Hello, This series add a new driver for On Semiconductor NCP5623, a 3-channel I2C LED driver. It is used in our design to drive a RGB LED. The first patch introduces the device tree binding, while the second patch adds the driver itself. Best regards, Florian --- Jacek: I did not addressed your request about dynamic allocation, as discussed by Pavel and me in the previous thread. Tell me if you are fine like this. Otherwise I will do the necessary changes. --- Since v1: - Adapted the DT binding (led-max-microamp for each LED node) - Removed underscores from node names in the example - Use brightness_set_blocking to avoid workqueue - Introduced LED_to_CMD macro to avoid switch statement - Various other fixes Florian Vaussard (2): leds: ncp5623: Add device tree binding documentation leds: Add driver for NCP5623 3-channel I2C LED driver .../devicetree/bindings/leds/leds-ncp5623.txt | 60 +++++ drivers/leds/Kconfig | 11 + drivers/leds/Makefile | 1 + drivers/leds/leds-ncp5623.c | 269 +++++++++++++++++++++ 4 files changed, 341 insertions(+) create mode 100644 Documentation/devicetree/bindings/leds/leds-ncp5623.txt create mode 100644 drivers/leds/leds-ncp5623.c -- 2.5.5 -- To unsubscribe from this list: send the line "unsubscribe linux-leds" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
