Hello, LEDs controlled by Baseboard Management Controllers (BMCs) are sometimes required to retain their state across BMC resets. BMC resets may occur whilst the host is alive, thus the chassis and host system remain powered up. In these two patches I define an new devicetree property to describe the behaviour for GPIO LEDs and add support to the leds-gpio driver. Changes in v2: * Expand BMC to Baseboard Management Controller at least once in each commit message. v1: https://lkml.org/lkml/2017/8/25/44 Please review! Cheers, Andrew Andrew Jeffery (2): dt-bindings: leds: gpio: Add optional retain-state-shutdown property leds: gpio: Allow LED to retain state at shutdown Documentation/devicetree/bindings/leds/leds-gpio.txt | 3 +++ drivers/leds/leds-gpio.c | 7 ++++++- include/linux/leds.h | 2 ++ 3 files changed, 11 insertions(+), 1 deletion(-) -- 2.11.0
