Use helper variable dev instead of always writing &client->dev, or
&priv->client->dev, or even &led->priv->client->dev.
With one more line moved reverse christmas tree is also achieved.
Signed-off-by: Marek Behún <marek.behun@xxxxxx>
Cc: Dan Murphy <dmurphy@xxxxxx>
---
drivers/leds/leds-lm3697.c | 75 ++++++++++++++++++--------------------
1 file changed, 36 insertions(+), 39 deletions(-)
diff --git a/drivers/leds/leds-lm3697.c b/drivers/leds/leds-lm3697.c
index 479776ac36c35..0c5c29730c407 100644
--- a/drivers/leds/leds-lm3697.c
+++ b/drivers/leds/leds-lm3697.c
@@ -115,6 +115,7 @@ static int lm3697_brightness_set(struct led_classdev *led_cdev,
struct lm3697_led *led = container_of(led_cdev, struct lm3697_led,
led_dev);
int ctrl_en_val = (1 << led->control_bank);
+ struct device *dev = led->priv->dev;
int ret;
mutex_lock(&led->priv->lock);
@@ -123,7 +124,7 @@ static int lm3697_brightness_set(struct led_classdev *led_cdev,
ret = regmap_update_bits(led->priv->regmap, LM3697_CTRL_ENABLE,
ctrl_en_val, ~ctrl_en_val);
if (ret) {
- dev_err(&led->priv->client->dev, "Cannot write ctrl register\n");
+ dev_err(dev, "Cannot write ctrl register\n");
goto brightness_out;
}
@@ -131,8 +132,7 @@ static int lm3697_brightness_set(struct led_classdev *led_cdev,
} else {
ret = ti_lmu_common_set_brightness(&led->lmu_data, brt_val);
if (ret) {
- dev_err(&led->priv->client->dev,
- "Cannot write brightness\n");
+ dev_err(dev, "Cannot write brightness\n");
goto brightness_out;
}
@@ -141,8 +141,7 @@ static int lm3697_brightness_set(struct led_classdev *led_cdev,
LM3697_CTRL_ENABLE,
ctrl_en_val, ctrl_en_val);
if (ret) {
- dev_err(&led->priv->client->dev,
- "Cannot enable the device\n");
+ dev_err(dev, "Cannot enable the device\n");
goto brightness_out;
}
@@ -157,6 +156,7 @@ static int lm3697_brightness_set(struct led_classdev *led_cdev,
static int lm3697_init(struct lm3697 *priv)
{
+ struct device *dev = priv->dev;
struct lm3697_led *led;
int i, ret;
@@ -165,26 +165,26 @@ static int lm3697_init(struct lm3697 *priv)
} else {
ret = regmap_write(priv->regmap, LM3697_RESET, LM3697_SW_RESET);
if (ret) {
- dev_err(&priv->client->dev, "Cannot reset the device\n");
+ dev_err(dev, "Cannot reset the device\n");
goto out;
}
}
ret = regmap_write(priv->regmap, LM3697_CTRL_ENABLE, 0x0);
if (ret) {
- dev_err(&priv->client->dev, "Cannot write ctrl enable\n");
+ dev_err(dev, "Cannot write ctrl enable\n");
goto out;
}
ret = regmap_write(priv->regmap, LM3697_OUTPUT_CONFIG, priv->bank_cfg);
if (ret)
- dev_err(&priv->client->dev, "Cannot write OUTPUT config\n");
+ dev_err(dev, "Cannot write OUTPUT config\n");
for (i = 0; i < LM3697_MAX_CONTROL_BANKS; i++) {
led = &priv->leds[i];
ret = ti_lmu_common_set_ramp(&led->lmu_data);
if (ret)
- dev_err(&priv->client->dev, "Setting the ramp rate failed\n");
+ dev_err(dev, "Setting the ramp rate failed\n");
}
out:
return ret;
@@ -193,37 +193,37 @@ static int lm3697_init(struct lm3697 *priv)
static int lm3697_probe_dt(struct lm3697 *priv)
{
struct fwnode_handle *child = NULL;
+ struct device *dev = priv->dev;
struct lm3697_led *led;
+ int ret = -EINVAL;
int control_bank;
size_t i = 0;
- int ret = -EINVAL;
int j;
- priv->enable_gpio = devm_gpiod_get_optional(&priv->client->dev,
- "enable", GPIOD_OUT_LOW);
+ priv->enable_gpio = devm_gpiod_get_optional(dev, "enable",
+ GPIOD_OUT_LOW);
if (IS_ERR(priv->enable_gpio)) {
ret = PTR_ERR(priv->enable_gpio);
- dev_err(&priv->client->dev, "Failed to get enable gpio: %d\n",
- ret);
+ dev_err(dev, "Failed to get enable gpio: %d\n", ret);
return ret;
}
- priv->regulator = devm_regulator_get(&priv->client->dev, "vled");
+ priv->regulator = devm_regulator_get(dev, "vled");
if (IS_ERR(priv->regulator))
priv->regulator = NULL;
- device_for_each_child_node(priv->dev, child) {
+ device_for_each_child_node(dev, child) {
struct led_init_data init_data = {};
ret = fwnode_property_read_u32(child, "reg", &control_bank);
if (ret) {
- dev_err(&priv->client->dev, "reg property missing\n");
+ dev_err(dev, "reg property missing\n");
fwnode_handle_put(child);
goto child_out;
}
if (control_bank > LM3697_CONTROL_B) {
- dev_err(&priv->client->dev, "reg property is invalid\n");
+ dev_err(dev, "reg property is invalid\n");
ret = -EINVAL;
fwnode_handle_put(child);
goto child_out;
@@ -231,10 +231,10 @@ static int lm3697_probe_dt(struct lm3697 *priv)
led = &priv->leds[i];
- ret = ti_lmu_common_get_brt_res(&priv->client->dev,
- child, &led->lmu_data);
+ ret = ti_lmu_common_get_brt_res(dev, child, &led->lmu_data);
if (ret)
- dev_warn(&priv->client->dev, "brightness resolution property missing\n");
+ dev_warn(dev,
+ "brightness resolution property missing\n");
led->control_bank = control_bank;
led->lmu_data.regmap = priv->regmap;
@@ -247,7 +247,7 @@ static int lm3697_probe_dt(struct lm3697 *priv)
led->num_leds = fwnode_property_count_u32(child, "led-sources");
if (led->num_leds > LM3697_MAX_LED_STRINGS) {
- dev_err(&priv->client->dev, "Too many LED strings defined\n");
+ dev_err(dev, "Too many LED strings defined\n");
continue;
}
@@ -255,7 +255,7 @@ static int lm3697_probe_dt(struct lm3697 *priv)
led->hvled_strings,
led->num_leds);
if (ret) {
- dev_err(&priv->client->dev, "led-sources property missing\n");
+ dev_err(dev, "led-sources property missing\n");
fwnode_handle_put(child);
goto child_out;
}
@@ -264,10 +264,9 @@ static int lm3697_probe_dt(struct lm3697 *priv)
priv->bank_cfg |=
(led->control_bank << led->hvled_strings[j]);
- ret = ti_lmu_common_get_ramp_params(&priv->client->dev,
- child, &led->lmu_data);
+ ret = ti_lmu_common_get_ramp_params(dev, child, &led->lmu_data);
if (ret)
- dev_warn(&priv->client->dev, "runtime-ramp properties missing\n");
+ dev_warn(dev, "runtime-ramp properties missing\n");
fwnode_property_read_string(child, "linux,default-trigger",
&led->led_dev.default_trigger);
@@ -281,11 +280,10 @@ static int lm3697_probe_dt(struct lm3697 *priv)
led->led_dev.max_brightness = led->lmu_data.max_brightness;
led->led_dev.brightness_set_blocking = lm3697_brightness_set;
- ret = devm_led_classdev_register_ext(priv->dev, &led->led_dev,
+ ret = devm_led_classdev_register_ext(dev, &led->led_dev,
&init_data);
if (ret) {
- dev_err(&priv->client->dev, "led register err: %d\n",
- ret);
+ dev_err(dev, "led register err: %d\n", ret);
fwnode_handle_put(child);
goto child_out;
}
@@ -300,18 +298,18 @@ static int lm3697_probe_dt(struct lm3697 *priv)
static int lm3697_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
+ struct device *dev = &client->dev;
struct lm3697 *led;
int count;
int ret;
- count = device_get_child_node_count(&client->dev);
+ count = device_get_child_node_count(dev);
if (!count) {
- dev_err(&client->dev, "LEDs are not defined in device tree!");
+ dev_err(dev, "LEDs are not defined in device tree!");
return -ENODEV;
}
- led = devm_kzalloc(&client->dev, struct_size(led, leds, count),
- GFP_KERNEL);
+ led = devm_kzalloc(dev, struct_size(led, leds, count), GFP_KERNEL);
if (!led)
return -ENOMEM;
@@ -319,12 +317,11 @@ static int lm3697_probe(struct i2c_client *client,
i2c_set_clientdata(client, led);
led->client = client;
- led->dev = &client->dev;
+ led->dev = dev;
led->regmap = devm_regmap_init_i2c(client, &lm3697_regmap_config);
if (IS_ERR(led->regmap)) {
ret = PTR_ERR(led->regmap);
- dev_err(&client->dev, "Failed to allocate register map: %d\n",
- ret);
+ dev_err(dev, "Failed to allocate register map: %d\n", ret);
return ret;
}
@@ -338,12 +335,13 @@ static int lm3697_probe(struct i2c_client *client,
static int lm3697_remove(struct i2c_client *client)
{
struct lm3697 *led = i2c_get_clientdata(client);
+ struct device *dev = &led->client->dev;
int ret;
ret = regmap_update_bits(led->regmap, LM3697_CTRL_ENABLE,
LM3697_CTRL_A_B_EN, 0);
if (ret) {
- dev_err(&led->client->dev, "Failed to disable the device\n");
+ dev_err(dev, "Failed to disable the device\n");
return ret;
}
@@ -353,8 +351,7 @@ static int lm3697_remove(struct i2c_client *client)
if (led->regulator) {
ret = regulator_disable(led->regulator);
if (ret)
- dev_err(&led->client->dev,
- "Failed to disable regulator\n");
+ dev_err(dev, "Failed to disable regulator\n");
}
mutex_destroy(&led->lock);
--
2.26.2
