + data->led_mute.default_trigger = "audio-mute"; data->led_mute.brightness_set_blocking = lenovo_led_brightness_set; data->led_mute.max_brightness = LED_ON; data->led_mute.flags = LED_HW_PLUGGABLE; @@ -827,6 +828,7 @@ static int lenovo_register_leds(struct hid_device *hdev) return ret; data->led_micmute.name = name_micm; + data->led_micmute.default_trigger = "audio-micmute"; data->led_micmute.brightness_set_blocking = lenovo_led_brightness_set; data->led_micmute.max_brightness = LED_ON; data->led_micmute.flags = LED_HW_PLUGGABLE; -- 2.30.1
