Petr Cvek <petr.cvek@xxxxxx> writes:
> Dne 20.8.2015 v 19:23 Robert Jarzmik napsal(a):
>> Petr Cvek <petr.cvek@xxxxxx> writes:
>>> +static void magician_udc_command(int cmd)
>>> +{
>>> + if (cmd == PXA2XX_UDC_CMD_CONNECT)
>>> + UP2OCR |= UP2OCR_DPPUE | UP2OCR_DPPUBE;
>>> + else if (cmd == PXA2XX_UDC_CMD_DISCONNECT)
>>> + UP2OCR &= ~(UP2OCR_DPPUE | UP2OCR_DPPUBE);
>>> +}
>>> +
>>> +/* HACK, shared USB connected state with pda-power */
>>> +int my_usb_online = 1;
>> Definitely not, a global (ie. non static variable) is not something I'll let
>> in. Besides, can't a "gpio_get_value()" give the same level of information ?
>
> I will gladly remove it, but I want my phone to be able to charge and work as
> USB device (and maybe as USB host).
Okay, I understand that, but see below.
>>
>>> +static int magician_udc_is_connected(void)
>>> +{
>>> + /* Shared with pda_power or gpio-vbus */
>>> + return my_usb_online;
>> gpio_get_value() something ?
>>
>
> I need to use EGPIO_MAGICIAN_CABLE_INSERT1 GPIO in pda_power to be able to detect source for charging.
>
>>> +}
>>> +
>>> +static struct pxa2xx_udc_mach_info magician_udc_info __initdata = {
>>> + .udc_command = magician_udc_command,
>>> + .udc_is_connected = magician_udc_is_connected,
>> I don't think udc_is_connected is a field used by pxa27x_udc.c, it it ? The VBus
>> connection information comes from a transciever, usually from gpio_vbus driver
>> nowadays.
>
> Really? Well I guess I took a bad route :-D (when I tried to learn how to add an
> udc support). As there are two ways to define udc_is_connected, would it be
> possible to remove this field altogether (only mioa701 and lubbock have relevant
> use, but if this function is never called, then it is dead code)?
>
> Do you know which code / source is responsible for gpio_vbus -> pxa27x_udc
> communication about inserted cable? I will need to put some assert for
> testing.
Yes.
- hooking: udc->transceiver = usb_get_phy(USB_PHY_TYPE_USB2);
- detection: gpio_vbus_work()
-> usb_gadget_vbus_connect()
-> pxa_udc_vbus_session()
>>> @@ -1175,6 +1207,11 @@ static struct platform_device *devices[] __initdata = {
>>>
>>> /* NOTICE mutually exclusive with PXA I2C */
>>> &i2c_gpio_bus_alt,
>>> +
>>> + /* NOTICE mutually exclusive with UDC*/
>> Euh why so ?
>> In arch/arm/mach-pxa/mioa701.c they cooperate, why can't they for magician ?
>
> In mioa701 the GPIO13_nUSB_DETECT GPIO is requested by gpio_vbus driver, used in
> pda_power (without request) and "used" in PXA UDC driver without request. It is
> basically similar solution as my (ugly) global variable.
>
> Solution: I will try to use that second new GPIO (EGPIO_MAGICIAN_CABLE_INSERT2)
> for that, so there is no GPIO request dependency. I may create new names for
> them (magician.h).
Cool.
And if by chance you find an even cleaner solution, don't hesitate to modify
mioa701, hein ? ;)
Cheers.
--
Robert
--
To unsubscribe from this list: send the line "unsubscribe linux-leds" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
