This patch changes the comments in the HTC Magician machine source code to better describe used devices and interfaces. Signed-off-by: Petr Cvek <petr.cvek@xxxxxx> --- arch/arm/mach-pxa/magician.c | 46 +++++++++++++++++++++++++++++--------------- 1 file changed, 31 insertions(+), 15 deletions(-) diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index c10f932..c8fa379 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -57,31 +57,31 @@ static unsigned long magician_pin_config[] __initdata = { GPIO80_nCS_4, GPIO33_nCS_5, - /* I2C */ + /* I2C UDA1380 + OV9640 */ GPIO117_I2C_SCL, GPIO118_I2C_SDA, - /* PWM 0 */ + /* PWM 0 - LCD backlight */ GPIO16_PWM0_OUT, - /* I2S */ + /* I2S UDA1380 capture */ GPIO28_I2S_BITCLK_OUT, GPIO29_I2S_SDATA_IN, GPIO31_I2S_SYNC, GPIO113_I2S_SYSCLK, - /* SSP 1 */ + /* SSP 1 UDA1380 playback */ GPIO23_SSP1_SCLK, GPIO24_SSP1_SFRM, GPIO25_SSP1_TXD, - /* SSP 2 */ + /* SSP 2 TSC2046 touchscreen */ GPIO19_SSP2_SCLK, GPIO14_SSP2_SFRM, GPIO89_SSP2_TXD, GPIO88_SSP2_RXD, - /* MMC */ + /* MMC/SD/SDHC slot */ GPIO32_MMC_CLK, GPIO92_MMC_DAT_0, GPIO109_MMC_DAT_1, @@ -92,7 +92,7 @@ static unsigned long magician_pin_config[] __initdata = { /* LCD */ GPIOxx_LCD_TFT_16BPP, - /* QCI */ + /* QCI camera interface */ GPIO12_CIF_DD_7, GPIO17_CIF_DD_6, GPIO50_CIF_DD_3, @@ -120,7 +120,7 @@ static unsigned long magician_pin_config[] __initdata = { }; /* - * IRDA + * IrDA */ static struct pxaficp_platform_data magician_ficp_info = { @@ -175,7 +175,9 @@ static struct platform_device gpio_keys = { /* * EGPIO (Xilinx CPLD) * - * 7 32-bit aligned 8-bit registers: 3x output, 1x irq, 3x input + * 32-bit aligned 8-bit registers + * 16 possible registers (reg windows size), only 7 used: + * 3x output, 1x irq, 3x input */ static struct resource egpio_resources[] = { @@ -197,7 +199,10 @@ static struct htc_egpio_chip egpio_chips[] = { .gpio_base = MAGICIAN_EGPIO(0, 0), .num_gpios = 24, .direction = HTC_EGPIO_OUTPUT, - .initial_values = 0x40, /* EGPIO_MAGICIAN_GSM_RESET */ + /* + * Depends on modules configuration + */ + .initial_values = 0x40, }, [1] = { .reg_start = 4, @@ -228,7 +233,7 @@ static struct platform_device egpio = { }; /* - * LCD - Toppoly TD028STEB1 or Samsung LTP280QV + * PXAFB LCD - Toppoly TD028STEB1 or Samsung LTP280QV */ static struct pxafb_mode_info toppoly_modes[] = { @@ -372,6 +377,13 @@ static void magician_backlight_exit(struct device *dev) gpio_free_array(ARRAY_AND_SIZE(magician_bl_gpios)); } +/* + * LCD PWM backlight (main) + * + * MP1521 frequency should be: + * 100-400 Hz = 2 .5*10^6 - 10 *10^6 ns + */ + static struct platform_pwm_backlight_data backlight_data = { .pwm_id = 0, .max_brightness = 272, @@ -393,7 +405,7 @@ static struct platform_device backlight = { }; /* - * LEDs + * GPIO LEDs, Phone keys backlight, vibra */ static struct gpio_led gpio_leds[] = { @@ -422,6 +434,10 @@ static struct platform_device leds_gpio = { }, }; +/* + * PASIC3 LEDs + */ + static struct pasic3_led pasic3_leds[] = { { .led = { @@ -459,7 +475,7 @@ static struct pasic3_leds_machinfo pasic3_leds_info = { }; /* - * PASIC3 with DS1WM + * PASIC3 DS1WM */ static struct resource pasic3_resources[] = { @@ -492,7 +508,7 @@ static struct platform_device pasic3 = { }; /* - * USB "Transceiver" + * PXA UDC */ static struct resource gpio_vbus_resource = { @@ -695,7 +711,7 @@ static struct platform_device strataflash = { }; /* - * I2C + * PXA I2C main controller */ static struct i2c_pxa_platform_data i2c_info = { -- 1.7.12.1 -- To unsubscribe from this list: send the line "unsubscribe linux-leds" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html