On Thu, 6 Aug 2015 20:35:58 +0300, Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx> wrote: > Do you know which GPIOs are used for leds? > > Since the GPIO host controller is listed in the DSDT, I think patching > the leds device should be pretty simple. That would be fantastic. Green status: 62, green, active low Red status: 63, red, active low HDD racks: 70 to 75, red, active low USB: 17, blue, active low I tested all via sysfs with gpio-f7188x driver loaded (numbers above are the values I wrote to /sys/class/gpio/register). "green status" led works minimally out of the box: static-on when the box is on, off otherwise (I would make it blink on S3, for example). Regards, -- Vincent Pelletier -- To unsubscribe from this list: send the line "unsubscribe linux-leds" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
