add enable-gpios to describe HWEN pin
Signed-off-by: Andreas Kemnade <andreas@xxxxxxxxxxxx>
Acked-by: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
---
changes in v2: added example
changes in v3: added Acked-by
changes in v4: moved enable-gpios to the right position
in the example
.../bindings/leds/backlight/lm3630a-backlight.yaml | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
index dc129d9a329e..c8470628fe02 100644
--- a/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
+++ b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
@@ -29,6 +29,10 @@ properties:
'#size-cells':
const: 0
+ enable-gpios:
+ description: GPIO to use to enable/disable the backlight (HWEN pin).
+ maxItems: 1
+
required:
- compatible
- reg
@@ -96,6 +100,7 @@ examples:
led-controller@38 {
compatible = "ti,lm3630a";
reg = <0x38>;
+ enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
--
2.20.1
