On Wed, Apr 24, 2013 at 04:40:44PM +0900, Simon Horman wrote: > On Wed, Apr 24, 2013 at 02:06:00AM +0200, Laurent Pinchart wrote: > > Hello, > > > > This patch set adds support for the TPU PWM unit found in the sh73a0 and > > r8a7740 SoCs. It deprecates and removes the leds-renesas-tpu driver in favor > > of a combination of leds-pwm and pwm-rmob. > > > > I've tested the code on Armadillo only as I don't have access to a kota2 > > board. This is why I've added backlight support to Armadillo as part of this > > set. > > > > As an added bonus patches 7/9 and 8/9 remove function GPIOs support from the > > sh73a0 platform. Along with the other PFC-related patches recently posted on > > the list, mach-shmobile is now free of function GPIOs. Any volunteer to > > migrate arch/sh ? :-) > > > > The patches are based on a merge of "[PATCH 00/37] Fully migrate r8a7740 to > > pinctrl", "[PATCH 0/4] sh73a0: Expose the PFC-controller SDHI power gate as a > > regulator" and "[PATCH] sh-pfc: r8a7740: Add bias (pull-up/down) pinconf > > support". > > > > Laurent Pinchart (9): > > sh-pfc: sh73a0: Add TPU pin groups and functions > > sh-pfc: r8a7740: Add TPU pin groups and functions > > pwm: Add Renesas Mobile TPU PWM driver > > ARM: mach-shmobile: clock-r8a7740: add TPU PWM support > > ARM: mach-shmobile: armadillo800eva: Add backlight support > > ARM: mach-shmobile: kota2: Use leds-pwm + pwm-rmob > > sh-pfc: sh73a0: Remove function GPIOs > > ARM: shmobile: sh73a0: Remove all GPIOs > > leds: Remove leds-renesas-tpu driver > > > > arch/arm/mach-shmobile/board-armadillo800eva.c | 51 ++- > > arch/arm/mach-shmobile/board-kota2.c | 178 +++++--- > > arch/arm/mach-shmobile/clock-r8a7740.c | 4 +- > > arch/arm/mach-shmobile/clock-sh73a0.c | 8 +- > > arch/arm/mach-shmobile/include/mach/sh73a0.h | 373 +-------------- > > drivers/leds/Kconfig | 12 - > > drivers/leds/Makefile | 1 - > > drivers/leds/leds-renesas-tpu.c | 336 -------------- > > drivers/pinctrl/sh-pfc/pfc-r8a7740.c | 50 ++ > > drivers/pinctrl/sh-pfc/pfc-sh73a0.c | 608 +++++++++---------------- > > drivers/pwm/Kconfig | 7 + > > drivers/pwm/Makefile | 1 + > > drivers/pwm/pwm-rmob.c | 462 +++++++++++++++++++ > > include/linux/platform_data/leds-renesas-tpu.h | 14 - > > include/linux/platform_data/pwm-rmob.h | 18 + > > 15 files changed, 913 insertions(+), 1210 deletions(-) > > delete mode 100644 drivers/leds/leds-renesas-tpu.c > > create mode 100644 drivers/pwm/pwm-rmob.c > > delete mode 100644 include/linux/platform_data/leds-renesas-tpu.h > > create mode 100644 include/linux/platform_data/pwm-rmob.h > > I have rebased the pinmux branch on renesas-boards3-for-v3.10 to > supply dependencies. That tag includes the renesas-pinmux2-for-v3.10 > tag which the pinmux branch was previously based on. > > I have applied this entire series on the resulting pinmux branch. > > I plan to push this when I tag renesas-next-20130424 later today. > If not I will tag and push renesas-next-20130425 tomorrow. As there has been subsequent discussion and a v2 of this series posted, and I have dropped the "[PATCH 0/4] sh73a0: Expose the PFC-controller SDHI power gate as a regulator" series for similar reasons; I have dropped these patches for now. -- To unsubscribe from this list: send the line "unsubscribe linux-leds" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
