On Wed, Jun 26, 2013 at 7:17 AM, Tony Lindgren <tony@xxxxxxxxxxx> wrote:
> Similar to tca6507, we can just parse the standard LED
> properties for pca9633.
>
> Tested on a pca9632, which is compatible with pca9633.
>
> Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
>
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/pca9633.txt
> @@ -0,0 +1,42 @@
> +LEDs connected to pca9633 or pca9632
> +
> +Required properties:
> +- compatible : should be : "nxp,pca963x"
> +
> +Each led is represented as a sub-node of the nxp,pca9633 device.
> +
> +LED sub-node properties:
> +- label : (optional) see Documentation/devicetree/bindings/leds/common.txt
> +- reg : number of LED line (could be from 0 to 4)
> +- linux,default-trigger : (optional)
> + see Documentation/devicetree/bindings/leds/common.txt
> +
> +Examples:
> +
> +pca9632: pca9632 {
> + compatible = "nxp,pca9632", "nxp,pca963x";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x62>;
> +
> + red@0 {
> + label = "red";
> + reg = <0>;
> + linux,default-trigger = "none";
> + };
> + green@1 {
> + label = "green";
> + reg = <1>;
> + linux,default-trigger = "none";
> + };
> + blue@2 {
> + label = "blue";
> + reg = <2>;
> + linux,default-trigger = "none";
> + };
> + unused@3 {
> + label = "unused";
> + reg = <3>;
> + linux,default-trigger = "none";
> + };
> +};
> --- a/drivers/leds/leds-pca9633.c
> +++ b/drivers/leds/leds-pca9633.c
> @@ -22,6 +22,7 @@
> #include <linux/i2c.h>
> #include <linux/workqueue.h>
> #include <linux/slab.h>
> +#include <linux/of.h>
> #include <linux/platform_data/leds-pca9633.h>
>
> /* LED select registers determine the source that drives LED outputs */
> @@ -93,6 +94,61 @@ static void pca9633_led_set(struct led_classdev *led_cdev,
> schedule_work(&pca9633->work);
> }
>
> +#ifdef CONFIG_OF
Shall we use "#if IS_ENABLED(CONFIG_OF)", as Grant pointed out recently.
-Bryan
> +static struct pca9633_platform_data *
> +pca9633_dt_init(struct i2c_client *client)
> +{
> + struct device_node *np = client->dev.of_node, *child;
> + struct pca9633_platform_data *pdata;
> + struct led_info *pca9633_leds;
> + int count;
> +
> + count = of_get_child_count(np);
> + if (!count || count > 4)
> + return ERR_PTR(-ENODEV);
> +
> + pca9633_leds = devm_kzalloc(&client->dev,
> + sizeof(struct led_info) * count, GFP_KERNEL);
> + if (!pca9633_leds)
> + return ERR_PTR(-ENOMEM);
> +
> + for_each_child_of_node(np, child) {
> + struct led_info led;
> + u32 reg;
> + int res;
> +
> + led.name =
> + of_get_property(child, "label", NULL) ? : child->name;
> + led.default_trigger =
> + of_get_property(child, "linux,default-trigger", NULL);
> + res = of_property_read_u32(child, "reg", ®);
> + if (res != 0)
> + continue;
> + pca9633_leds[reg] = led;
> + }
> + pdata = devm_kzalloc(&client->dev,
> + sizeof(struct pca9633_platform_data), GFP_KERNEL);
> + if (!pdata)
> + return ERR_PTR(-ENOMEM);
> +
> + pdata->leds.leds = pca9633_leds;
> + pdata->leds.num_leds = count;
> +
> + return pdata;
> +}
> +
> +static const struct of_device_id of_pca9633_match[] = {
> + { .compatible = "nxp,pca963x", },
> + {},
> +};
> +#else
> +static struct pca9633_platform_data *
> +pca9633_dt_init(struct i2c_client *client)
> +{
> + return ERR_PTR(-ENODEV);
> +}
> +#endif
> +
> static int pca9633_probe(struct i2c_client *client,
> const struct i2c_device_id *id)
> {
> @@ -102,6 +158,14 @@ static int pca9633_probe(struct i2c_client *client,
>
> pdata = client->dev.platform_data;
>
> + if (!pdata) {
> + pdata = pca9633_dt_init(client);
> + if (IS_ERR(pdata)) {
> + dev_warn(&client->dev, "could not parse configuration\n");
> + pdata = NULL;
> + }
> + }
> +
> if (pdata) {
> if (pdata->leds.num_leds <= 0 || pdata->leds.num_leds > 4) {
> dev_err(&client->dev, "board info must claim at most 4 LEDs");
> @@ -181,6 +245,7 @@ static struct i2c_driver pca9633_driver = {
> .driver = {
> .name = "leds-pca9633",
> .owner = THIS_MODULE,
> + .of_match_table = of_match_ptr(of_pca9633_match),
> },
> .probe = pca9633_probe,
> .remove = pca9633_remove,
--
To unsubscribe from this list: send the line "unsubscribe linux-leds" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
