Add driver for the Qualcomm SPMI Flash LEDs. These are controlled
through an SPMI bus and are part of the PM8941 PMIC. There are two LEDs
present in the chip, and can be used independently as camera flash or
together in torch mode to act as a lantern.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxxx>
---
Changes in v2:
- Thanks to Jacek:
- Implemented flash LED class framework
- Thanks to Bjorn:
- Renamed driver to "qcom spmi flash"
- Refactored code
- Added missing copyright
drivers/leds/Kconfig | 8 +
drivers/leds/Makefile | 1 +
drivers/leds/leds-qcom-spmi-flash.c | 1153 +++++++++++++++++++++++++++
3 files changed, 1162 insertions(+)
create mode 100644 drivers/leds/leds-qcom-spmi-flash.c
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 849d3c5f908e..ad1c7846f9b3 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -928,6 +928,14 @@ config LEDS_ACER_A500
This option enables support for the Power Button LED of
Acer Iconia Tab A500.
+config LEDS_QCOM_SPMI_FLASH
+ tristate "Support for QCOM SPMI Flash LEDs"
+ depends on SPMI
+ depends on LEDS_CLASS_FLASH
+ help
+ This driver supports the Flash/Torch LED present in Qualcomm's PM8941
+ PMIC.
+
comment "LED Triggers"
source "drivers/leds/trigger/Kconfig"
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 73e603e1727e..e86bcfba016b 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -93,6 +93,7 @@ obj-$(CONFIG_LEDS_TURRIS_OMNIA) += leds-turris-omnia.o
obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o
obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o
obj-$(CONFIG_LEDS_WRAP) += leds-wrap.o
+obj-$(CONFIG_LEDS_QCOM_SPMI_FLASH) += leds-qcom-spmi-flash.o
# LED SPI Drivers
obj-$(CONFIG_LEDS_CR0014114) += leds-cr0014114.o
diff --git a/drivers/leds/leds-qcom-spmi-flash.c b/drivers/leds/leds-qcom-spmi-flash.c
new file mode 100644
index 000000000000..023fc107abce
--- /dev/null
+++ b/drivers/leds/leds-qcom-spmi-flash.c
@@ -0,0 +1,1153 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Qualcomm SPMI Flash Driver
+ *
+ * Copyright (c) 2020, Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxxx>
+ *
+ * Based on QPNP LEDs driver from downstream MSM kernel sources.
+ * Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spmi.h>
+#include <linux/of_device.h>
+#include <linux/device.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/mutex.h>
+#include <linux/sysfs.h>
+#include <linux/led-class-flash.h>
+#include <linux/regulator/consumer.h>
+#include <linux/delay.h>
+#include <linux/regmap.h>
+#include <dt-bindings/leds/leds-qcom-spmi-flash.h>
+
+#define FLASH_SAFETY_TIMER 0x40
+#define FLASH_MAX_CURR 0x41
+#define FLASH_LED_0_CURR 0x42
+#define FLASH_LED_1_CURR 0x43
+#define FLASH_CLAMP_CURR 0x44
+#define FLASH_LED_TMR_CTRL 0x48
+#define FLASH_HEADROOM 0x4A
+#define FLASH_STARTUP_DELAY 0x4B
+#define FLASH_MASK_ENABLE 0x4C
+#define FLASH_VREG_OK_FORCE 0x4F
+#define FLASH_ENABLE_CONTROL 0x46
+#define FLASH_LED_STROBE_CTRL 0x47
+#define FLASH_LED_UNLOCK_SECURE 0xD0
+#define FLASH_LED_TORCH 0xE4
+#define FLASH_FAULT_DETECT 0x51
+#define FLASH_RAMP_RATE 0x54
+#define FLASH_PERIPHERAL_SUBTYPE 0x05
+#define FLASH_VPH_PWR_DROOP 0x5A
+
+#define FLASH_MAX_LEVEL 0x4F
+#define TORCH_MAX_LEVEL 0x0F
+#define FLASH_NO_MASK 0x00
+
+#define FLASH_MASK_1 0x20
+#define FLASH_MASK_REG_MASK 0xE0
+#define FLASH_HEADROOM_MASK 0x03
+#define FLASH_SAFETY_TIMER_MASK 0x7F
+#define FLASH_CURRENT_MASK 0xFF
+#define FLASH_MAX_CURRENT_MASK 0x7F
+#define FLASH_TMR_MASK 0x03
+#define FLASH_TMR_WATCHDOG 0x03
+#define FLASH_TMR_SAFETY 0x00
+#define FLASH_FAULT_DETECT_MASK 0X80
+#define FLASH_HW_VREG_OK 0x40
+#define FLASH_VREG_MASK 0xC0
+#define FLASH_STARTUP_DLY_MASK 0x02
+#define FLASH_RAMP_RATE_MASK 0xBF
+#define FLASH_VPH_PWR_DROOP_MASK 0xF3
+
+#define FLASH_ENABLE_ALL 0xE0
+#define FLASH_ENABLE_MODULE 0x80
+#define FLASH_ENABLE_MODULE_MASK 0x80
+#define FLASH_DISABLE_ALL 0x00
+#define FLASH_ENABLE_MASK 0xE0
+#define FLASH_ENABLE_LED_0 0xC0
+#define FLASH_ENABLE_LED_1 0xA0
+#define FLASH_INIT_MASK 0xE0
+#define FLASH_SELFCHECK_ENABLE 0x80
+#define FLASH_SELFCHECK_DISABLE 0x00
+
+#define FLASH_STROBE_SW 0xC0
+#define FLASH_STROBE_HW 0x04
+#define FLASH_STROBE_MASK 0xC7
+#define FLASH_LED_0_OUTPUT 0x80
+#define FLASH_LED_1_OUTPUT 0x40
+
+#define FLASH_TORCH_MASK 0x03
+#define FLASH_LED_TORCH_ENABLE 0x00
+#define FLASH_LED_TORCH_DISABLE 0x03
+#define FLASH_UNLOCK_SECURE 0xA5
+#define FLASH_SECURE_MASK 0xFF
+
+#define FLASH_SUBTYPE_DUAL 0x01
+#define FLASH_SUBTYPE_SINGLE 0x02
+
+#define FLASH_DURATION_STEP 10000
+#define FLASH_DURATION_MIN 10000
+#define FLASH_DURATION_MAX 1280000 //TODO: find real value
+
+#define FLASH_CURRENT_STEP 12500
+#define FLASH_CURRENT_MIN 12500
+#define FLASH_CURRENT_MAX 1000000
+#define FLASH_TORCH_CURRENT_MAX 200000
+
+#define FLASH_DEFAULT_CLAMP 200000
+
+enum qcom_flash_ids {
+ QCOM_FLASH_ID_LED0,
+ QCOM_FLASH_ID_LED1,
+};
+
+static u8 flash_debug_regs[] = {
+ 0x40, 0x41, 0x42, 0x43, 0x44, 0x48, 0x49, 0x4b, 0x4c,
+ 0x4f, 0x46, 0x47,
+};
+
+/**
+ * struct qcom_flash_led - Represents each individual flash LED
+ * @cdev: flash LED classdev
+ * @id: led ID as given by enum qcom_flash_ids
+ * @default_on: default state for the LED
+ * @turn_off_delay_ms: number of msec before turning off the LED
+ * @clamp_curr: Clamp current to use
+ * @headroom: Headroom value to use, as given by leds-qcom-spmi-flash.h
+ * @enable_module: enable address for particular flash
+ * @trigger_flash: trigger flash
+ * @startup_dly: startup delay for flash, as given by leds-qcom-spmi-flash.h
+ * @strobe_type: select between sw and hw strobe
+ * @current_addr: address to write for current
+ * @second_addr: address of secondary flash to be written
+ * @safety_timer: enable safety timer or watchdog timer
+ * @torch_enable: whether torch mode is enabled or individual flash LED
+ */
+struct qcom_flash_led {
+ struct led_classdev_flash cdev;
+ int id;
+ bool default_on;
+ int turn_off_delay_ms;
+ u32 clamp_curr;
+ u8 headroom;
+ u8 enable_module;
+ u8 trigger_flash;
+ u8 startup_dly;
+ u8 strobe_type;
+ u16 current_addr;
+ u16 second_addr;
+ bool safety_timer;
+ bool torch_enable;
+};
+
+/**
+ * struct qcom_flash_device - QCOM SPMI Flash device, contains 2 flash LEDs
+ * @regmap: regmap used to access LED registers over SPMI
+ * @base: base register given in device tree
+ * @pdev: platform device from devicetree
+ * @flash_boost_reg: voltage regulator to supply the flashes
+ * @torch_boost_reg: voltage regulator to supply torch mode
+ * @leds: flash LEDs
+ * @num_leds: number of LEDs registered (between 0 and 2)
+ * @lock: lock to protect SPMI transactions
+ * @torch_enable: enable flash LED torch mode
+ * @peripheral_subtype: module peripheral subtype
+ * @flash_regulator_on: flash regulator status
+ * @torch_regulator_on: torch regulator status
+ */
+struct qcom_flash_device {
+ struct regmap *regmap;
+ u16 base;
+ struct platform_device *pdev;
+ struct regulator *flash_boost_reg;
+ struct regulator *torch_boost_reg;
+ struct qcom_flash_led leds[2];
+ u8 num_leds;
+ struct mutex lock;
+ u8 torch_enable;
+ u8 peripheral_subtype;
+ bool flash_regulator_on;
+ bool torch_regulator_on;
+};
+
+static inline struct qcom_flash_led *flcdev_to_led(struct led_classdev_flash *fled_cdev)
+{
+ return container_of(fled_cdev, struct qcom_flash_led, cdev);
+}
+
+static inline struct qcom_flash_device *led_to_leds_dev(struct qcom_flash_led *led)
+{
+ return container_of(led, struct qcom_flash_device, leds[led->id]);
+}
+
+static int led_read_reg(struct qcom_flash_device *leds_dev, u16 offset, u8 *data)
+{
+ unsigned int val;
+ int ret;
+
+ ret = regmap_read(leds_dev->regmap, leds_dev->base + offset, &val);
+ if (ret < 0)
+ return ret;
+
+ *data = val;
+ return 0;
+}
+
+static int led_write_reg(struct qcom_flash_device *leds_dev, u16 offset, u8 data)
+{
+ return regmap_write(leds_dev->regmap, leds_dev->base + offset, data);
+}
+
+static int qcom_flash_masked_write(struct qcom_flash_device *leds_dev,
+ u16 addr,
+ u8 mask,
+ u8 val)
+{
+ int rc;
+ u8 reg;
+
+ rc = led_read_reg(leds_dev, addr, ®);
+ if (rc)
+ dev_err(&leds_dev->pdev->dev,
+ "Unable to read from addr=%x, rc(%d)\n", addr, rc);
+
+ reg &= ~mask;
+ reg |= val;
+
+ rc = led_write_reg(leds_dev, addr, reg);
+ if (rc)
+ dev_err(&leds_dev->pdev->dev,
+ "Unable to write to addr=%x, rc(%d)\n", addr, rc);
+ return rc;
+}
+
+static void qcom_flash_dump_regs(struct qcom_flash_device *leds_dev,
+ u8 regs[],
+ u8 array_size)
+{
+ int i;
+ u8 val;
+
+ pr_debug("===== LED register dump start =====\n");
+ for (i = 0; i < array_size; i++) {
+ led_read_reg(leds_dev, regs[i], &val);
+ pr_debug("0x%x = 0x%x\n", leds_dev->base + regs[i], val);
+ }
+ pr_debug("===== LED register dump end =====\n");
+}
+
+static u8 qcom_flash_duration_to_reg(u32 us)
+{
+ if (us < FLASH_DURATION_MIN)
+ us = FLASH_DURATION_MIN;
+ return (us - FLASH_DURATION_MIN) / FLASH_DURATION_STEP;
+}
+
+static u8 qcom_flash_current_to_reg(u32 ua)
+{
+ if (ua < FLASH_CURRENT_MIN)
+ ua = FLASH_CURRENT_MIN;
+ return (ua - FLASH_CURRENT_MIN) / FLASH_CURRENT_STEP;
+}
+
+static void clamp_align(u32 *v, u32 min, u32 max, u32 step)
+{
+ *v = clamp_val(*v, min, max);
+ if (step > 1)
+ *v = (*v - min) / step * step + min;
+}
+
+static int qcom_flash_fled_regulator_operate(struct qcom_flash_device *leds_dev,
+ bool on)
+{
+ int rc;
+
+ if (!on)
+ goto regulator_turn_off;
+
+ if (!leds_dev->flash_regulator_on) {
+ if (leds_dev->flash_boost_reg) {
+ rc = regulator_enable(leds_dev->flash_boost_reg);
+ if (rc) {
+ dev_err(&leds_dev->pdev->dev,
+ "Regulator enable failed(%d)\n", rc);
+ return rc;
+ }
+ leds_dev->flash_regulator_on = true;
+ }
+ }
+
+ return 0;
+
+regulator_turn_off:
+ if (leds_dev->flash_regulator_on) {
+ if (leds_dev->flash_boost_reg) {
+ rc = qcom_flash_masked_write(leds_dev,
+ FLASH_ENABLE_CONTROL,
+ FLASH_ENABLE_MASK,
+ FLASH_DISABLE_ALL);
+ if (rc)
+ dev_err(&leds_dev->pdev->dev,
+ "Enable reg write failed(%d)\n", rc);
+
+ rc = regulator_disable(leds_dev->flash_boost_reg);
+ if (rc) {
+ dev_err(&leds_dev->pdev->dev,
+ "Regulator disable failed(%d)\n", rc);
+ return rc;
+ }
+ leds_dev->flash_regulator_on = false;
+ }
+ }
+
+ return 0;
+}
+
+static int qcom_flash_torch_regulator_operate(struct qcom_flash_device *leds_dev,
+ bool on)
+{
+ int rc;
+
+ if (!on)
+ goto regulator_turn_off;
+
+ if (!leds_dev->torch_regulator_on) {
+ rc = regulator_enable(leds_dev->torch_boost_reg);
+ if (rc) {
+ dev_err(&leds_dev->pdev->dev,
+ "Regulator enable failed(%d)\n", rc);
+ return rc;
+ }
+ leds_dev->torch_regulator_on = true;
+ }
+ return 0;
+
+regulator_turn_off:
+ if (leds_dev->torch_regulator_on) {
+ rc = qcom_flash_masked_write(leds_dev, FLASH_ENABLE_CONTROL,
+ FLASH_ENABLE_MODULE_MASK, FLASH_DISABLE_ALL);
+ if (rc)
+ dev_err(&leds_dev->pdev->dev,
+ "Enable reg write failed(%d)\n", rc);
+
+ rc = regulator_disable(leds_dev->torch_boost_reg);
+ if (rc) {
+ dev_err(&leds_dev->pdev->dev,
+ "Regulator disable failed(%d)\n", rc);
+ return rc;
+ }
+ leds_dev->torch_regulator_on = false;
+ }
+ return 0;
+}
+
+static int qcom_flash_fled_set(struct qcom_flash_led *led, bool on)
+{
+ int rc, error;
+ u8 curr;
+ struct qcom_flash_device *leds_dev = led_to_leds_dev(led);
+ struct device *dev = &leds_dev->pdev->dev;
+
+ /* dump flash registers */
+ pr_debug("Regdump before\n");
+ qcom_flash_dump_regs(leds_dev, flash_debug_regs,
+ ARRAY_SIZE(flash_debug_regs));
+
+ /* Set led current */
+ if (on) {
+ if (led->torch_enable)
+ curr = qcom_flash_current_to_reg(led->cdev.led_cdev.brightness);
+ else
+ curr = qcom_flash_current_to_reg(led->cdev.brightness.val);
+
+ if (led->torch_enable) {
+ if (leds_dev->peripheral_subtype == FLASH_SUBTYPE_DUAL) {
+ rc = qcom_flash_torch_regulator_operate(leds_dev, true);
+ if (rc) {
+ dev_err(dev,
+ "Torch regulator operate failed(%d)\n",
+ rc);
+ return rc;
+ }
+ } else if (leds_dev->peripheral_subtype == FLASH_SUBTYPE_SINGLE) {
+ rc = qcom_flash_fled_regulator_operate(leds_dev, true);
+ if (rc) {
+ dev_err(dev,
+ "Flash regulator operate failed(%d)\n",
+ rc);
+ goto error_flash_set;
+ }
+
+ /*
+ * Write 0x80 to MODULE_ENABLE before writing
+ * 0xE0 in order to avoid a hardware bug caused
+ * by register value going from 0x00 to 0xE0.
+ */
+ rc = qcom_flash_masked_write(leds_dev,
+ FLASH_ENABLE_CONTROL,
+ FLASH_ENABLE_MODULE_MASK,
+ FLASH_ENABLE_MODULE);
+ if (rc) {
+ dev_err(dev,
+ "Enable reg write failed(%d)\n",
+ rc);
+ return rc;
+ }
+ }
+
+ rc = qcom_flash_masked_write(leds_dev,
+ FLASH_LED_UNLOCK_SECURE,
+ FLASH_SECURE_MASK, FLASH_UNLOCK_SECURE);
+ if (rc) {
+ dev_err(dev, "Secure reg write failed(%d)\n", rc);
+ goto error_reg_write;
+ }
+
+ rc = qcom_flash_masked_write(leds_dev,
+ FLASH_LED_TORCH,
+ FLASH_TORCH_MASK, FLASH_LED_TORCH_ENABLE);
+ if (rc) {
+ dev_err(dev, "Torch reg write failed(%d)\n", rc);
+ goto error_reg_write;
+ }
+
+ rc = qcom_flash_masked_write(leds_dev,
+ led->current_addr,
+ FLASH_CURRENT_MASK,
+ curr);
+ if (rc) {
+ dev_err(dev, "Current reg write failed(%d)\n", rc);
+ goto error_reg_write;
+ }
+
+ rc = qcom_flash_masked_write(leds_dev,
+ led->second_addr,
+ FLASH_CURRENT_MASK,
+ curr);
+ if (rc) {
+ dev_err(dev,
+ "2nd Current reg write failed(%d)\n",
+ rc);
+ goto error_reg_write;
+ }
+
+ qcom_flash_masked_write(leds_dev, FLASH_MAX_CURR,
+ FLASH_CURRENT_MASK,
+ TORCH_MAX_LEVEL);
+ if (rc) {
+ dev_err(dev,
+ "Max current reg write failed(%d)\n",
+ rc);
+ goto error_reg_write;
+ }
+
+ rc = qcom_flash_masked_write(leds_dev,
+ FLASH_ENABLE_CONTROL,
+ FLASH_ENABLE_MASK,
+ leds_dev->torch_enable);
+ if (rc) {
+ dev_err(dev, "Enable reg write failed(%d)\n", rc);
+ goto error_reg_write;
+ }
+
+ rc = qcom_flash_masked_write(leds_dev,
+ FLASH_LED_STROBE_CTRL,
+ FLASH_STROBE_SW,
+ FLASH_STROBE_SW);
+ if (rc) {
+ dev_err(dev,
+ "LED %d strobe reg write failed(%d)\n",
+ led->id, rc);
+ goto error_reg_write;
+ }
+ } else {
+ rc = qcom_flash_fled_regulator_operate(leds_dev, true);
+ if (rc) {
+ dev_err(dev,
+ "Flash regulator operate failed(%d)\n",
+ rc);
+ goto error_flash_set;
+ }
+
+ /* Set flash safety timer */
+ rc = qcom_flash_masked_write(leds_dev,
+ FLASH_SAFETY_TIMER,
+ FLASH_SAFETY_TIMER_MASK,
+ qcom_flash_duration_to_reg(led->cdev.timeout.val));
+ if (rc) {
+ dev_err(dev,
+ "Safety timer reg write failed(%d)\n",
+ rc);
+ goto error_flash_set;
+ }
+
+ /* Set max current */
+ rc = qcom_flash_masked_write(leds_dev,
+ FLASH_MAX_CURR, FLASH_CURRENT_MASK,
+ FLASH_MAX_LEVEL);
+ if (rc) {
+ dev_err(dev,
+ "Max current reg write failed(%d)\n",
+ rc);
+ goto error_flash_set;
+ }
+
+ /* Set clamp current */
+ rc = qcom_flash_masked_write(leds_dev,
+ FLASH_CLAMP_CURR,
+ FLASH_CURRENT_MASK,
+ qcom_flash_current_to_reg(led->clamp_curr));
+ if (rc) {
+ dev_err(dev,
+ "Clamp current reg write failed(%d)\n",
+ rc);
+ goto error_flash_set;
+ }
+
+ rc = qcom_flash_masked_write(leds_dev,
+ led->current_addr,
+ FLASH_CURRENT_MASK,
+ curr);
+ if (rc) {
+ dev_err(dev, "Current reg write failed(%d)\n", rc);
+ goto error_flash_set;
+ }
+
+ rc = qcom_flash_masked_write(leds_dev,
+ FLASH_ENABLE_CONTROL,
+ led->enable_module,
+ led->enable_module);
+ if (rc) {
+ dev_err(dev, "Enable reg write failed(%d)\n", rc);
+ goto error_flash_set;
+ }
+
+ /* TODO try to not busy wait*/
+ mdelay(1);
+
+ if (!led->strobe_type) {
+ rc = qcom_flash_masked_write(leds_dev,
+ FLASH_LED_STROBE_CTRL,
+ led->trigger_flash,
+ led->trigger_flash);
+ if (rc) {
+ dev_err(dev,
+ "LED %d strobe reg write failed(%d)\n",
+ led->id, rc);
+ goto error_flash_set;
+ }
+ } else {
+ rc = qcom_flash_masked_write(leds_dev,
+ FLASH_LED_STROBE_CTRL,
+ (led->trigger_flash | FLASH_STROBE_HW),
+ (led->trigger_flash | FLASH_STROBE_HW));
+ if (rc) {
+ dev_err(dev,
+ "LED %d strobe reg write failed(%d)\n",
+ led->id, rc);
+ goto error_flash_set;
+ }
+ }
+ }
+ } else {
+ rc = qcom_flash_masked_write(leds_dev,
+ FLASH_LED_STROBE_CTRL,
+ led->trigger_flash,
+ FLASH_DISABLE_ALL);
+ if (rc) {
+ dev_err(dev,
+ "LED %d flash write failed(%d)\n", led->id, rc);
+ if (led->torch_enable)
+ goto error_torch_set;
+ else
+ goto error_flash_set;
+ }
+
+ /* TODO try to not busy wait*/
+ mdelay(2);
+ udelay(160);
+
+ if (led->torch_enable) {
+ rc = qcom_flash_masked_write(leds_dev,
+ FLASH_LED_UNLOCK_SECURE,
+ FLASH_SECURE_MASK, FLASH_UNLOCK_SECURE);
+ if (rc) {
+ dev_err(dev, "Secure reg write failed(%d)\n", rc);
+ goto error_torch_set;
+ }
+
+ rc = qcom_flash_masked_write(leds_dev,
+ FLASH_LED_TORCH,
+ FLASH_TORCH_MASK,
+ FLASH_LED_TORCH_DISABLE);
+ if (rc) {
+ dev_err(dev, "Torch reg write failed(%d)\n", rc);
+ goto error_torch_set;
+ }
+
+ if (leds_dev->peripheral_subtype == FLASH_SUBTYPE_DUAL) {
+ rc = qcom_flash_torch_regulator_operate(leds_dev,false);
+ if (rc) {
+ dev_err(dev,
+ "Torch regulator operate failed(%d)\n",
+ rc);
+ return rc;
+ }
+ } else if (leds_dev->peripheral_subtype == FLASH_SUBTYPE_SINGLE) {
+ rc = qcom_flash_fled_regulator_operate(leds_dev, false);
+ if (rc) {
+ dev_err(dev,
+ "Flash regulator operate failed(%d)\n",
+ rc);
+ return rc;
+ }
+ }
+ } else {
+ rc = qcom_flash_masked_write(leds_dev,
+ FLASH_ENABLE_CONTROL,
+ led->enable_module &
+ ~FLASH_ENABLE_MODULE_MASK,
+ FLASH_DISABLE_ALL);
+ if (rc) {
+ dev_err(dev, "Enable reg write failed(%d)\n", rc);
+ if (led->torch_enable)
+ goto error_torch_set;
+ else
+ goto error_flash_set;
+ }
+
+ rc = qcom_flash_fled_regulator_operate(leds_dev, false);
+ if (rc) {
+ dev_err(dev,
+ "Flash regulator operate failed(%d)\n",
+ rc);
+ return rc;
+ }
+ }
+ }
+
+ pr_debug("Regdump after\n");
+ qcom_flash_dump_regs(leds_dev, flash_debug_regs, ARRAY_SIZE(flash_debug_regs));
+
+ return 0;
+
+error_reg_write:
+ if (leds_dev->peripheral_subtype == FLASH_SUBTYPE_SINGLE)
+ goto error_flash_set;
+
+error_torch_set:
+ error = qcom_flash_torch_regulator_operate(leds_dev, false);
+ if (error) {
+ dev_err(dev, "Torch regulator operate failed(%d)\n", rc);
+ return error;
+ }
+ return rc;
+
+error_flash_set:
+ error = qcom_flash_fled_regulator_operate(leds_dev, false);
+ if (error) {
+ dev_err(dev, "Flash regulator operate failed(%d)\n", rc);
+ return error;
+ }
+ return rc;
+}
+
+static int qcom_flash_led_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev);
+ struct qcom_flash_led *led = flcdev_to_led(fled_cdev);
+ struct qcom_flash_device *leds_dev = led_to_leds_dev(led);
+ u32 val = value;
+ int rc;
+ bool on;
+
+ if (val > led_cdev->max_brightness) {
+ dev_err(&leds_dev->pdev->dev, "Invalid brightness value\n");
+ return -EINVAL;
+ }
+
+ if (val) {
+ on = true;
+ clamp_align(&val, FLASH_CURRENT_MIN, led_cdev->max_brightness,
+ FLASH_CURRENT_STEP);
+ led_cdev->brightness = val;
+ led->torch_enable = true;
+ } else {
+ on = false;
+ }
+
+ mutex_lock(&leds_dev->lock);
+ rc = qcom_flash_fled_set(led, on);
+ if (rc < 0)
+ dev_err(&leds_dev->pdev->dev, "FLASH set brightness failed (%d)\n", rc);
+ mutex_unlock(&leds_dev->lock);
+ return rc;
+}
+
+static int qcom_flash_fled_brightness_set(struct led_classdev_flash *fled_cdev,
+ u32 brightness)
+{
+ clamp_align(&brightness, FLASH_CURRENT_MIN, fled_cdev->brightness.max,
+ FLASH_CURRENT_STEP);
+ fled_cdev->brightness.val = brightness;
+ return 0;
+}
+
+static int qcom_flash_fled_strobe_set(struct led_classdev_flash *fled_cdev,
+ bool state)
+{
+ struct qcom_flash_led *led = flcdev_to_led(fled_cdev);
+ struct qcom_flash_device *leds_dev = led_to_leds_dev(led);
+ int rc;
+
+ led->torch_enable = false;
+
+ mutex_lock(&leds_dev->lock);
+ rc = qcom_flash_fled_set(led, state);
+ if (rc < 0)
+ return rc;
+ mutex_unlock(&leds_dev->lock);
+
+ return 0;
+}
+
+static int qcom_flash_fled_strobe_get(struct led_classdev_flash *fled_cdev,
+ bool *state)
+{
+ //TODO
+ *state = 0;
+ return 0;
+}
+
+static int qcom_flash_fled_timeout_set(struct led_classdev_flash *fled_cdev,
+ u32 timeout)
+{
+ fled_cdev->timeout.val = timeout;
+ return 0;
+}
+
+static int qcom_flash_fled_fault_get(struct led_classdev_flash *fled_cdev,
+ u32 *fault)
+{
+ //TODO
+ *fault = 0;
+ return 0;
+}
+
+static const struct led_flash_ops flash_ops = {
+ .flash_brightness_set = qcom_flash_fled_brightness_set,
+ .strobe_set = qcom_flash_fled_strobe_set,
+ .strobe_get = qcom_flash_fled_strobe_get,
+ .timeout_set = qcom_flash_fled_timeout_set,
+ .fault_get = qcom_flash_fled_fault_get,
+};
+
+static int qcom_flash_flcdev_setup(struct qcom_flash_led *led,
+ struct device_node *node)
+{
+ int rc;
+ struct platform_device *pdev = led_to_leds_dev(led)->pdev;
+ struct led_init_data init_data = {};
+
+ init_data.fwnode = of_fwnode_handle(node);
+ init_data.devicename = "qcom-spmi-flash";
+ init_data.default_label = "flash";
+
+ led->cdev.led_cdev.brightness_set_blocking = qcom_flash_led_set;
+
+ rc = of_property_read_u32(node, "led-max-microamp",
+ &led->cdev.led_cdev.max_brightness);
+ if (rc < 0) {
+ dev_err(&pdev->dev, "Failure reading max_current, rc = %d\n", rc);
+ return rc;
+ }
+ led->cdev.led_cdev.max_brightness = min((u32) led->cdev.led_cdev.max_brightness,
+ (u32) FLASH_TORCH_CURRENT_MAX);
+
+ rc = of_property_read_u32(node, "flash-max-microamp", &led->cdev.brightness.max);
+ if (rc < 0) {
+ dev_err(&pdev->dev, "Failure reading max_current, rc = %d\n", rc);
+ return rc;
+ }
+ led->cdev.brightness.max = min((u32) led->cdev.brightness.max,
+ (u32) FLASH_CURRENT_MAX);
+ led->cdev.brightness.min = FLASH_CURRENT_MIN;
+ led->cdev.brightness.step = FLASH_CURRENT_STEP;
+ led->cdev.brightness.val = led->cdev.brightness.max;
+
+ rc = of_property_read_u32(node, "flash-max-timeout-us", &led->cdev.timeout.max);
+ if (rc < 0) {
+ dev_err(&pdev->dev, "Failure reading max_timeout, rc = %d\n", rc);
+ return rc;
+ }
+ led->cdev.timeout.max = min((u32) led->cdev.timeout.max,
+ (u32) FLASH_DURATION_MAX);
+ led->cdev.timeout.min = FLASH_DURATION_MIN;
+ led->cdev.timeout.step = FLASH_DURATION_STEP;
+ led->cdev.timeout.val = led->cdev.timeout.max;
+
+ led->cdev.ops = &flash_ops;
+ led->cdev.led_cdev.flags |= LED_DEV_CAP_FLASH;
+
+ rc = led_classdev_flash_register_ext(&pdev->dev, &led->cdev, &init_data);
+ if (rc) {
+ dev_err(&pdev->dev, "unable to register led %d,rc=%d\n", led->id, rc);
+ return rc;
+ }
+
+ return 0;
+}
+
+static int qcom_flash_setup_flash_regs(struct qcom_flash_led *led)
+{
+ int rc;
+ struct qcom_flash_device *leds_dev = led_to_leds_dev(led);
+
+ /* Set headroom */
+ rc = qcom_flash_masked_write(leds_dev, FLASH_HEADROOM,
+ FLASH_HEADROOM_MASK, led->headroom);
+ if (rc) {
+ dev_err(&leds_dev->pdev->dev, "Headroom reg write failed(%d)\n", rc);
+ return rc;
+ }
+
+ /* Set startup delay */
+ rc = qcom_flash_masked_write(leds_dev,
+ FLASH_STARTUP_DELAY, FLASH_STARTUP_DLY_MASK,
+ led->startup_dly);
+ if (rc) {
+ dev_err(&leds_dev->pdev->dev,
+ "Startup delay reg write failed(%d)\n", rc);
+ return rc;
+ }
+
+ /* Set timer control - safety or watchdog */
+ if (led->safety_timer) {
+ rc = qcom_flash_masked_write(leds_dev,
+ FLASH_LED_TMR_CTRL,
+ FLASH_TMR_MASK, FLASH_TMR_SAFETY);
+ if (rc) {
+ dev_err(&leds_dev->pdev->dev,
+ "LED timer ctrl reg write failed(%d)\n", rc);
+ return rc;
+ }
+ }
+
+ /* dump flash registers */
+ qcom_flash_dump_regs(leds_dev, flash_debug_regs, ARRAY_SIZE(flash_debug_regs));
+
+ return 0;
+}
+
+static int qcom_flash_get_config_flash(struct qcom_flash_led *led,
+ struct device_node *node)
+{
+ int rc;
+ u32 val;
+ const char *temp_string;
+ struct device *dev = &led_to_leds_dev(led)->pdev->dev;
+
+ rc = of_property_read_u32(node, "led-sources", &led->id);
+ if (rc < 0) {
+ dev_err(dev, "Failure reading led id, rc = %d\n", rc);
+ return rc;
+ }
+
+ led->default_on = false;
+ rc = of_property_read_string(node, "default-state", &temp_string);
+ if (!rc) {
+ if (strncmp(temp_string, "on", sizeof("on")) == 0)
+ led->default_on = true;
+ } else if (rc != -EINVAL)
+ return rc;
+
+ led->turn_off_delay_ms = 0;
+ rc = of_property_read_u32(node, "qcom,turn-off-delay-ms", &val);
+ if (!rc)
+ led->turn_off_delay_ms = val;
+ else if (rc != -EINVAL)
+ return rc;
+
+ if (led->id == QCOM_FLASH_ID_LED0) {
+ led->enable_module = FLASH_ENABLE_LED_0;
+ led->current_addr = FLASH_LED_0_CURR;
+ led->trigger_flash = FLASH_LED_0_OUTPUT;
+
+ led->second_addr = FLASH_LED_1_CURR;
+ } else if (led->id == QCOM_FLASH_ID_LED1) {
+ led->enable_module = FLASH_ENABLE_LED_1;
+ led->current_addr = FLASH_LED_1_CURR;
+ led->trigger_flash = FLASH_LED_1_OUTPUT;
+
+ led->second_addr = FLASH_LED_0_CURR;
+ } else {
+ dev_err(dev, "Unknown flash LED name given\n");
+ return -EINVAL;
+ }
+
+ rc = of_property_read_u32(node, "qcom,headroom", &val);
+ if (!rc)
+ led->headroom = (u8) val;
+ else if (rc == -EINVAL)
+ led->headroom = QCOM_SPMI_FLASH_HEADROOM_500MV;
+
+ rc = of_property_read_u32(node, "qcom,clamp-curr", &val);
+ if (!rc)
+ led->clamp_curr = val;
+ else if (rc == -EINVAL)
+ led->clamp_curr = FLASH_DEFAULT_CLAMP;
+
+ rc = of_property_read_u32(node, "qcom,startup-dly", &val);
+ if (!rc)
+ led->startup_dly = (u8) val;
+ else if (rc == -EINVAL)
+ led->startup_dly = QCOM_SPMI_FLASH_STARTUP_DLY_128US;
+
+ led->safety_timer = of_property_read_bool(node, "qcom,safety-timer");
+
+ return 0;
+}
+
+static int qcom_flash_setup_regs(struct qcom_flash_device *leds_dev)
+{
+ int rc;
+
+ rc = qcom_flash_masked_write(leds_dev,
+ FLASH_LED_STROBE_CTRL,
+ FLASH_STROBE_MASK, FLASH_DISABLE_ALL);
+ if (rc) {
+ dev_err(&leds_dev->pdev->dev, "LED flash write failed(%d)\n", rc);
+ return rc;
+ }
+
+ /* Disable flash LED module */
+ rc = qcom_flash_masked_write(leds_dev, FLASH_ENABLE_CONTROL,
+ FLASH_ENABLE_MODULE_MASK, FLASH_DISABLE_ALL);
+ if (rc) {
+ dev_err(&leds_dev->pdev->dev, "Enable reg write failed(%d)\n", rc);
+ return rc;
+ }
+
+ /* Set Vreg force */
+ rc = qcom_flash_masked_write(leds_dev, FLASH_VREG_OK_FORCE,
+ FLASH_VREG_MASK, FLASH_HW_VREG_OK);
+ if (rc) {
+ dev_err(&leds_dev->pdev->dev, "Vreg OK reg write failed(%d)\n", rc);
+ return rc;
+ }
+
+ /* Set self fault check */
+ rc = qcom_flash_masked_write(leds_dev, FLASH_FAULT_DETECT,
+ FLASH_FAULT_DETECT_MASK, FLASH_SELFCHECK_DISABLE);
+ if (rc) {
+ dev_err(&leds_dev->pdev->dev,
+ "Fault detect reg write failed(%d)\n", rc);
+ return rc;
+ }
+
+ /* Set mask enable */
+ rc = qcom_flash_masked_write(leds_dev, FLASH_MASK_ENABLE,
+ FLASH_MASK_REG_MASK, FLASH_MASK_1);
+ if (rc) {
+ dev_err(&leds_dev->pdev->dev, "Mask enable reg write failed(%d)\n", rc);
+ return rc;
+ }
+
+ /* Set ramp rate */
+ rc = qcom_flash_masked_write(leds_dev, FLASH_RAMP_RATE,
+ FLASH_RAMP_RATE_MASK, 0xBF);
+ if (rc) {
+ dev_err(&leds_dev->pdev->dev, "Ramp rate reg write failed(%d)\n", rc);
+ return rc;
+ }
+
+ /* Enable VPH_PWR_DROOP and set threshold to 2.9V */
+ rc = qcom_flash_masked_write(leds_dev, FLASH_VPH_PWR_DROOP,
+ FLASH_VPH_PWR_DROOP_MASK, 0xC2);
+ if (rc) {
+ dev_err(&leds_dev->pdev->dev,
+ "FLASH_VPH_PWR_DROOP reg write failed(%d)\n", rc);
+ return rc;
+ }
+
+ return 0;
+}
+
+static int qcom_flash_setup_led(struct qcom_flash_led *led,
+ struct device_node *node)
+{
+ int rc;
+
+ rc = qcom_flash_get_config_flash(led, node);
+ if (rc < 0) {
+ dev_err(&led_to_leds_dev(led)->pdev->dev,
+ "Unable to read flash config data\n");
+ return rc;
+ }
+
+ rc = qcom_flash_setup_flash_regs(led);
+ if (rc) {
+ dev_err(&led_to_leds_dev(led)->pdev->dev,
+ "FLASH initialize failed(%d)\n", rc);
+ return rc;
+ }
+
+ rc = qcom_flash_flcdev_setup(led, node);
+ if (rc < 0)
+ return rc;
+
+ /* configure default state */
+ if (led->default_on) {
+ led->cdev.led_cdev.brightness = led->cdev.led_cdev.max_brightness;
+ led->torch_enable = true;
+ mutex_lock(&led_to_leds_dev(led)->lock);
+ rc = qcom_flash_fled_set(led, true);
+ if (rc < 0)
+ return rc;
+ mutex_unlock(&led_to_leds_dev(led)->lock);
+ } else {
+ led->cdev.led_cdev.brightness = LED_OFF;
+ }
+
+ return 0;
+}
+
+static int qcom_flash_setup_leds_device(struct qcom_flash_device *leds_dev,
+ struct device_node *node,
+ struct platform_device *pdev)
+{
+ u32 reg;
+ int rc;
+
+ leds_dev->pdev = pdev;
+
+ leds_dev->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!leds_dev->regmap)
+ return -ENODEV;
+
+ rc = of_property_read_u32(node, "reg", ®);
+ if (rc < 0) {
+ dev_err(&pdev->dev, "Failure reading reg, rc = %d\n", rc);
+ return rc;
+ }
+ leds_dev->base = reg;
+
+ qcom_flash_setup_regs(leds_dev);
+
+ if (of_find_property(node, "flash-boost-supply", NULL)) {
+ leds_dev->flash_boost_reg = regulator_get(&pdev->dev, "flash-boost");
+ if (IS_ERR(leds_dev->flash_boost_reg)) {
+ rc = PTR_ERR(leds_dev->flash_boost_reg);
+ dev_err(&pdev->dev, "Regulator get failed(%d)\n", rc);
+ regulator_put(leds_dev->flash_boost_reg);
+ leds_dev->flash_boost_reg = NULL;
+ return rc;
+ }
+ }
+
+ if (of_find_property(node, "torch-boost-supply", NULL)) {
+ leds_dev->torch_boost_reg = regulator_get(&pdev->dev, "torch-boost");
+ if (IS_ERR(leds_dev->torch_boost_reg)) {
+ rc = PTR_ERR(leds_dev->torch_boost_reg);
+ dev_err(&pdev->dev, "Torch regulator get failed(%d)\n", rc);
+ regulator_put(leds_dev->flash_boost_reg);
+ regulator_put(leds_dev->torch_boost_reg);
+ leds_dev->flash_boost_reg = NULL;
+ leds_dev->torch_boost_reg = NULL;
+ return rc;
+ }
+ leds_dev->torch_enable = FLASH_ENABLE_MODULE;
+ } else {
+ leds_dev->torch_enable = FLASH_ENABLE_ALL;
+ }
+
+ rc = led_read_reg(leds_dev, FLASH_PERIPHERAL_SUBTYPE,
+ &leds_dev->peripheral_subtype);
+ if (rc) {
+ dev_err(&pdev->dev,
+ "Unable to read from addr=%x, rc(%d)\n",
+ FLASH_PERIPHERAL_SUBTYPE, rc);
+ }
+
+ mutex_init(&leds_dev->lock);
+
+ return 0;
+}
+
+static int qcom_flash_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct qcom_flash_device *leds_dev;
+ struct device_node *node = dev->of_node;
+ struct qcom_flash_led *led;
+ struct device_node *temp;
+ int rc, i, parsed_leds = 0;
+
+ leds_dev = devm_kzalloc(dev, sizeof(struct qcom_flash_device), GFP_KERNEL);
+ if (!leds_dev)
+ return -ENOMEM;
+
+ rc = qcom_flash_setup_leds_device(leds_dev, node, pdev);
+ if (rc) {
+ pr_debug("Probe failed setting up base (%d)\n", rc);
+ return rc;
+ }
+
+ platform_set_drvdata(pdev, leds_dev);
+
+ for_each_child_of_node(node, temp) {
+ led = &leds_dev->leds[parsed_leds];
+
+ rc = qcom_flash_setup_led(led, temp);
+ if (rc) {
+ for (i = 0; i < parsed_leds; i++)
+ led_classdev_flash_unregister(&leds_dev->leds[i].cdev);
+ pr_debug("Probe failed setting up leds (%d)\n", rc);
+ return rc;
+ }
+
+ parsed_leds++;
+ }
+ leds_dev->num_leds = parsed_leds;
+ return 0;
+}
+
+static int qcom_flash_remove(struct platform_device *pdev)
+{
+ struct qcom_flash_device *leds_dev = platform_get_drvdata(pdev);
+ int i, parsed_leds = leds_dev->num_leds;
+
+ mutex_destroy(&leds_dev->lock);
+ if (leds_dev->flash_boost_reg)
+ regulator_put(leds_dev->flash_boost_reg);
+ if (leds_dev->torch_boost_reg)
+ regulator_put(leds_dev->torch_boost_reg);
+ for (i = 0; i < parsed_leds; i++)
+ led_classdev_flash_unregister(&leds_dev->leds[i].cdev);
+
+ return 0;
+}
+
+static const struct of_device_id qcom_flash_spmi_of_match[] = {
+ { .compatible = "qcom,spmi-flash" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, qcom_flash_spmi_of_match);
+
+static struct platform_driver qcom_flash_driver = {
+ .driver = {
+ .name = "qcom,spmi-flash",
+ .of_match_table = of_match_ptr(qcom_flash_spmi_of_match),
+ },
+ .probe = qcom_flash_probe,
+ .remove = qcom_flash_remove,
+};
+module_platform_driver(qcom_flash_driver);
+
+MODULE_DESCRIPTION("Qualcomm SPMI Flash LED driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxxx>");
--
2.30.0
