This patch adds more init register configuration options:
- Serial LEDs multiplexing.
- Serial LEDs clock signal low/high polarity.
- Serial LEDs data signal low/high polarity.
- Serial LEDs shift direction inverted/normal.
Signed-off-by: Álvaro Fernández Rojas <noltari@xxxxxxxxx>
---
drivers/leds/leds-bcm6328.c | 15 ++++++++++++++-
1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/drivers/leds/leds-bcm6328.c b/drivers/leds/leds-bcm6328.c
index 4de8a85..898a804 100644
--- a/drivers/leds/leds-bcm6328.c
+++ b/drivers/leds/leds-bcm6328.c
@@ -41,6 +41,11 @@
#define BCM6328_SERIAL_LED_SHIFT_DIR BIT(16)
#define BCM6328_LED_SHIFT_TEST BIT(30)
#define BCM6328_LED_TEST BIT(31)
+#define BCM6328_INIT_MASK (BCM6328_SERIAL_LED_EN | \
+ BCM6328_SERIAL_LED_MUX | \
+ BCM6328_SERIAL_LED_CLK_NPOL | \
+ BCM6328_SERIAL_LED_DATA_PPOL | \
+ BCM6328_SERIAL_LED_SHIFT_DIR)
#define BCM6328_LED_MODE_MASK 3
#define BCM6328_LED_MODE_OFF 0
@@ -366,9 +371,17 @@ static int bcm6328_leds_probe(struct platform_device *pdev)
bcm6328_led_write(mem + BCM6328_REG_LNKACTSEL_LO, 0);
val = bcm6328_led_read(mem + BCM6328_REG_INIT);
- val &= ~BCM6328_SERIAL_LED_EN;
+ val &= ~(BCM6328_INIT_MASK);
if (of_property_read_bool(np, "brcm,serial-leds"))
val |= BCM6328_SERIAL_LED_EN;
+ if (of_property_read_bool(np, "brcm,serial-mux"))
+ val |= BCM6328_SERIAL_LED_MUX;
+ if (of_property_read_bool(np, "brcm,serial-clk-low"))
+ val |= BCM6328_SERIAL_LED_CLK_NPOL;
+ if (!of_property_read_bool(np, "brcm,serial-dat-low"))
+ val |= BCM6328_SERIAL_LED_DATA_PPOL;
+ if (!of_property_read_bool(np, "brcm,serial-shift-inv"))
+ val |= BCM6328_SERIAL_LED_SHIFT_DIR;
bcm6328_led_write(mem + BCM6328_REG_INIT, val);
for_each_available_child_of_node(np, child) {
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-leds" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
