*** BLURB HERE *** Hello there, I recently tested ledtrig-gpio on an embedded controller and one of the issues I had involve not requesting the user input pin as GPIO. In many embedded systems, a pin could be muxed as several functions, and requesting the pin as GPIO is necessary to let pinmux select the pin as a GPIO instead of, say an I2C pin. I'd like to learn whether it is appropriate to assume user of ledtrig-gpio really intends to use GPIOs and not some weird pins that are used as other functions. Kun Yi (2): ledtrig-gpio: Request user input pin as GPIO ledtrig-gpio: 0 is a valid GPIO number drivers/leds/trigger/ledtrig-gpio.c | 35 ++++++++++++++++++++--------- 1 file changed, 24 insertions(+), 11 deletions(-) -- 2.21.0.1020.gf2820cf01a-goog
