On Thu, 26 Nov 2015, Milo Kim wrote: > LM3532, LM3631, LM3632, LM3633, LM3695 and LM3697 use common dt-bindings > for describing backlight device. > > Cc: Rob Herring <robh+dt@xxxxxxxxxx> > Cc: devicetree@xxxxxxxxxxxxxxx > Cc: Lee Jones <lee.jones@xxxxxxxxxx> > Cc: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx> > Cc: Mark Brown <broonie@xxxxxxxxxx> > Cc: linux-leds@xxxxxxxxxxxxxxx > Cc: linux-kernel@xxxxxxxxxxxxxxx > Signed-off-by: Milo Kim <milo.kim@xxxxxx> > --- > .../bindings/leds/backlight/ti-lmu-backlight.txt | 65 ++++++++++++++++++++++ > 1 file changed, 65 insertions(+) > create mode 100644 Documentation/devicetree/bindings/leds/backlight/ti-lmu-backlight.txt Any reason that Jingoo wasn't Cc'ed here? > diff --git a/Documentation/devicetree/bindings/leds/backlight/ti-lmu-backlight.txt b/Documentation/devicetree/bindings/leds/backlight/ti-lmu-backlight.txt > new file mode 100644 > index 0000000..c2c35b2 > --- /dev/null > +++ b/Documentation/devicetree/bindings/leds/backlight/ti-lmu-backlight.txt > @@ -0,0 +1,65 @@ > +TI LMU backlight device tree bindings > + > +Required property: > + - compatible: Should be one of: > + "ti,lm3532-backlight" > + "ti,lm3631-backlight" > + "ti,lm3632-backlight" > + "ti,lm3633-backlight" > + "ti,lm3695-backlight" > + "ti,lm3697-backlight" > + > +Optional properties: > + There are two backlight control mode. One is I2C, the other is PWM mode. > + Following properties are only specified in PWM mode. > + Please note that LMU backlight device can have only one PWM channel. > + > + - pwms: OF device-tree PWM specification. > + - pwm-names: a list of names for the PWM devices specified in the "pwms" > + property. > + > + For the PWM user nodes, please refer to [1]. > + > +Child nodes: > + LMU backlight is represented as sub-nodes of the TI LMU device [2]. > + So, LMU backlight should have more than one backlight child node. > + Each node exactly matches with backlight control bank configuration. > + Maximum numbers of child nodes depend on the device. > + 1 = LM3631, LM3632, LM3695 > + 2 = LM3633, LM3697 > + 3 = LM3532 > + > + Required property of a child node: > + - led-sources: List of enabled channels from 0 to 2. > + Please refer to LED binding [3]. > + For output channels, please refer to the datasheets [4]. > + > + Optional properties of a child node: > + - label: Backlight channel identification. > + Please refer to LED binding [3]. > + - default-brightness-level: Backlight initial brightness value. > + Type is <u32>. It is set as soon as backlight > + device is created. > + 0 ~ 2047 = LM3631, LM3632, LM3633, LM3695 and > + LM3697 > + 0 ~ 255 = LM3532 > + - ramp-up-msec, ramp-down-msec: Light dimming effect properties. > + Type is <u32>. Unit is millisecond. > + 0 ~ 65 msec = LM3532 > + 0 ~ 4000 msec = LM3631 > + 0 ~ 16000 msec = LM3633 and LM3697 > + - pwm-period: PWM period. Only valid in PWM brightness mode. > + Type is <u32>. If this property is missing, then control > + mode is set to I2C by default. > + > +Examples: Please refer to ti-lmu dt-bindings. [2]. > + > +[1] ../pwm/pwm.txt > +[2] ../mfd/ti-lmu.txt > +[3] ../leds/common.txt > +[4] LM3532: http://www.ti.com/product/LM3532/datasheet > + LM3631: http://www.ti.com/product/LM3631/datasheet > + LM3632: http://www.ti.com/product/LM3632A/datasheet > + LM3633: http://www.ti.com/product/LM3633/datasheet > + LM3695: Datasheet is not opened yet, but only two strings are used. > + LM3697: http://www.ti.com/product/LM3697/datasheet -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe linux-leds" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
