Convert the gpio-leds binding to DT schema format.
Drop the last example as the node name collides when built, and it doesn't
add much value.
Cc: Pavel Machek <pavel@xxxxxx>
Cc: Dan Murphy <dmurphy@xxxxxx>
Acked-by: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
---
Jacek, Please take this via led tree
v2:
- no change
.../devicetree/bindings/leds/leds-gpio.txt | 75 ----------------
.../devicetree/bindings/leds/leds-gpio.yaml | 86 +++++++++++++++++++
2 files changed, 86 insertions(+), 75 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/leds/leds-gpio.txt
create mode 100644 Documentation/devicetree/bindings/leds/leds-gpio.yaml
diff --git a/Documentation/devicetree/bindings/leds/leds-gpio.txt b/Documentation/devicetree/bindings/leds/leds-gpio.txt
deleted file mode 100644
index d21281b63d38..000000000000
--- a/Documentation/devicetree/bindings/leds/leds-gpio.txt
+++ /dev/null
@@ -1,75 +0,0 @@
-LEDs connected to GPIO lines
-
-Required properties:
-- compatible : should be "gpio-leds".
-
-Each LED is represented as a sub-node of the gpio-leds device. Each
-node's name represents the name of the corresponding LED.
-
-LED sub-node properties:
-- gpios : Should specify the LED's GPIO, see "gpios property" in
- Documentation/devicetree/bindings/gpio/gpio.txt. Active low LEDs should be
- indicated using flags in the GPIO specifier.
-- function : (optional)
- see Documentation/devicetree/bindings/leds/common.txt
-- color : (optional)
- see Documentation/devicetree/bindings/leds/common.txt
-- label : (optional)
- see Documentation/devicetree/bindings/leds/common.txt (deprecated)
-- linux,default-trigger : (optional)
- see Documentation/devicetree/bindings/leds/common.txt
-- default-state: (optional) The initial state of the LED.
- see Documentation/devicetree/bindings/leds/common.txt
-- retain-state-suspended: (optional) The suspend state can be retained.Such
- as charge-led gpio.
-- retain-state-shutdown: (optional) Retain the state of the LED on shutdown.
- Useful in BMC systems, for example when the BMC is rebooted while the host
- remains up.
-- panic-indicator : (optional)
- see Documentation/devicetree/bindings/leds/common.txt
-
-Examples:
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-
-leds {
- compatible = "gpio-leds";
- led0 {
- gpios = <&mcu_pio 0 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "disk-activity";
- function = LED_FUNCTION_DISK;
- };
-
- led1 {
- gpios = <&mcu_pio 1 GPIO_ACTIVE_HIGH>;
- /* Keep LED on if BIOS detected hardware fault */
- default-state = "keep";
- function = LED_FUNCTION_FAULT;
- };
-};
-
-run-control {
- compatible = "gpio-leds";
- led0 {
- gpios = <&mpc8572 6 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_RED>;
- default-state = "off";
- };
- led1 {
- gpios = <&mpc8572 7 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_GREEN>;
- default-state = "on";
- };
-};
-
-leds {
- compatible = "gpio-leds";
-
- led0 {
- gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "max8903-charger-charging";
- retain-state-suspended;
- function = LED_FUNCTION_CHARGE;
- };
-};
diff --git a/Documentation/devicetree/bindings/leds/leds-gpio.yaml b/Documentation/devicetree/bindings/leds/leds-gpio.yaml
new file mode 100644
index 000000000000..0e75b185dd19
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-gpio.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LEDs connected to GPIO lines
+
+maintainers:
+ - Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
+ - Pavel Machek <pavel@xxxxxx>
+
+description:
+ Each LED is represented as a sub-node of the gpio-leds device. Each
+ node's name represents the name of the corresponding LED.
+
+properties:
+ compatible:
+ const: gpio-leds
+
+patternProperties:
+ # The first form is preferred, but fall back to just 'led' anywhere in the
+ # node name to at least catch some child nodes.
+ "(^led-[0-9a-f]$|led)":
+ type: object
+
+ allOf:
+ - $ref: common.yaml#
+
+ properties:
+ gpios:
+ maxItems: 1
+
+ retain-state-suspended:
+ description:
+ The suspend state can be retained.Such as charge-led gpio.
+ type: boolean
+
+ retain-state-shutdown:
+ description:
+ Retain the state of the LED on shutdown. Useful in BMC systems, for
+ example when the BMC is rebooted while the host remains up.
+ type: boolean
+
+ required:
+ - gpios
+
+additionalProperties: false
+
+examples:
+ - |
+
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/leds/common.h>
+
+ leds {
+ compatible = "gpio-leds";
+ led-0 {
+ gpios = <&mcu_pio 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "disk-activity";
+ function = LED_FUNCTION_DISK;
+ };
+
+ led-1 {
+ gpios = <&mcu_pio 1 GPIO_ACTIVE_HIGH>;
+ /* Keep LED on if BIOS detected hardware fault */
+ default-state = "keep";
+ function = LED_FUNCTION_FAULT;
+ };
+ };
+
+ run-control {
+ compatible = "gpio-leds";
+ led-0 {
+ gpios = <&mpc8572 6 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_RED>;
+ default-state = "off";
+ };
+ led-1 {
+ gpios = <&mpc8572 7 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ default-state = "on";
+ };
+ };
+
+...
--
2.20.1
