Hi, I am currently working on converting the LED driver leds-netxbig to DT. Doing so, I am also considering to move the GPIO extension bus functions (which are currently parts of leds-netxbig) into a separate driver. On the LaCie "Big Network" board family (netxbig), the LEDs are controlled by a CPLD. In turn, the CPLD can be configured (mostly the LEDs modes) through a kind of parallel GPIO bus, called GPIO extension bus. Two registers (address and data) are exposed. Each of them is made up of several GPIOs. An extra GPIO is used to notify the CPLD that the registers have been updated. The leds-netxbig driver uses some dedicated functions (prefixed by "gpio_ext_") to handle the GPIO bus extension. On the latest "Big Network" boards, this bus is also used to enable the PM wakeup sources: the CPLD can be asked to keep powered some devices (as the RTC or the Ethernet PHY) while the board is down. I think it could be nice to expose this feature to the userland. That's why I am thinking about moving the GPIO extension bus support into a separate driver. The problem is that I can't find a proper location for a such driver. AFAIK, it doesn't fit with anything existing supported by Linux. Maybe I should consider drivers/bus ? Or even drivers/misc ? Also from a DT point, it not clear to me how the resulting bus and LEDs driver are going to work together. Any advice is welcome. Thanks in advance. Simon
Attachment:
signature.asc
Description: Digital signature
