Hi! > this adds support for the LED controller of the 8 RGB LEDs on the front > side of CZ.NIC's Turris 1.x router. > > This is the first version, please review, especially my solution of the > HW trigger problem. > > At first I wanted to create a classic led-trigger for the HW triggers > for these LEDs, but because of the RGB model I went with the solution where > there are three separate LEDs (R, G and B) for each RGB LED, and the HW > trigger controls the whole RGB group, so setting HW trigger on one channel > should set it on all three channels. > > Another solution would be to create 8 LEDs, where their color could be > changed via a special attribute file named "color", and a classic led-trigger > could be used for implementing the HW trigger. This solution though would > not allow to use kernel SW triggers for the each color channel > separately. So... there was extensive discussion abour rgb leds. You may want to look at thread "leds: lp5024: Add the LP5024/18 RGB LED..." Currently, we use single device per LED channel. If you want driver in quickly, just do that. Best regards, Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Attachment:
signature.asc
Description: Digital signature
