This patch extends the device tree support for the pca9532 by adding the leds 'default-state' property. Changes in v2: - remove prescaler and pwm configuration by none generic DT properties Signed-off-by: Felix Brack <fb@xxxxxxx> --- .../devicetree/bindings/leds/leds-pca9532.txt | 10 +++++++ drivers/leds/leds-pca9532.c | 31 +++++++++++++++++++++- include/linux/leds-pca9532.h | 4 +-- 3 files changed, 42 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/leds/leds-pca9532.txt b/Documentation/devicetree/bindings/leds/leds-pca9532.txt index 198f3ba..8374075 100644 --- a/Documentation/devicetree/bindings/leds/leds-pca9532.txt +++ b/Documentation/devicetree/bindings/leds/leds-pca9532.txt @@ -17,6 +17,8 @@ Optional sub-node properties: - label: see Documentation/devicetree/bindings/leds/common.txt - type: Output configuration, see dt-bindings/leds/leds-pca9532.h (default NONE) - linux,default-trigger: see Documentation/devicetree/bindings/leds/common.txt + - default-state: see Documentation/devicetree/bindings/leds/common.txt + This property is only valid for sub-nodes of type <PCA9532_TYPE_LED>. Example: #include <dt-bindings/leds/leds-pca9532.h> @@ -33,6 +35,14 @@ Example: label = "pca:green:power"; type = <PCA9532_TYPE_LED>; }; + kernel-booting { + type = <PCA9532_TYPE_LED>; + default-state = "on"; + }; + sys-stat { + type = <PCA9532_TYPE_LED>; + default-state = "keep"; // don't touch, was set by U-Boot + }; }; For more product information please see the link below: diff --git a/drivers/leds/leds-pca9532.c b/drivers/leds/leds-pca9532.c index 06e6310..66ef280 100644 --- a/drivers/leds/leds-pca9532.c +++ b/drivers/leds/leds-pca9532.c @@ -254,6 +254,21 @@ static void pca9532_input_work(struct work_struct *work) mutex_unlock(&data->update_lock); } +static enum pca9532_state pca9532_getled(struct pca9532_led *led) +{ + struct i2c_client *client = led->client; + struct pca9532_data *data = i2c_get_clientdata(client); + u8 maxleds = data->chip_info->num_leds; + char reg; + enum pca9532_state ret; + + mutex_lock(&data->update_lock); + reg = i2c_smbus_read_byte_data(client, LED_REG(maxleds, led->id)); + ret = reg >> LED_NUM(led->id)/2; + mutex_unlock(&data->update_lock); + return ret; +} + #ifdef CONFIG_LEDS_PCA9532_GPIO static int pca9532_gpio_request_pin(struct gpio_chip *gc, unsigned offset) { @@ -366,7 +381,10 @@ static int pca9532_configure(struct i2c_client *client, gpios++; break; case PCA9532_TYPE_LED: - led->state = pled->state; + if (pled->state == PCA9532_KEEP) + led->state = pca9532_getled(led); + else + led->state = pled->state; led->name = pled->name; led->ldev.name = led->name; led->ldev.default_trigger = pled->default_trigger; @@ -456,6 +474,7 @@ pca9532_of_populate_pdata(struct device *dev, struct device_node *np) const struct of_device_id *match; int devid, maxleds; int i = 0; + const char *state; match = of_match_device(of_pca9532_leds_match, dev); if (!match) @@ -475,6 +494,16 @@ pca9532_of_populate_pdata(struct device *dev, struct device_node *np) of_property_read_u32(child, "type", &pdata->leds[i].type); of_property_read_string(child, "linux,default-trigger", &pdata->leds[i].default_trigger); + if (!of_property_read_string(child, "default-state", &state)) { + if (!strcmp(state, "on")) + pdata->leds[i].state = PCA9532_ON; + else if (!strcmp(state, "keep")) + pdata->leds[i].state = PCA9532_KEEP; + else if (!strcmp(state, "pwm0")) + pdata->leds[i].state = PCA9532_PWM0; + else if (!strcmp(state, "pwm1")) + pdata->leds[i].state = PCA9532_PWM1; + } if (++i >= maxleds) { of_node_put(child); break; diff --git a/include/linux/leds-pca9532.h b/include/linux/leds-pca9532.h index d215b45..a327b1aa 100644 --- a/include/linux/leds-pca9532.h +++ b/include/linux/leds-pca9532.h @@ -22,7 +22,8 @@ enum pca9532_state { PCA9532_OFF = 0x0, PCA9532_ON = 0x1, PCA9532_PWM0 = 0x2, - PCA9532_PWM1 = 0x3 + PCA9532_PWM1 = 0x3, + PCA9532_KEEP = 0xff }; struct pca9532_led { @@ -44,4 +45,3 @@ struct pca9532_platform_data { }; #endif /* __LINUX_PCA9532_H */ - -- 2.7.4