Re: [PATCH v2 1/2] leds: lp3952: Remove ACPI support for lp3952

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Andy,

Thanks for the patch.

What about CONFIG_ACPI dependency in drivers/leds/Kconfig?

Best regards,
Jacek Anaszewski

On 03/22/2017 04:00 PM, Andy Shevchenko wrote:
> In ACPI world any ID should be carefully chosen and registered
> officially. The discussion [1] as I read it gets to wilful assignment
> an ID for non-existing real DSDT example.
> 
> Rafael already told [2] how this device would be enumerated using
> compatible string. To be more precise look at the possible DSDT excerpt
> below:
> 
> 	Device (LDX0) {
> 		Name (_HID, "PRP0001")
> 		Name (_DDN, "TI LP3952 compatible led driver")
> 		...
> 	})
> 
> 	Name (_DSD, Package () {
> 		ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
> 		Package () {
> 			Package () {"compatible", "ti,lp3952"},
> 			...
> 		}
> 	})
> Based on above, remove non-official ACPI IDs and enumeration from the
> driver.
> 
> Note: currently driver has no compatible strings at all, to make above
> working one should add at least one.
> 
> [1] https://e2e.ti.com/support/power_management/led_driver/f/192/t/524926
> [2] https://www.spinics.net/lists/linux-acpi/msg67125.html
> 
> Cc: Tony Makkiel <tony.makkiel@xxxxxxxxx>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
> ---
>  v2:
>  - extend commit message to show how PRP0001 is supposed to work
>  - update link to Rafael's review
>  - revert wrong ret variable fix
>  drivers/leds/leds-lp3952.c | 11 -----------
>  1 file changed, 11 deletions(-)
> 
> diff --git a/drivers/leds/leds-lp3952.c b/drivers/leds/leds-lp3952.c
> index 4847e89883a7..5184436b8905 100644
> --- a/drivers/leds/leds-lp3952.c
> +++ b/drivers/leds/leds-lp3952.c
> @@ -10,7 +10,6 @@
>   *
>   */
>  
> -#include <linux/acpi.h>
>  #include <linux/delay.h>
>  #include <linux/gpio.h>
>  #include <linux/i2c.h>
> @@ -276,19 +275,9 @@ static const struct i2c_device_id lp3952_id[] = {
>  };
>  MODULE_DEVICE_TABLE(i2c, lp3952_id);
>  
> -#ifdef CONFIG_ACPI
> -static const struct acpi_device_id lp3952_acpi_match[] = {
> -	{"TXNW3952", 0},
> -	{}
> -};
> -
> -MODULE_DEVICE_TABLE(acpi, lp3952_acpi_match);
> -#endif
> -
>  static struct i2c_driver lp3952_i2c_driver = {
>  	.driver = {
>  			.name = LP3952_NAME,
> -			.acpi_match_table = ACPI_PTR(lp3952_acpi_match),
>  	},
>  	.probe = lp3952_probe,
>  	.remove = lp3952_remove,
> 




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux