The following series implements LED driver for PowerNV platform.
PowerNV platform has below type of LEDs:
- System attention
Indicates there is a problem with the system that needs attention.
- Identify
Helps the user locate/identify a particular FRU or resource in the
system.
- Fault
Indicates there is a problem with the FRU or resource at the
location with which the indicator is associated.
On PowerNV (Non Virtualized) platform OPAL firmware provides LED information
to host via device tree (location code and LED type). During init we check
for 'ibm,opal/leds' node in device tree to enable LED driver. And we use
OPAL API's to get/set LEDs.
Note that on PowerNV platform firmware can activate fault LED, if it can isolate
the problem. Also one can modify the LEDs using service processor interface. None
of these involes kernel. Hence we retain LED state in unload path.
Sample LED device tree output:
------------------------------
leds {
compatible = "ibm,opal-v3-led";
led-mode = "lightpath";
U78C9.001.RST0027-P1-C1 {
led-types = "identify", "fault";
};
...
...
}
Sample sysfs output:
--------------------
.
├── U78CB.001.WZS008R-A1:fault
│ ├── brightness
│ ├── device -> ../../../opal_leds
│ ├── max_brightness
│ ├── power
│ │ ├── async
│ │ ├── autosuspend_delay_ms
│ │ ├── control
│ │ ├── runtime_active_kids
│ │ ├── runtime_active_time
│ │ ├── runtime_enabled
│ │ ├── runtime_status
│ │ ├── runtime_suspended_time
│ │ └── runtime_usage
│ ├── subsystem -> ../../../../../class/leds
│ ├── trigger
│ └── uevent
├── U78CB.001.WZS008R-A1:identify
│ ├── brightness
│ ├── device -> ../../../opal_leds
│ ├── max_brightness
│ ├── power
│ │ ├── async
│ │ ├── autosuspend_delay_ms
│ │ ├── control
│ │ ├── runtime_active_kids
│ │ ├── runtime_active_time
│ │ ├── runtime_enabled
│ │ ├── runtime_status
│ │ ├── runtime_suspended_time
│ │ └── runtime_usage
│ ├── subsystem -> ../../../../../class/leds
│ ├── trigger
│ └── uevent
....
....
....
patch 1/2: PowerNV architecture specific code. This adds necessary
OPAL APIs.
patch 2/2: Create LED platform device and export OPAL symbols
patch 3/3: Actual LED driver implemenation for PowerNV platform.
Note that this version of patchset is based on top of v4.2-rc2.
@Jacek,
Let me know if you want me to rebase this patchset on top of LED tree.
Previous patchset:
v5: https://lists.ozlabs.org/pipermail/linuxppc-dev/2015-July/130602.html
v4: https://lists.ozlabs.org/pipermail/linuxppc-dev/2015-April/128028.html
v3: https://lists.ozlabs.org/pipermail/linuxppc-dev/2015-April/127702.html
v2: https://lists.ozlabs.org/pipermail/linuxppc-dev/2015-March/126301.html
v1: https://lists.ozlabs.org/pipermail/linuxppc-dev/2015-March/125705.html
Changes in v6:
- Added loc_code and type to powernv_led_data structure instead of parsing
them from led classdev name.
- Fixed documentation issues.
- Fixed mutex_destry issue
- Replaced led_classdev_register with devm_led_classdev_register
Changes in v5:
- Rebased on top of Linus tree
- Renamed led as leds and updated documentation
- As Ben and Arnd suggested, removed phandle from documenation
- As Ben suggested removed led-loc device tree property
- As Jacek suggested, added back compatible property to documentation
Changes in v4:
- Updated macros to reflect platform.
- s/u64/__be64/g for big endian data we get from firmware
- Addressed review comments from Jacek. Major once are:
Removed list in powernv_led_data structure
s/kzalloc/devm_kzalloc/
Removed compatible property from documentation
s/powernv_led_set_queue/powernv_brightness_set/
- Removed LED specific brightness_set/get function. Instead this version
uses single function to queue all LED set/get requests. Later we use
LED name to detect LED type and value.
- Removed hardcoded LED type used in previous version. Instead we use
led-types property to form LED classdev.
Changes in v3:
- Addressed review comments from Jacek. Major once are:
Replaced spin lock and mutex and removed redundant structures
Replaced pr_* with dev_*
Moved OPAL platform sepcific part to separate patch
Moved repteated code to common function
Added device tree documentation for LEDs
Changes in v2:
- Rebased patches on top of mpe's next branch
https://git.kernel.org/cgit/linux/kernel/git/mpe/linux.git/log/?h=next
- Added System Attention Indicator support
- Removed redundant code in leds-powernv.c file
Anshuman Khandual (1):
powerpc/powernv: Add OPAL interfaces for accessing and modifying
system LED states
Vasant Hegde (2):
powerpc/powernv: Create LED platform device
leds/powernv: Add driver for PowerNV platform
.../devicetree/bindings/leds/leds-powernv.txt | 26 ++
arch/powerpc/include/asm/opal-api.h | 25 +-
arch/powerpc/include/asm/opal.h | 4 +
arch/powerpc/platforms/powernv/opal-wrappers.S | 2 +
arch/powerpc/platforms/powernv/opal.c | 12 +-
drivers/leds/Kconfig | 11 +
drivers/leds/Makefile | 1 +
drivers/leds/leds-powernv.c | 422 +++++++++++++++++++++
8 files changed, 501 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/leds/leds-powernv.txt
create mode 100644 drivers/leds/leds-powernv.c
--
Vasant
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe linux-leds" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
