Spaces at the starting of a line are removed, indentation using
tab, instead of space. Also, line width of more than 80 characters
is also taken care of.
Two warnings are left alone to aid better readability.
Signed-off-by: Muhammad Falak R Wani <falakreyaz@xxxxxxxxx>
---
drivers/leds/leds-ipaq-micro.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/leds/leds-ipaq-micro.c b/drivers/leds/leds-ipaq-micro.c
index 1206215..fa262b6 100644
--- a/drivers/leds/leds-ipaq-micro.c
+++ b/drivers/leds/leds-ipaq-micro.c
@@ -16,9 +16,9 @@
#define LED_YELLOW 0x00
#define LED_GREEN 0x01
-#define LED_EN (1 << 4) /* LED ON/OFF 0:off, 1:on */
-#define LED_AUTOSTOP (1 << 5) /* LED ON/OFF auto stop set 0:disable, 1:enable */
-#define LED_ALWAYS (1 << 6) /* LED Interrupt Mask 0:No mask, 1:mask */
+#define LED_EN (1 << 4) /* LED ON/OFF 0:off, 1:on */
+#define LED_AUTOSTOP (1 << 5) /* LED ON/OFF auto stop set 0:disable, 1:enable */
+#define LED_ALWAYS (1 << 6) /* LED Interrupt Mask 0:No mask, 1:mask */
static void micro_leds_brightness_set(struct led_classdev *led_cdev,
enum led_brightness value)
@@ -79,14 +79,14 @@ static int micro_leds_blink_set(struct led_classdev *led_cdev,
};
msg.tx_data[0] = LED_GREEN;
- if (*delay_on > IPAQ_LED_MAX_DUTY ||
+ if (*delay_on > IPAQ_LED_MAX_DUTY ||
*delay_off > IPAQ_LED_MAX_DUTY)
- return -EINVAL;
+ return -EINVAL;
- if (*delay_on == 0 && *delay_off == 0) {
- *delay_on = 100;
- *delay_off = 100;
- }
+ if (*delay_on == 0 && *delay_off == 0) {
+ *delay_on = 100;
+ *delay_off = 100;
+ }
msg.tx_data[1] = 0;
if (*delay_on >= IPAQ_LED_MAX_DUTY)
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-leds" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
