Hi Alvaro,
Thanks for the update. Since this patch will require also DT ack,
please add devicetree@xxxxxxxxxxxxxxx on cc as you'll be posting
next version
On Fri, 24 Apr 2015 19:06:15 +0200
Álvaro Fernández Rojas <noltari@xxxxxxxxx> wrote:
> This adds device tree binding documentation for the Broadcom BCM6328 LED controller.
>
> Signed-off-by: Álvaro Fernández Rojas <noltari@xxxxxxxxx>
> Signed-off-by: Jonas Gorski <jogo@xxxxxxxxxxx>
> ---
> v3: introduce changes suggested by Jacek
> - Revert compatible string to "brcm,bcm6328-leds".
> - Improved description.
> - Renamed normal LEDs to hardware controlled.
> - Explain that LEDs are active high by default on active-low optional property.
> - Properties are now grouped depending on the type of LED and optional requirement.
> - Added more examples to explain hardware controlled LEDs and activity/link selection.
> v2: Introduce changes suggested by Florian and Jonas.
> - Change compatible string to "brcm,bcm6328-leds-ctrl".
> - Make valid LEDs statement more strict.
> - Remove compatible strings from LED subnodes.
> - Clarify that LEDs are active high by default.
> - Add a better description for brcm,link-signal-sources and brcm,activity-signal-sources.
>
> .../devicetree/bindings/leds/leds-bcm6328.txt | 311 +++++++++++++++++++++
> 1 file changed, 311 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/leds/leds-bcm6328.txt
>
> diff --git a/Documentation/devicetree/bindings/leds/leds-bcm6328.txt b/Documentation/devicetree/bindings/leds/leds-bcm6328.txt
> new file mode 100644
> index 0000000..6d838f8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/leds-bcm6328.txt
> @@ -0,0 +1,311 @@
> +LEDs connected to Broadcom BCM6328 controller
> +
> +This controller is present on BCM6318, BCM6328, BCM6362 and BCM63268.
> +In these SoCs it's possible to control LEDs both as GPIOs or by hardware.
> +However, on some devices there are Serial LEDs (LEDs connected to a 74x164
> +controller), which can either be controlled by software (exporting the 74x164
> +as spi-gpio. See Documentation/devicetree/bindings/gpio/gpio-74x164.txt), or
> +by hardware using this driver.
> +Some of these Serial LEDs are hardware controlled (e.g. ethernet LEDs) and
> +exporting the 74x164 as spi-gpio prevents those LEDs to be hardware
> +controlled, so the only chance to keep them working is by using this driver.
> +
> +BCM6328 LED controller has a HWDIS register, which controls whether a LED
> +should be controlled by a hardware signal instead of the MODE register value,
> +with 0 meaning hardware control enabled and 1 hardware control disabled. This
> +is usually 1:1 for hardware to LED signals, but through the activity/link
> +registers you have some limited control over rerouting the LEDs (as
> +explained later in brcm,link-signal-sources). Even if a LED is hardware
> +controlled you are still able to make it blink or light it up if it isn't,
> +but you can't turn it off if the hardware decides to light it up. For this
> +reason, hardware controlled LEDs aren't registered as LED class devices.
> +
> +Required properties:
> +- compatible: should be : "brcm,bcm6328-leds".
Please drop the colon after "should be".
Also it is more common to insert a space before the colon character.
e.g.:
compatible : should be ...
Please apply this rule to each property.
> +- #address-cells: must be 1
> +- #size-cells: must be 0
> +- reg: BCM6328 LED controller address and size.
>
> +
> +Optional properties:
> +- brcm,serial-leds: boolean which enables Serial LEDs.
How about:
brcm,serial-leds: Boolean, enables Serial LEDs.
Boolean should begin with capital letter. Please refer to the other
bindings in Documentation/devicetree/bindings to keep the style of
DT documentation consistent.
Also default value should be mentioned.
> +Each LED is represented as a sub-node of the brcm,bcm6328-leds device.
> +
> +LED sub-node required properties:
How about:
Required properties for sub-nodes:
> +- reg: LED pin number (only LEDs 0 to 23 are valid).
> +
> +Software controlled LED optional properties:
How about:
Optional properties for sub-nodes related to software controlled LEDs:
> +- label (optional): see Documentation/devicetree/bindings/leds/common.txt
> +- active-low (optional): boolean that makes LED active low.
> + Default: false
> +- default-state (optional): see
> + Documentation/devicetree/bindings/leds/leds-gpio.txt
> +- linux,default-trigger (optional): see
> + Documentation/devicetree/bindings/leds/common.txt
Please drop "(optional)" as you are already mentioned this in the
section header.
> +Hardware controlled LED optional properties:
How about:
Optional properties for sub-nodes related to hardware controlled LEDs:
> +- brcm,hardware-controlled: boolean that makes this LED hardware
> + controlled.
> +- brcm,link-signal-sources: An array of hardware link
> + signal sources. Up to four link hardware signals can get muxed into
> + these LEDs. Only valid for LEDs 0 to 7, where LED signals 0 to 3 may
> + be muxed to LEDs 0 to 3, and signals 4 to 7 may be muxed to LEDs
> + 4 to 7. A signal can be muxed to more than one LED, and one LED can
> + have more than one source signal.
> +- brcm,activity-signal-sources: An array of hardware activity
> + signal sources. Up to four activity hardware signals can get muxed into
> + these LEDs. Only valid for LEDs 0 to 7, where LED signals 0 to 3 may
> + be muxed to LEDs 0 to 3, and signals 4 to 7 may be muxed to LEDs
> + 4 to 7. A signal can be muxed to more than one LED, and one LED can
> + have more than one source signal.
> +
> +example 1) BCM6328 with 4 EPHY LEDs
> +
> +leds0: led-controller@10000800 {
> + compatible = "brcm,bcm6328-leds";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x10000800 0x24>;
> +
> + alarm_red@2 {
> + reg = <2>;
> + active-low;
> + label = "red:alarm";
> + };
> + inet_green@3 {
> + reg = <3>;
> + active-low;
> + label = "green:inet";
> + };
> + power_green@4 {
> + reg = <4>;
> + active-low;
> + label = "green:power";
> + default-state = "on";
> + };
> + ephy0_spd@17 {
> + reg = <17>;
> + brcm,hardware-controlled;
> + };
> + ephy1_spd@18 {
> + reg = <18>;
> + brcm,hardware-controlled;
> + };
> + ephy2_spd@19 {
> + reg = <19>;
> + brcm,hardware-controlled;
> + };
> + ephy3_spd@20 {
> + reg = <20>;
> + brcm,hardware-controlled;
> + };
> +};
> +
> +example 2) BCM63268 with Serial/GPHY0 LEDs
> +
> +leds0: led-controller@10001900 {
> + compatible = "brcm,bcm6328-leds";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x10001900 0x24>;
> + brcm,serial-leds;
> +
> + gphy0_spd0@0 {
> + reg = <0>;
> + brcm,hardware-controlled;
> + brcm,link-signal-sources = <0>;
> + };
> + gphy0_spd1@1 {
> + reg = <1>;
> + brcm,hardware-controlled;
> + brcm,link-signal-sources = <1>;
> + };
> + inet_red@2 {
> + reg = <2>;
> + active-low;
> + label = "red:inet";
> + };
> + dsl_green@3 {
> + reg = <3>;
> + active-low;
> + label = "green:dsl";
> + };
> + usb_green@4 {
> + reg = <4>;
> + active-low;
> + label = "green:usb";
> + };
> + wps_green@7 {
> + reg = <7>;
> + active-low;
> + label = "green:wps";
> + };
> + inet_green@8 {
> + reg = <8>;
> + active-low;
> + label = "green:inet";
> + };
> + ephy0_act@9 {
> + reg = <9>;
> + brcm,hardware-controlled;
> + };
> + ephy1_act@10 {
> + reg = <10>;
> + brcm,hardware-controlled;
> + };
> + ephy2_act@11 {
> + reg = <11>;
> + brcm,hardware-controlled;
> + };
> + gphy0_act@12 {
> + reg = <12>;
> + brcm,hardware-controlled;
> + };
> + ephy0_spd@13 {
> + reg = <13>;
> + brcm,hardware-controlled;
> + };
> + ephy1_spd@14 {
> + reg = <14>;
> + brcm,hardware-controlled;
> + };
> + ephy2_spd@15 {
> + reg = <15>;
> + brcm,hardware-controlled;
> + };
> + power_green@20 {
> + reg = <20>;
> + active-low;
> + label = "green:power";
> + default-state = "on";
> + };
> +};
> +
> +example 3) BCM6362 with 1 LED for each EPHY
> +
> +leds0: led-controller@10001900 {
> + compatible = "brcm,bcm6328-leds";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x10001900 0x24>;
> +
> + usb@0 {
> + reg = <0>;
> + brcm,hardware-controlled;
> + brcm,link-signal-sources = <0>;
> + brcm,activity-signal-sources = <0>;
> + /* USB link/activity routed to USB LED */
> + };
> + inet@1 {
> + reg = <1>;
> + brcm,hardware-controlled;
> + brcm,activity-signal-sources = <1>;
> + /* INET activity routed to INET LED */
> + };
> + ephy0@4 {
> + reg = <4>;
> + brcm,hardware-controlled;
> + brcm,link-signal-sources = <4>;
> + /* EPHY0 link routed to EPHY0 LED */
> + };
> + ephy1@5 {
> + reg = <5>;
> + brcm,hardware-controlled;
> + brcm,link-signal-sources = <5>;
> + /* EPHY1 link routed to EPHY1 LED */
> + };
> + ephy2@6 {
> + reg = <6>;
> + brcm,hardware-controlled;
> + brcm,link-signal-sources = <6>;
> + /* EPHY2 link routed to EPHY2 LED */
> + };
> + ephy3@7 {
> + reg = <7>;
> + brcm,hardware-controlled;
> + brcm,link-signal-sources = <7>;
> + /* EPHY3 link routed to EPHY3 LED */
> + };
> + power_green@20 {
> + reg = <20>;
> + active-low;
> + label = "green:power";
> + default-state = "on";
> + };
> +};
> +
> +example 4) BCM6362 with 1 LED for all EPHYs
> +
> +leds0: led-controller@10001900 {
> + compatible = "brcm,bcm6328-leds";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x10001900 0x24>;
> +
> + usb@0 {
> + reg = <0>;
> + brcm,hardware-controlled;
> + brcm,link-signal-sources = <0 1>;
> + brcm,activity-signal-sources = <0 1>;
> + /* USB/INET link/activity routed to USB LED */
> + };
> + ephy@4 {
> + reg = <4>;
> + brcm,hardware-controlled;
> + brcm,link-signal-sources = <4 5 6 7>;
> + /* EPHY0/1/2/3 link routed to EPHY0 LED */
> + };
> + power_green@20 {
> + reg = <20>;
> + active-low;
> + label = "green:power";
> + default-state = "on";
> + };
> +};
> +
> +example 5) BCM6362 with EPHY LEDs swapped
> +
> +leds0: led-controller@10001900 {
> + compatible = "brcm,bcm6328-leds";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x10001900 0x24>;
> +
> + usb@0 {
> + reg = <0>;
> + brcm,hardware-controlled;
> + brcm,link-signal-sources = <0>;
> + brcm,activity-signal-sources = <0 1>;
> + /* USB link/activity & INET activity routed to USB LED */
> + };
> + ephy0@4 {
> + reg = <4>;
> + brcm,hardware-controlled;
> + brcm,link-signal-sources = <7>;
> + /* EPHY3 link routed to EPHY0 LED */
> + };
> + ephy1@5 {
> + reg = <5>;
> + brcm,hardware-controlled;
> + brcm,link-signal-sources = <6>;
> + /* EPHY2 link routed to EPHY1 LED */
> + };
> + ephy2@6 {
> + reg = <6>;
> + brcm,hardware-controlled;
> + brcm,link-signal-sources = <5>;
> + /* EPHY1 link routed to EPHY2 LED */
> + };
> + ephy3@7 {
> + reg = <7>;
> + brcm,hardware-controlled;
> + brcm,link-signal-sources = <4>;
> + /* EPHY0 link routed to EPHY3 LED */
> + };
> + power_green@20 {
> + reg = <20>;
> + active-low;
> + label = "green:power";
> + default-state = "on";
> + };
> +};
--
Best Regards,
Jacek Anaszewski
--
To unsubscribe from this list: send the line "unsubscribe linux-leds" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
