On 07/11/2016 02:20 PM, Tony wrote:
Thank you for the comments Jacek.
[...]
+static int lp3952_set_pattern_gen_cmd(struct lp3952_led_array *priv,
+ u8 cmd_index, u8 r, u8 g, u8 b,
+ enum lp3952_tt tt, enum lp3952_cet cet)
+{
+ int ret;
+ struct ptrn_gen_cmd line = {
+ .r = r,
+ .g = g,
+ .b = b,
+ .cet = cet,
+ .tt = tt
+ };
+
+ if (cmd_index >= LP3952_CMD_REG_COUNT)
+ return -EINVAL;
+
+ ret = lp3952_register_write(priv->client,
+ LP3952_REG_CMD_0 + cmd_index * 2,
+ line.bytes.msb);
+ if (ret)
+ return ret;
+
+ return (lp3952_register_write(priv->client,
+ LP3952_REG_CMD_0 + cmd_index * 2 + 1,
+ line.bytes.lsb));
These brackets are redundant.
+}
+
+static int lp3952_configure(struct lp3952_led_array *priv)
+{
+ int ret;
+
+ /* Disable any LEDs on from any previous conf. */
+ ret = lp3952_register_write(priv->client, LP3952_REG_LED_CTRL,
0);
+ if (ret)
+ return ret;
+
+ /* enable rgb patter, loop */
+ ret = lp3952_register_write(priv->client,
LP3952_REG_PAT_GEN_CTRL,
+ LP3952_PATRN_LOOP | LP3952_PATRN_GEN_EN);
+ if (ret)
+ return ret;
+
+ /* Update Bit 6 (Active mode), Select both Led sets, Bit [1:0] */
+ ret = lp3952_register_write(priv->client, LP3952_REG_ENABLES,
+ LP3952_ACTIVE_MODE | LP3952_INT_B00ST_LDR);
+ if (ret)
+ return ret;
+
+ /* Set Cmd1 for RGB intensity,cmd and transition time */
+ return (lp3952_set_pattern_gen_cmd(priv, 0, I46, I71, I100, TT0,
+ CET197));
Ditto.
If you agree I can remove them and take the patch.
Yes please :). Thank you for your help.
Patch applied to the for-next branch of linux-leds.git.
Thank you for your effort and determination in submitting
subsequent versions.
--
Best regards,
Jacek Anaszewski
--
To unsubscribe from this list: send the line "unsubscribe linux-leds" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
