AW: [PATCH v2 1/4] leds: lp50xx: add setting of default intensity from DT

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Pavel, hello Dan,

> > diff --git a/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml b/Documentation/devicetree/bindings/leds/leds-
> lp50xx.yaml
> > index c192b5feadc7..2bc25b2fc94d 100644
> > --- a/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml
> > +++ b/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml
> > @@ -65,6 +65,11 @@ patternProperties:
> >            This property denotes the LED module number(s) that is used on the
> >            for the child node.  The LED modules can either be used stand alone
> >            or grouped into a module bank.
> > +      default-intensity:
> > +        minItems: 1
> > +        maxItems: 3
> > +        description:
> 
> Do we need more than three for RGBW and similar?

AFAIK the lp50xx supports only RGB. So I would go for that.


> >      patternProperties:
> >        "(^led-[0-9a-f]$|led)":
> > @@ -99,6 +104,7 @@ examples:
> >                 reg = <0x1>;
> >                 color = <LED_COLOR_ID_RGB>;
> >                 function = LED_FUNCTION_CHARGING;
> > +               default-intensity = <100 0 0>;
> >
> >                 led-0 {
> >                     color = <LED_COLOR_ID_RED>;
> 
> Should this go to leds-class-multicolor.yaml ? 

I think then all drivers should support it,  but I cannot change all drivers. 
So I would only leave it in there.


> Can you make example
> <255 120 0> or something like that, so make it clear it is not
> percent?

Sure

Best Regards,

   Sven







[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux